Rejestracja
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Drill Bits (Shank Type: End Mill Shank Strona 4)

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • Carbide Twisted V Drill, Long Size for Models H7-H8
      • Volume Discount

      OMIKOGYO

      Carbide Twisted V Drill, Long Size for Models H7-H8

      For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      10115Cast Iron[○] / Aluminum[○] / Copper[○]Carbide165End Mill ShankN/A-Available
      Cena (bez VAT) od:
      320.66 €
      Standardowa data wysyłki:
      10 dni robocze
      Konfiguruj
    • End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525

        GUHRING

        End Mill Shank Drill 12 X D, with Oil Hole, RT 100 Double Margin 5525

        The use of a double margin provides excellent straightness and enables highly accurate deep drilling. Internal lubrication enables high performance drilling without steps.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2050 ~ 258-Carbide90 ~ 310End Mill ShankAvailableOtherAvailable
        Cena (bez VAT) od:
        195.81 €
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • End Mill Shank Type 3 x D RT100U 5514
        • Volume Discount

        GUHRING

        End Mill Shank Type 3 x D RT100U 5514

        [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2020 ~ 79General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide62 ~ 131End Mill ShankAvailableOtherN/A
        Cena (bez VAT) od:
        90.09 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
        • Volume Discount

        GUHRING

        End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

        [Features]· Internal lubrication enables high performance drilling without steps.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 2020 ~ 79General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide62 ~ 131End Mill ShankAvailableOtherAvailable
        Cena (bez VAT) od:
        117.85 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • End Mill Shank Drill 5 X D 3-Flute FT200G 5518

          GUHRING

          End Mill Shank Drill 5 X D 3-Flute FT200G 5518

          Has 3 cutting edges for excellent cutting balance, enabling highly circular, highly accurate, high-efficiency drilling.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3 ~ 2028 ~ 101-Carbide66 ~ 153End Mill ShankN/A-N/A
          Cena (bez VAT) od:
          105.37 €
          Standardowa data wysyłki:
          8 dni robocze
          Konfiguruj
        • End Mill Shank Type 5xD RT100U 5515
          • Volume Discount

          GUHRING

          End Mill Shank Type 5xD RT100U 5515

          [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3 ~ 2028 ~ 101General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
          Cena (bez VAT) od:
          105.48 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
          • Volume Discount

          GUHRING

          End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

          [Features]· Internal lubrication enables high performance drilling without steps.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3 ~ 2028 ~ 101General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]Carbide66 ~ 153End Mill ShankAvailableOtherAvailable
          Cena (bez VAT) od:
          111.73 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • End Mill Shank Drill 7 X D for Cast Iron Only RT100R 6502

            GUHRING

            End Mill Shank Drill 7 X D for Cast Iron Only RT100R 6502

            Blade shape suitable for FC/FCD and with rounded corners for excellent abrasion resistance, also reducing burrs on the far side when machining through holes. Longer life than conventional FC drills. Internal lubrication enables high performance drilling without steps.
            Czytaj dalej
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            4 ~ 2037.5 ~ 190-Carbide75 ~ 244End Mill ShankAvailableOtherAvailable
            Cena (bez VAT) od:
            222.32 €
            Standardowa data wysyłki:
            8 dni robocze
            Konfiguruj
          • End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

              GUHRING

              End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

              Internal lubrication enables high performance drilling without steps.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              3 ~ 2030 ~ 190General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide70 ~ 244End Mill ShankAvailableOtherAvailable
              Cena (bez VAT) od:
              161.89 €
              Standardowa data wysyłki:
              8 dni robocze
              Konfiguruj
            • End Mill Shank Drill Stub GU500 512
              • Volume Discount

              GUHRING

              End Mill Shank Drill Stub GU500 512

              This highly versatile coated drill can handle materials from general steel and nonferrous metals to cast iron and stainless steel.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 9.612 ~ 43General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○]Cobalt HSS44 ~ 93End Mill ShankAvailableTiNN/A
              Cena (bez VAT) od:
              15.78 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • End Mill Shank Drill Regular GU500 511
              • Volume Discount

