Rejestracja
1
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • Shank Type
  • Coating Y/N
  • Drill Bits

    Drill bits are a type of cutting tool to drill holes in work materials. They are used with machine tools such as drill press, lathe, milling machine and machining center. Drill bit materials include alloy carbide, high speed steel powder, high-speed steel, and some of them have coatings such as silicone-based, TiAlN-based, TiCN-based, TiN-based coatings, or surface treatment such as steam oxide treatment for enhanced oil retention on surface. Additionally, there is also a type of machining called thinning, given to the bit tip to reduce the thrust load applied to it when drilling. There are different shapes of thinning such as X-shape (for machining deep holes), R-shape (for machining stainless-steel-based workpieces) and S-shaped (for machining cast-iron- or non-ferrous-based workpieces); each one of them is used accordingly for different features and applications. In recent years, flat drill bits, which can drill holes without bending even on round surfaces, are attracting attention.
    • SANDVIK Trepanning Tool

        SANDVIK

        SANDVIK Trepanning Tool

        [Specifications]・Grade: Indexable insert included・Drill type: Indexable insert drill・eClass-5.1: 21010103For trepanning operations Excellent reliability in unstable applications and lathe applications Internal coolant supply Stack drilling cartridges available.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        60 ~ 110-General Steel[○] / Stainless Steel[○] / Cast Iron[○]------
        Cena standardowa (bez VAT):
        1,603.31 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS
        • ZNIŻKA
        • Volume Discount

        OSG

        Stub Model for Stainless Steel / Soft Steels, EX-SUS-GDS

        [Features] A drill bit with an overall length of 38 mm to 170 mm.[Features] Can be used for stainless steel, mild steel, copper alloys, etc.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        0.5 ~ 323 ~ 90General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS38 ~ 170End Mill Shank / Straight ShankAvailableTiNN/A
        Cena standardowa (bez VAT):
        11.10 €
        Cena standardowa (bez VAT):
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Hard Cut Drill

          SANDVIK

          Hard Cut Drill

          Broken socket strip removal toolIt removes broken socket strips with a strong cutting edge.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2 ~ 6---30 ~ 60Straight Shank--N/A
          Cena standardowa (bez VAT):
          51.09 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • For Broken Tap Removal EX-H-DRL
          • Volume Discount

          OSG

          For Broken Tap Removal EX-H-DRL

          Used for removing broken taps, drilling of hardened steel (58 ~ 68HRC), stellite, etc.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2 ~ 1210 ~ 60High Hardness Steel[◎]Carbide30 ~ 110End Mill Shank / Straight ShankN/ANon-CoatedN/A
          Cena standardowa (bez VAT):
          41.10 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Micro Drill Standard Tip Length
          • ZNIŻKA
          • Volume Discount

          ATOM

          Micro Drill Standard Tip Length

          A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.02 ~ 30.2 ~ 25General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
          Cena standardowa (bez VAT):
          28.41 €
          Cena standardowa (bez VAT):
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • TiAlN Coated Carbide Drill, Regular
          • Volume Discount

          MISUMI

          TiAlN Coated Carbide Drill, Regular

          [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          0.3 ~ 133 ~ 77General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
          Cena standardowa (bez VAT):
          22.57 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • SANDVIK CoroDrill 880 Indexable Insert Drill

            SANDVIK

            SANDVIK CoroDrill 880 Indexable Insert Drill

            [Specifications]・Drill type: Indexable insert drill・eClass-5.1: 21010103[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
            Czytaj dalej
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            12 ~ 84212.77 ~ 339.15General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]-295 ~ 404----
            Cena standardowa (bez VAT):
            613.85 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Carbide Step Drill Bit, With Custom Dimensions

              MISUMI

              Carbide Step Drill Bit, With Custom Dimensions

              [Features]・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              --General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide-End Mill ShankN/A-N/A
              Standardowa data wysyłki:
              9 dni robocze
              Konfiguruj
            • Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR
              • ZNIŻKA
              • Volume Discount

