GUHRING
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.05 ~ 1.92 | 0.4 ~ 13.2 | General Steel[○] | Cobalt HSS | 25 ~ 30 | - | N/A | - | N/A |
EIKOSHA
TAS Counterbore with Drill for Small Plate Screws DCBSTA
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 14 | 11.5 ~ 32 | General Steel[○] | High-speed steel | 60 ~ 102 | Straight Shank | N/A | - | N/A |
EIKOSHA
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.05 ~ 12 | 12 ~ 38 | General Steel[○] | Powder high-speed steel | 50 ~ 90 | Straight Shank | Available | TiAlN | N/A |
EIKOSHA
Drill Bit for Pipe (Straight Shank) PTDS
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
6 ~ 10.7 | 4 ~ 8 | General Steel[○] | Cobalt HSS | 110 ~ 125 | Straight Shank | N/A | - | N/A |
EIKOSHA
Drill Bit for Pipe (Tapered Shank) PTDT
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
7.8 ~ 55.2 | 5 ~ 25 | General Steel[○] | Cobalt HSS | 115 ~ 275 | Taper shank | N/A | - | N/A |
EIKOSHA
Small Plate Screw Drill with Step for Sinking Use DCB-SSM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 9 | 11.5 ~ 24.25 | General Steel[○] | High-speed steel | 65 ~ 90 | Straight Shank | Available | Other | N/A |
EIKOSHA
Hexagonal Bolt Drill with Step for Submerged Use R Type DCB-TRM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
5.3 ~ 25 | 22 ~ 70 | General Steel[○] | High-speed steel | 120 ~ 275 | Taper shank | N/A | - | N/A |
EIKOSHA
Hexagonal Bolt Drill with Step for Submerged Use Z Type DCB-TZM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 33 | 13 ~ 100 | General Steel[○] | High-speed steel | 110 ~ 335 | Taper shank | N/A | - | N/A |
EIKOSHA
Hexagonal Bolt Drill with Step for Submerged Use DCB-SRM
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.4 ~ 20 | 13 ~ 45 | General Steel[○] | High-speed steel | 65 ~ 145 | Straight Shank | Available | Other | N/A |
EIKOSHA
Counterbore with Drill for Bolts with Hexagonal Holes DCB
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.5 ~ 20 | 10 ~ 45 | General Steel[○] | High-speed steel | 48 ~ 189 | Straight Shank / Taper shank | N/A | - | N/A |
NACHI(FUJIKOSHI)
G Cobalt Straight Shank Drill GCOSD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.3 ~ 10.5 | 29 ~ 65 | General Steel[○] | Cobalt HSS | 73 ~ 137 | Straight Shank | Available | TiN | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.17 ~ 1.5 | 2.5 ~ 18 | General Steel[○] | Cobalt HSS | 18.6 ~ 35 | Straight Shank | N/A | Other | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.5 ~ 1 | 8 ~ 15 | General Steel[○] | Cobalt HSS | 25 ~ 35 | Straight Shank | Available | TiN | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 ~ 9.7 | 41 ~ 116 | General Steel[○] | High-speed steel | 73 ~ 166 | Straight Shank | Available | For General Steels (AlCrN, etc.) | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
1.1 | 14 | General Steel[○] | Cobalt HSS | 36 | Straight Shank | Available | For General Steels (AlCrN, etc.) | N/A |
NACHI(FUJIKOSHI)
G Long Drill, Long Groove Type GNLSD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
3.5 ~ 10 | 180 ~ 200 | General Steel[○] | Cobalt HSS | 300 ~ 350 | Straight Shank | Available | TiN | N/A |
NACHI(FUJIKOSHI)
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
8.3 | 125 | General Steel[○] | Cobalt HSS | 200 | Straight Shank | Available | TiN | N/A |
NACHI(FUJIKOSHI)
Cobalt Straight Shank Long Drill COLSD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2.5 ~ 8 | 75 ~ 200 | General Steel[○] | Cobalt HSS | 150 ~ 300 | Straight Shank | N/A | Non-Coated | N/A |
NACHI(FUJIKOSHI)
G Tapered Shank Long Drill GLTD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
19.4 | 200 | General Steel[○] | High-speed steel | 300 | Taper shank | Available | TiN | N/A |
NACHI(FUJIKOSHI)
G Long Tapered Shank Oil Hole Drill GLTDOH
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
5 ~ 50 | 200 ~ 600 | General Steel[○] | Cobalt HSS | 300 ~ 800 | Taper shank | Available | TiN | Available |
NACHI(FUJIKOSHI)
AG Power Semi-Long Drill AGPSLSD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 | 41 | General Steel[○] | Cobalt HSS | 66 | Straight Shank | Available | For General Steels (AlCrN, etc.) | N/A |
TOYO DRILL
High Speed Steel Tough Drill TFD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
2 | - | General Steel[○] | Powder high-speed steel | 55 | Straight Shank | N/A | - | N/A |
THE CUT
Small Diameter Drill For NC Stainless Steel, Mini-Maru NC-SUS-RD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
0.4 | 4.5 | General Steel[○] | Cobalt HSS | 40 | End Mill Shank | N/A | - | - |
THE CUT
Straight Shank Drill Powerful Kiri-Maru TC-SSD
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
12.2 | 78 | General Steel[○] | High-grade Powdered High-Speed Steel | 149 | Straight Shank | N/A | - | - |
THE CUT
Hole diameter (drill diameter) D(mm) | Groove Length L(mm) | work material | Tool Material Type | Overall Length L(mm) | Shank Type | Coating Y/N | Coating Type | With/without Oil Hole |
---|---|---|---|---|---|---|---|---|
8.5 ~ 28 | 85 ~ 175 | General Steel[○] | High-speed steel | 168 ~ 295 | Taper shank | N/A | - | - |