              GUHRING

              End Mill Shank Drill Regular GU500 511

              This highly versatile coated drill can handle materials from general steel and nonferrous metals to cast iron and stainless steel.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 2024 ~ 125General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○]Cobalt HSS56 ~ 191End Mill ShankAvailableTiNN/A
              Cena (bez VAT) od:
              16.92 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • End Mill Shank Drill Straight Groove Type 10 X D with Oil Hole, RT150 GG, Double Margin 5513

                GUHRING

                End Mill Shank Drill Straight Groove Type 10 X D with Oil Hole, RT150 GG, Double Margin 5513

                Straight groove and double margin provide excellent rectilinearity ideal for machining castings, angled drilling, etc. up to 10 x D.
                Czytaj dalej
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1642 ~ 207-Carbide91 ~ 260End Mill ShankN/A-Available
                Cena (bez VAT) od:
                138.06 €
                Standardowa data wysyłki:
                8 dni robocze
                Konfiguruj
              • CoroDrill Delta-C, Carbide Solid Drill

                  SANDVIK

                  CoroDrill Delta-C, Carbide Solid Drill

                  Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.
                  Czytaj dalej
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  13 ~ 14.556 ~ 59General Steel[○] / High Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide124 ~ 133End Mill ShankAvailableTiAlNAvailable
                  Cena (bez VAT) od:
                  493.06 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • EZ Drill for Use with Heat-Resistant Alloy (EZS Type)

                    DIJET

                    EZ Drill for Use with Heat-Resistant Alloy (EZS Type)

                    [Features]· It is a tool with excellent abrasion resistance.
                    Czytaj dalej
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    3.2 ~ 11.918 ~ 60General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[◎]Carbide71 ~ 122End Mill ShankAvailable-Available
                    Cena (bez VAT) od:
                    123.28 €
                    Standardowa data wysyłki:
                    8 dni robocze
                    Konfiguruj
                  • S-Cut Drill SCDMS / L

                      DIJET

                      S-Cut Drill SCDMS / L

                      It has good wear resistance and chip removal, can be used for a wide range of materials and is abrasion resistant, corrosion resistant and heat resistant.
                      Czytaj dalej
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      10 ~ 3035 ~ 180General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide93 ~ 270End Mill ShankAvailableTiNAvailable
                      Cena (bez VAT) od:
                      220.92 €
                      Standardowa data wysyłki:
                      8 dni robocze
                      Konfiguruj
                    • Drill SDS-CR1

                        DIJET

                        Drill SDS-CR1

                        [Features]· It is a tool with excellent abrasion resistance.
                        Czytaj dalej
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.57General Steel[○] / Cast Iron[◎] / Aluminum[○]Carbide40End Mill ShankN/ANon-CoatedN/A
                        Cena (bez VAT) od:
                        16.65 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Top Solid Drill for Cast Iron TOP-SLD

                          DIJET

                          Top Solid Drill for Cast Iron TOP-SLD

                          As it is made of carbide, it has a high hardness and modulus of elasticity and can be used for machining castings.
                          Czytaj dalej
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          6 ~ 24.565 ~ 170Cast Iron[○]Carbide120 ~ 250End Mill ShankN/ANon-CoatedN/A
                          Cena (bez VAT) od:
                          177.54 €
                          Standardowa data wysyłki:
                          8 dni robocze
                          Konfiguruj
                        • Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC

                            KYOWA SEIKO

                            Carbide Solid Pivot Type Drill DLC Coat Specifications KDR -DLC

                            [Specifications]· Shape: Straight Shank / End Mill Shank Drill (carbide)· Material: Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎], Resin [◎]
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.09 ~ 30.9 ~ 25Aluminum[◎] / Copper[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankAvailableDLCN/A
                            Cena (bez VAT) od:
                            64.18 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Carbide Solid Pivot Type Flat Drill KDR-F
                            • Volume Discount

                            KYOWA SEIKO

                            Carbide Solid Pivot Type Flat Drill KDR-F

                            [Specifications]· Shape: Straight Shank / End Mill Shank Drill (carbide)· Material: Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎] / aluminum [○] / copper [○] / resin [○]
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.5 ~ 35 ~ 24General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]Carbide38 ~ 50End Mill ShankN/A-N/A
                            Cena (bez VAT) od:
                            40.99 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Electro-Plated Diamond Drill Ceramic Drill