              OSG

              Regular Model for Stainless Steel / Soft Steels, EX-SUS-GDR

              A standard lineup of long flute end mill drills suited for machining of stainless steel, mild steel, aluminum alloy, and cupper alloy
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              2 ~ 3224 ~ 165General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS56 ~ 245End Mill Shank / Straight ShankAvailableTiNN/A
              Cena standardowa (bez VAT):
              13.40 €
              Cena standardowa (bez VAT):
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Toglon Hard Drill Regular ALT Coating
              • ZNIŻKA
              • Volume Discount

              IWATA TOOL

              Toglon Hard Drill Regular ALT Coating

              · 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              1 ~ 66 ~ 36Quenched and tempered steel[◎] / High Hardness Steel[○/◎] / Machinable Ceramics[○]Carbide50 ~ 120End Mill ShankAvailableTiAlNN/A
              Cena standardowa (bez VAT):
              89.60 €
              Cena standardowa (bez VAT):
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • SANDVIK CoroDrill 880 Insert for Drilling

                SANDVIK

                SANDVIK CoroDrill 880 Insert for Drilling

                [Specifications]・Insert clearance angle: n/s・Grade type: Hard metal・eClass-5.1: 21011901[Features]・Wiper geometry for best surface finish or higher feed possibilities・Optimized chip channels for accelerated chip evacuation・Easy identification thanks to laser marking with drill, insert, and screw codes on the drill shank・Two or four cutting edges depending on drill diameter・Optimized geometries assure high performance in most materials・Optimized grades assure longer insert tool life
                Czytaj dalej
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                --General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                Cena standardowa (bez VAT):
                20.54 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Solid Carbide Drill 20D Type With Oil Hole ADO-20D
                • Volume Discount

                OSG

                Solid Carbide Drill 20D Type With Oil Hole ADO-20D

                [Features]· Carbide 20D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                Czytaj dalej
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                3 ~ 1270 ~ 270General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide120 ~ 330End Mill ShankAvailableOtherAvailable
                Cena standardowa (bez VAT):
                148.48 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • SANDVIK CoroDrill Delta-C Solid Carbide Drill

                  SANDVIK

                  SANDVIK CoroDrill Delta-C Solid Carbide Drill

                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  1.5 ~ 20-Titanium[○]-32 ~ 187----
                  Cena standardowa (bez VAT):
                  76.38 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • SANDVIK CoroDrill 870 Exchangeable Tip Drill

                    SANDVIK

                    SANDVIK CoroDrill 870 Exchangeable Tip Drill

                    [Specifications]・eClass-5.1: 21010103[Features]・Secure and reliable cutting process・High penetration rates and excellent hole quality・Long, predictable tool life and high productivity・Low cost per hole・Internal coolant・Easy handling and secure tip changes・Optimized chip control and evacuation・Tailor Made options available for tool body and tips
                    Czytaj dalej
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    10.00 - 10.49 ~ 31.00 - 33.00-General Steel[○] / Stainless Steel[○] / Cast Iron[○]------
                    Cena standardowa (bez VAT):
                    356.62 €
                    Standardowa data wysyłki:
                    5 dni robocze
                    Konfiguruj
                  • Hi-Spec Micro Drill
                    • ZNIŻKA
                    • Volume Discount

                    ATOM

                    Hi-Spec Micro Drill

                    The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
                    Czytaj dalej
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.035 ~ 1.9950.4 ~ 22General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38 ~ 50End Mill ShankN/ANon-CoatedN/A
                    Cena standardowa (bez VAT):
                    40.91 €
                    Cena standardowa (bez VAT):
                    Cena specjalna
                    Standardowa data wysyłki:
                    Towar dostępny w magazynie: 1 dzień roboczy
                    Niektóre pozycje mogą zostać wysłane tego samego dnia
                    Konfiguruj
                  • Standard Solid Drill
                    • ZNIŻKA
                    • Volume Discount