                              OSG

                              Electro-Plated Diamond Drill Ceramic Drill

                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              2.5 ~ 139 ~ 48--41 ~ 105End Mill ShankN/ANon-Coated-
                              Cena (bez VAT) od:
                              45.43 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • 3-Flute Oil Hole Carbide 10D Type TRS-HO-10D
                              • Volume Discount

                              OSG

                              3-Flute Oil Hole Carbide 10D Type TRS-HO-10D

                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              5.5 ~ 11.578 ~ 155General Steel[◎] / Cast Iron[◎]Carbide128 ~ 215End Mill ShankAvailableOtherAvailable
                              Cena (bez VAT) od:
                              122.96 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • P5D for Phoenix Series Phoenix Drills 5D

                                OSG

                                P5D for Phoenix Series Phoenix Drills 5D

                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                21 ~ 33.5120 ~ 183-Carbide184 ~ 261End Mill ShankN/ANon-CoatedN/A
                                Cena (bez VAT) od:
                                537.60 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Aqua Drill EX Semi-Long AQDEXSL

                                  NACHI(FUJIKOSHI)

                                  Aqua Drill EX Semi-Long AQDEXSL

                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  2 ~ 2.924 ~ 33General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide56 ~ 64End Mill ShankAvailableOtherN/A
                                  Cena (bez VAT) od:
                                  105.72 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

                                    NACHI(FUJIKOSHI)

                                    AQDEXZOH3D Aqua Drill EX Flat Oil Hole 3D

                                    Can perform highly efficient flat hole drilling up to a hole depth of 3D. Drill with lubricant hole capable of working stainless steel.
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    6.530General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Carbide88End Mill ShankAvailableOtherAvailable
                                    Cena (bez VAT) od:
                                    147.24 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • 2D Type Indexable Drill, P2D

                                      OSG

                                      2D Type Indexable Drill, P2D

                                      Indexable drills that can stably perform hole drilling with 2D depth.
                                      Czytaj dalej
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide121 ~ 160End Mill ShankN/ANon-CoatedAvailable
                                      Cena (bez VAT) od:
                                      316.60 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • Indexable Drill 3D Type P3D

                                        OSG

                                        Indexable Drill 3D Type P3D

                                        Indexable insert drill that can perform stable drilling with 3D depth.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        21 ~ 50.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide142 ~ 252End Mill ShankN/ANon-CoatedAvailable
                                        Cena (bez VAT) od:
                                        355.70 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Indexable Drill 4D Type P4D

                                          OSG

                                          Indexable Drill 4D Type P4D

                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          21 ~ 33.5-General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○]Carbide163 ~ 227End Mill ShankN/ANon-CoatedAvailable
                                          Cena (bez VAT) od:
                                          505.90 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • Aqua Drill EX Flat Long Shank AQDEXZLS

                                            NACHI(FUJIKOSHI)

                                            Aqua Drill EX Flat Long Shank AQDEXZLS

                                            Flat drill with a lower neck length of 10D and good hole drilling performance.
                                            Czytaj dalej
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            3.7 ~ 7.918 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide100 ~ 120End Mill ShankAvailableOtherN/A
                                            Cena (bez VAT) od:
                                            127.62 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • Micro Drill "NEO PRO" Semi-Long Blades
                                            • ZNIŻKA

                                            ATOM

                                            Micro Drill "NEO PRO" Semi-Long Blades

                                            A series that achieves stable long life developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
                                            Czytaj dalej
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            0.04 ~ 0.990.6 ~ 11General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]Carbide38End Mill ShankAvailableFor General Steels (AlCrN, etc.)N/A
                                            Cena (bez VAT) od:
                                            41.11 €
                                            Cena (bez VAT) od:
                                            Cena specjalna
                                            Standardowa data wysyłki:
                                            Towar dostępny w magazynie: 1 dzień roboczy
                                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                                            Konfiguruj
                                          • Carbide 2-Flute Leading Drill 60° D921X