                    ATOM

                    Standard Solid Drill

                    A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
                    Czytaj dalej
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.3 ~ 134 ~ 50General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide30 ~ 100Straight ShankN/ANon-CoatedN/A
                    Cena standardowa (bez VAT):
                    16.75 €
                    Cena standardowa (bez VAT):
                    Cena specjalna
                    Standardowa data wysyłki:
                    Towar dostępny w magazynie: 1 dzień roboczy
                    Niektóre pozycje mogą zostać wysłane tego samego dnia
                    Konfiguruj
                  • Gun Drill 50 X D EB100 5647

                      GUHRING

                      Gun Drill 50 X D EB100 5647

                      A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.
                      Czytaj dalej
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      2.5 ~ 8155 ~ 440-Carbide185 ~ 485-AvailableOtherAvailable
                      Cena standardowa (bez VAT):
                      321.34 €
                      Standardowa data wysyłki:
                      24 dni robocze
                      Konfiguruj
                    • Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D
                      • Volume Discount

                      OSG

                      Solid Carbide Drill 5D Type With Oil Hole ADO-SUS-5D

                      [Features]· Has a blade shape designed for sharpness and uses a "MEGA COOLER" oil hole, enabling stable machining and a longer service life, even when used for high efficiency work. 5D type with oil hole
                      Czytaj dalej
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      2 ~ 2018 ~ 140General Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]Carbide70 ~ 205End Mill Shank / Straight ShankAvailableOtherAvailable
                      Cena standardowa (bez VAT):
                      85.18 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Cermet Cera Drill CCD

                        TOYO DRILL

                        Cermet Cera Drill CCD

                        [Features]· Uses TiN-based tough cermet materials for excellent wear resistance and high toughness. Demonstrates high efficiency and high precision drilling during provisional sintering of fine ceramics.· The unique shape of the grooves and blade tips help minimize workpiece chipping when pulling out the drill.· Tip angle: 120°
                        Czytaj dalej
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        3.5-General Steel[○] / Machinable Ceramics[○]-50Straight ShankN/A-N/A
                        Cena standardowa (bez VAT):
                        77.17 €
                        Standardowa data wysyłki:
                        9 dni robocze
                        Konfiguruj
                      • HYP-HP-5D, Carbide drill with  WDI coating, up to 5xD

                          OSG

                          HYP-HP-5D, Carbide drill with WDI coating, up to 5xD

                          Carbide drill with WDI coating, up to 5xD - General purpose
                          Czytaj dalej
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          ---------
                          Cena standardowa (bez VAT):
                          24.50 €
                          Standardowa data wysyłki:
                          4 dni robocze
                          Konfiguruj
                        • EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

                            OSG

                            EX-SUS-GDS, HSSE drill with TIN coating, up to 3xD

                            HSSE drill with TIN coating, up to 3xD - For stainless steel, low carbon steel and cast aluminum
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            ---------
                            Cena standardowa (bez VAT):
                            87.20 €
                            Standardowa data wysyłki:
                            4 dni robocze
                            Konfiguruj
                          • DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
                            • Volume Discount

                            MISUMI

                            DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub

                            [Features]-Excellent chip evacuation and sharpness due to high spiral shape-Designed for frequent pre-drilling of M4 to M12 metric coarse holes-2 types of step angles are available for chamfering and cutting-Reduces chamfering process and achieves high drilling efficiency. (DLC-SC-SDR)-Relief holes can be machined simultaneously when drilling pilot holes for bolts (DLC-SF-SDR).
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            6.8 ~ 10.348 ~ 72Cast Iron[○] / Aluminum[◎] / Copper[○]Carbide104 ~ 136Straight ShankAvailableDLCN/A
                            Cena standardowa (bez VAT):
                            97.95 €
                            Standardowa data wysyłki:
                            5 dni robocze
                            Konfiguruj
                          • High-Speed Steel Drill, Straight Shank / Regular
                            • Volume Discount

                            MISUMI

                            High-Speed Steel Drill, Straight Shank / Regular【1 do 10 szt.】

                            [Features] Packing of commonly used sizes in packs-Two-shank drill with TiN-coated high-speed steel for general applications.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.2 ~ 133 ~ 101General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel / Cobalt HSS19 ~ 151Straight ShankAvailable / N/ATiNN/A
                            Cena standardowa (bez VAT):
                            6.75 €
                            Standardowa data wysyłki:
                            5 dni robocze
                            Konfiguruj
                          • High-Speed Steel Drill, Straight Shank / Long
                            • Volume Discount

                            MISUMI

                            High-Speed Steel Drill, Straight Shank / Long

                            [Features] A selection of commonly used sizes-Long shank drill with straight shank for deep drilling.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1085 ~ 185General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]High-speed steel125 ~ 265Straight ShankN/A-N/A
                            Cena standardowa (bez VAT):
                            8.18 €
                            Standardowa data wysyłki:
                            5 dni robocze
                            Konfiguruj
                          • Carbide Drill Carbide for High Hardness Steel (From 70HRC)
                            • Volume Discount

                            OSG

                            Carbide Drill Carbide for High Hardness Steel (From 70HRC)

                            Suitable for processing from 55-70 HRC. Drill for extra hard steel fusing stable processing with a proven cutting edge shape and high-dimensional coating for high hardness steel.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            2 ~ 1212 ~ 76High Hardness Steel[◎]Carbide42 ~ 120End Mill Shank / Straight ShankAvailableOtherN/A
                            Cena standardowa (bez VAT):
                            102.10 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Micro Drill 3.175 mm Shaft
                            • ZNIŻKA
                            • Volume Discount

                            ATOM

                            Micro Drill 3.175 mm Shaft

                            A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.04 ~ 1.50.4 ~ 10General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Carbide38End Mill ShankN/ANon-CoatedN/A
                            Cena standardowa (bez VAT):
                            28.41 €
                            Cena standardowa (bez VAT):
                            Cena specjalna
                            Standardowa data wysyłki:
                            Towar dostępny w magazynie: 1 dzień roboczy
                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                            Konfiguruj
                          • Gun Drill 25 X D EB100 5646

                              GUHRING

                              Gun Drill 25 X D EB100 5646

                              A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.
                              Czytaj dalej
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              2.5 ~ 1285 ~ 360-Carbide115 ~ 420-AvailableOtherAvailable
                              Cena standardowa (bez VAT):
                              258.34 €
                              Standardowa data wysyłki:
                              24 dni robocze
                              Konfiguruj
                            • Micro Drill Reamer, Type-N 701

                                GUHRING

                                Micro Drill Reamer, Type-N 701

                                [Features]· Blade diameter tolerance is +0, -0.004, suitable for high precision small diameter hole drilling.
                                Czytaj dalej
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                0.25 ~ 1.41.9 ~ 9.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[○] / Resin[○]Carbide25-N/A-N/A
                                Cena standardowa (bez VAT):
                                43.62 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Pivot Drill Semi-Long Blade

                                  ATOM

                                  Pivot Drill Semi-Long Blade

                                  Drill for precision and multiporous fine hole drilling with a minimum diameter of ø0.04 (diameter 0.04 mm). [Features] · Blade diameter tolerance +0 to -0.005. [Applications] · A wide range of materials are applicable, from general steel through to non-ferrous metals and resin.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.03 ~ 0.990.5 ~ 11General Steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○] / Resin[○]Carbide38End Mill ShankN/ANon-CoatedN/A
                                  Cena standardowa (bez VAT):
                                  32.57 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • Solid Carbide Drill 15D Type With Oil Hole ADO-15D
                                  • Volume Discount