                                              7 LEADERS

                                              Carbide 2-Flute Leading Drill 60° D921X

                                              [Features]· 60° leading drill.· Prevents chipping of the tip by maintaining the tip part at 120°.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                              Czytaj dalej
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                                              Cena (bez VAT) od:
                                              32.24 €
                                              Standardowa data wysyłki:
                                              6 dni robocze
                                              Konfiguruj
                                            • Carbide 2-Flute Leading Drill 90° D922X

                                                7 LEADERS

                                                Carbide 2-Flute Leading Drill 90° D922X

                                                [Features]· 90° leading drill.· Prevents the chipping of the tip.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                Czytaj dalej
                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                2 ~ 64 ~ 12General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 70End Mill Shank-Other-
                                                Cena (bez VAT) od:
                                                32.24 €
                                                Standardowa data wysyłki:
                                                6 dni robocze
                                                Konfiguruj
                                              • Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                                  7 LEADERS

                                                  Carbide 2-Flute Leading Drill 90° Long AlTiN D932X

                                                  [Features]· 90° Long Shank Leading Drill· Prevents chipping of the tip by maintaining the tip part at 120°.· The long protrusion enables leading cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                  Czytaj dalej
                                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                  3 ~ 209 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide75 ~ 250End Mill Shank-Other-
                                                  Cena (bez VAT) od:
                                                  47.90 €
                                                  Standardowa data wysyłki:
                                                  6 dni robocze
                                                  Konfiguruj
                                                • Carbide 2-Flute Leading Drill 142° D924X

                                                    7 LEADERS

                                                    Carbide 2-Flute Leading Drill 142° D924X

                                                    [Features]· 142° Leading Drill· Use for centering machining for tip angle 140°drill.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                                    Czytaj dalej
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    0.5 ~ 201 ~ 40General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38 ~ 130End Mill Shank-Other-
                                                    Cena (bez VAT) od:
                                                    32.24 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Carbide Flat Drill ADFLS-2D
                                                    • Volume Discount

                                                    OSG

                                                    Carbide Flat Drill ADFLS-2D

                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3 ~ 1815 ~ 78General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide100 ~ 230End Mill ShankAvailableOtherN/A
                                                    Cena (bez VAT) od:
                                                    89.70 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Medium Type Drill for High-Speed Machining FS-GDN

                                                    Carbide drill medium type for high-speed machining with excellent heat resistance and abrasion resistance.
                                                    Czytaj dalej
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3.5 ~ 4.530 ~ 36General Steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]Carbide60 ~ 71End Mill ShankAvailableTiAlNN/A
                                                    Cena (bez VAT) od:
                                                    92.70 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill
                                                    • Volume Discount

                                                    SANDVIK

                                                    CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill

                                                    [Features]General Purpose High Performance Carbide Solid Drill· Coolant Through
                                                    Czytaj dalej
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    3.35 ~ 6.9-General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide142End Mill ShankAvailableOtherAvailable
                                                    Cena (bez VAT) od:
                                                    135.06 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Solid Carbide Drill 2D Type AD-2D
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Drill 2D Type AD-2D

                                                    [Features]· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                    Czytaj dalej
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    2 ~ 1214 ~ 55General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide62 ~ 102End Mill ShankAvailableOtherN/A
                                                    Cena (bez VAT) od:
                                                    37.21 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Solid Carbide Drill 4D Type AD-4D
                                                    • Volume Discount

                                                    OSG

                                                    Solid Carbide Drill 4D Type AD-4D

                                                    [Features]· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Wide flutes for improved chip discharging Wave-shaped flutes that finely fragment the chips
                                                    Czytaj dalej
                                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                    2 ~ 2020 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
                                                    Cena (bez VAT) od:
                                                    43.71 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                      OSG

                                                      Solid Carbide Drill 8D Type With Oil Hole ADO-8D

                                                      [Features]· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                      Czytaj dalej
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      3 ~ 1333 ~ 143General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Carbide80 ~ 206End Mill ShankAvailableOtherAvailable
                                                      Cena (bez VAT) od:
                                                      89.32 €
                                                      Standardowa data wysyłki:
                                                      6 dni robocze
                                                      Konfiguruj
                                                    • Solid Carbide Drill 10D Type with Oil Hole ADO-10D
                                                      • Volume Discount