                                  OSG

                                  Solid Carbide Drill 15D Type With Oil Hole ADO-15D

                                  [Features]· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials. Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life. Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life. The use of a middle margin improves stability when machining deep holes
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  3 ~ 1255 ~ 215General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]Carbide105 ~ 280End Mill ShankAvailableOtherAvailable
                                  Cena standardowa (bez VAT):
                                  129.55 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • HYP-HPO-5D, Carbide drill with internal coolant, WDI coating, up to 5xD

                                    OSG

                                    HYP-HPO-5D, Carbide drill with internal coolant, WDI coating, up to 5xD

                                    Carbide drill with internal coolant, WDI coating, up to 5xD - General purpose
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    ---------
                                    Cena standardowa (bez VAT):
                                    60.90 €
                                    Standardowa data wysyłki:
                                    4 dni robocze
                                    Konfiguruj
                                  • Universal drill bit set
                                    • Volume Discount

                                    MAKITA

                                    Universal drill bit set

                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    ---------
                                    Cena standardowa (bez VAT):
                                    25.68 €
                                    Standardowa data wysyłki:
                                    3 dni robocze
                                    Konfiguruj
                                  • TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

                                    [Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    0.38 ~ 2.76 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Carbide38End Mill ShankAvailableTiAlNN/A
                                    Cena standardowa (bez VAT):
                                    36.61 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
                                    • Volume Discount

                                    MISUMI

                                    TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade

                                    (DLC-SC-SDR)-Drilling and countersinking holes for screws can be done in one operation, resulting in highly efficient machining (countersink type)-Since relief holes can be drilled at the same time as drilling pilot holes for power strips, it is ideal for drilling pilot holes in thick panels that require relief (single-cut type).
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    3.4 ~ 10.321 ~ 72General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Carbide73 ~ 136Straight ShankAvailableTiAlNN/A
                                    Cena standardowa (bez VAT):
                                    81.59 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • TiN Coated High-Speed Steel Drill, Straight Shank / Regular
                                    • Volume Discount

                                    MISUMI

                                    TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1 do 10 szt.】

                                    With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    1 ~ 12.512 ~ 101General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Cobalt HSS34 ~ 151Straight ShankAvailableTiNN/A
                                    Cena standardowa (bez VAT):
                                    13.33 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • High-Speed Steel Drill, Tapered Shank / Regular Model
                                    • Volume Discount

                                    MISUMI

                                    High-Speed Steel Drill, Tapered Shank / Regular Model

                                    General purpose tapered shank drills that facilitate machining are available in rich lineups of 71 sizes
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    8.5 ~ 5075 ~ 220General Steel[○]High-speed steel156 ~ 369Taper shankN/A-N/A
                                    Cena standardowa (bez VAT):
                                    31.82 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • Aqua Drill 3-Flute AQD3F

                                      NACHI(FUJIKOSHI)

                                      Aqua Drill 3-Flute AQD3F

                                      Adopts three blade with excellent cutting balance. Adopt three blade with excellent cutting balance.
                                      Czytaj dalej
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      4.21 ~ 12.5522 ~ 51General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○]Carbide66 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
                                      Cena standardowa (bez VAT):
                                      111.82 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • Aqua Drill EX Flat AQDEXZ

                                        NACHI(FUJIKOSHI)

                                        Aqua Drill EX Flat AQDEXZ

                                        Countersinking drill with good drilling performance. Well suited for slanted surfaces and pilot drilling for tapping.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        0.5 ~ 15.81.65 ~ 72General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]Carbide47 ~ 115End Mill Shank / Straight ShankAvailableOtherN/A
                                        Cena standardowa (bez VAT):
                                        84.64 €
                                        Standardowa data wysyłki:
                                        5 dni robocze
                                        Konfiguruj
                                      • Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL
                                        • ZNIŻKA
                                        • Volume Discount

                                        OSG

                                        Carbide Micro Revolution Drill for Stainless Steel, MRS-GDL

                                        Long carbide drill bit with small diameter for machining stainless steel. Machining stainless steel provides stable durability.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        0.44 ~ 36 ~ 36Stainless Steel[◎]Carbide38 ~ 66End Mill Shank / Straight ShankAvailableOtherN/A
                                        Cena standardowa (bez VAT):
                                        33.20 €
                                        Cena standardowa (bez VAT):
                                        Cena specjalna
                                        Standardowa data wysyłki:
                                        Towar dostępny w magazynie: 1 dzień roboczy
                                        Niektóre pozycje mogą zostać wysłane tego samego dnia
                                        Konfiguruj
                                      • Medium Model for Stainless Steel / Soft Steels, EX-SUS-GDN
                                        • ZNIŻKA

                                        OSG

                                        Medium Model for Stainless Steel / Soft Steels, EX-SUS-GDN

                                        [Features] A drill bit with an overall length of 41 mm to 50 mm.[Features] Can be used for stainless steel, mild steel, copper alloys, etc.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        1 ~ 1.999 ~ 18General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎]High Vanadium HSS41 ~ 50End Mill ShankAvailableTiNN/A
                                        Cena standardowa (bez VAT):
                                        9.67 €
                                        Cena standardowa (bez VAT):
                                        Cena specjalna
                                        Standardowa data wysyłki:
                                        Towar dostępny w magazynie: 1 dzień roboczy
                                        Niektóre pozycje mogą zostać wysłane tego samego dnia
                                        Konfiguruj
                                      • MUGEN-COATING Miniature Drill MDR-R
                                        • Volume Discount

                                        NS TOOL

                                        MUGEN-COATING Miniature Drill MDR-R

                                        High precision specification ideal for precision parts machining. Diameter tolerance 0 to -0.005 mm
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        .0.4 ~ 11.2 ~ 10General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Carbide38End Mill ShankAvailableTiAlN-
                                        Cena standardowa (bez VAT):
                                        27.64 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Micro Gun Drill EB100 5024

                                          GUHRING

                                          Micro Gun Drill EB100 5024

                                          The tube is a solid carbide type integrated with the head, which increases torsional strength and suppresses vibration during machining. The screwdriver diameter is metric to support oil hole holders for machining centers.
                                          Czytaj dalej
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          1.2 ~ 3.245-Carbide90 ~ 100-N/A-Available
                                          Cena standardowa (bez VAT):
                                          306.08 €
                                          Standardowa data wysyłki:
                                          8 dni robocze
                                          Konfiguruj
                                        • Super U Drill - Cylindrical Shank

                                            SANDVIK

                                            Super U Drill - Cylindrical Shank

                                            With an indexable drill, balanced cutting and table feed up to twice as high are possible through stepped biting at the entrance, improving the precision of the processed hole.
                                            Czytaj dalej
                                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                            12.5 ~ 6328 ~ 220General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]-91 ~ 331End Mill Shank / Straight Shank--N/A
                                            Cena standardowa (bez VAT):
                                            592.95 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • Super U Drill - Hole Drilling Tip

                                              SANDVIK

                                              Super U Drill - Hole Drilling Tip

                                              Ideal for machining requiring deep cutting and a highly rigid tip
                                              Czytaj dalej
                                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                              14~16 ~ 53~63-General Steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]------
                                              Cena standardowa (bez VAT):
                                              28.10 €
                                              Standardowa data wysyłki:
                                              6 dni robocze
                                              Konfiguruj
                                            • VariDrill Solid Carbide Drill 8xD VDS403A

                                                WIDIA

                                                VariDrill Solid Carbide Drill 8xD VDS403A

                                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                                556General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Carbide94End Mill ShankAvailableTiAlNAvailable
                                                Cena standardowa (bez VAT):
                                                183.16 €
                                                Standardowa data wysyłki:
                                                6 dni robocze
                                                Konfiguruj