                                                      OSG

                                                      Solid Carbide Drill 10D Type with Oil Hole ADO-10D

                                                      [Features]· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                                      Czytaj dalej
                                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                      3 ~ 1240 ~ 155General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide90 ~ 215End Mill ShankAvailableOtherAvailable
                                                      Cena (bez VAT) od:
                                                      115.82 €
                                                      Standardowa data wysyłki:
                                                      6 dni robocze
                                                      Konfiguruj
                                                    • Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                                        OSG

                                                        Solid Carbide Pilot Drill With Oil Hole For Extra-Long Drills ADO-PLT

                                                        [Features]· Carbide drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
                                                        Czytaj dalej
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        3.03 ~ 12.0315 ~ 60General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]Carbide65 ~ 120End Mill ShankAvailableOtherAvailable
                                                        Cena (bez VAT) od:
                                                        98.10 €
                                                        Standardowa data wysyłki:
                                                        6 dni robocze
                                                        Konfiguruj
                                                      • MUGEN Flat Drill MFD
                                                        • Volume Discount

                                                        NS TOOL

                                                        MUGEN Flat Drill MFD

                                                        [Features]· MUGEN Flat Drill makes drilling holes in inclined or curved surfaces easy.· Adopts a thinning shape (spiral thinning (⌀1 to ⌀2.9) / triple thinning (⌀3 to ⌀6)) developed to suit each size, a double margin (⌀2.6 or more), and a long neck shape to achieve holes with good and stable accuracy.· MFD has a flat bottom blade that flattens out the bottoms of blind holes and is optimal for counterbore machining and thread cutting (thread milling) pilot holes.· Through-holes can be drilled without the generation of burrs.· Adopts a reliable MUGEN coating to support a range of work material from mild steel to stainless steel.· Reduce drilling process time and improve machining efficiency with this 1 tool.
                                                        Czytaj dalej
                                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                        1 ~ 1.92 ~ 11.8General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○]Carbide55End Mill ShankAvailableTiAlNN/A
                                                        Cena (bez VAT) od:
                                                        52.40 €
                                                        Standardowa data wysyłki:
                                                        6 dni robocze
                                                        Konfiguruj
                                                      • Aqua Drill EX Power Feed 2D PF2D

                                                          NACHI(FUJIKOSHI)

                                                          Aqua Drill EX Power Feed 2D PF2D

                                                          [Features]· A 2D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                          Czytaj dalej
                                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                          58General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide45 ~ 61End Mill ShankAvailableOther-
                                                          Cena (bez VAT) od:
                                                          109.68 €
                                                          Standardowa data wysyłki:
                                                          6 dni robocze
                                                          Konfiguruj
                                                        • Aqua Drill EX Power Feed 4D PF4D

                                                            NACHI(FUJIKOSHI)

                                                            Aqua Drill EX Power Feed 4D PF4D

                                                            [Features]· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
                                                            Czytaj dalej
                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                            --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide98End Mill ShankAvailableOther-
                                                            Cena (bez VAT) od:
                                                            157.26 €
                                                            Standardowa data wysyłki:
                                                            6 dni robocze
                                                            Konfiguruj
                                                          • Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A
                                                            • Volume Discount

                                                            OKAZAKI SEIKO

                                                            Solid Drill (with Oil Hole) for Ultra-Hard Steel, For 5D SDOX5A

                                                            [Features]· Ideal for machining stainless steel and other difficult-to-cut materials.· New design of the tip shape and new flute shape realize smooth cutting powder ejection[Specifications]· Coolant through specification (with OH)· For 5D
                                                            Czytaj dalej
                                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                            3.85 ~ 11.85-General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎]Carbide-End Mill ShankAvailableTiAlNAvailable
                                                            Cena (bez VAT) od:
                                                            77.11 €
                                                            Standardowa data wysyłki:
                                                            10 dni robocze
                                                            Konfiguruj