Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

Grooving / Cutting Off Holders

    • SANDVIK VDI to Coromant Capto Clamping Unit

        SANDVIK

        SANDVIK VDI to Coromant Capto Clamping Unit

        [Specifications]・Type: Clamping unit, Manually operated clamping unit, VDI basic holder・Cutting Direction: Right-hand, Left-hand, No-hand・eClass-5.1: 21021103Quick change clamping units will optimize the machine utilization by reducing both set-up time and tool change time significantly
        Czytaj dalej
        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
        ----Right-hand / Left-hand / No-hand-30 ~ 60
        Cena (bez VAT) od:
        966.08 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • SANDVIK Manual Clamping Unit for BMT Turrets

          SANDVIK

          SANDVIK Manual Clamping Unit for BMT Turrets

          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
          ----Right-hand / Left-hand--
          Cena (bez VAT) od:
          2,109.00 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • SANDVIK Coromant Capto to Rectangular Shank Adaptor

            SANDVIK

            SANDVIK Coromant Capto to Rectangular Shank Adaptor

            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
            ----Right-hand / Left-hand / No-hand-12 ~ 32
            Cena (bez VAT) od:
            578.77 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

              SANDVIK

              Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
              Outer Diameter Grooving / Cutting off1.5 ~ 3--Right-hand / Left-hand2 Corner10 ~ 16
              Cena (bez VAT) od:
              252.11 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • SANDVIK CoroCut 1-2 Cutting Unit for Parting and Grooving

                SANDVIK

                SANDVIK CoroCut 1-2 Cutting Unit for Parting and Grooving

                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                ---15 ~ 32Right-hand / Left-hand / No-hand--
                Cena (bez VAT) od:
                432.62 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • SANDVIK Coromant Capto 90° Reduction Adaptor

                  SANDVIK

                  SANDVIK Coromant Capto 90° Reduction Adaptor

                  ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                  ----Right-hand / Left-hand / No-hand--
                  Cena (bez VAT) od:
                  2,284.38 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • SANDVIK T-Max Q-Cut Cutting Unit for Parting and Grooving

                    SANDVIK

                    SANDVIK T-Max Q-Cut Cutting Unit for Parting and Grooving

                    ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                    ----Right-hand / Left-hand--
                    Cena (bez VAT) od:
                    432.62 €
                    Standardowa data wysyłki:
                    5 dni robocze
                    Konfiguruj
                  • SANDVIK T-Max Q-Cut Tool Block for Blades

                      SANDVIK

                      SANDVIK T-Max Q-Cut Tool Block for Blades

                      ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                      ----No-hand-19.05 ~ 40
                      Cena (bez VAT) od:
                      375.62 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • SANDVIK Manual Clamping Unit

                        SANDVIK

                        SANDVIK Manual Clamping Unit

                        [Specifications]・Type: Clamping unit, Manually operated clamping unit・Cutting Direction: Right-hand, Left-hand・eClass-5.1: 21021103, 21021105[Features]・High torque transmission・High bending strength・Quick change and automated tool change・Advanced nozzle technology for process security even at low pressures・Through-tool delivery of high-pressure coolant, from machine to cutting edge・Balanced and concentric・Self-centering
                        Czytaj dalej
                        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                        ----Right-hand / Left-hand-80 ~ 208
                        Cena (bez VAT) od:
                        1,848.85 €
                        Standardowa data wysyłki:
                        5 dni robocze
                        Konfiguruj
                      • SANDVIK CoroCut QD Tool Block for Blades

                          SANDVIK

                          SANDVIK CoroCut QD Tool Block for Blades

                          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                          ----Right-hand / Left-hand-19.5 ~ 40
                          Cena (bez VAT) od:
                          363.92 €
                          Standardowa data wysyłki:
                          5 dni robocze
                          Konfiguruj
                        • Slit Tip GDG Type

                            KYOCERA

                            Slit Tip GDG Type

                            When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
                            Czytaj dalej
                            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                            ----No-hand--
                            Cena (bez VAT) od:
                            23.50 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • CoroCut 1 / 2 Shank Tool Bit For Shallow Grooving & Face Grooving R / LF123

                              SANDVIK

                              CoroCut 1 / 2 Shank Tool Bit For Shallow Grooving & Face Grooving R / LF123

                              [Features]A high clamp rigidity type shank holder for parting and grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For parting and grooving.
                              Czytaj dalej
                              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                              Outer Diameter Grooving3 ~ 6-4.5 ~ 8Right-hand / Left-hand2 Corner16 ~ 25
                              Cena (bez VAT) od:
                              191.53 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • SANDVIK BMT Turret Interface to Blade Adaptor

                                SANDVIK

                                SANDVIK BMT Turret Interface to Blade Adaptor

                                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                ----Right-hand / Left-hand--
                                Cena (bez VAT) od:
                                1,958.46 €
                                Standardowa data wysyłki:
                                5 dni robocze
                                Konfiguruj
                              • SANDVIK CoroCut QD Cutting Unit for Parting and Grooving

                                  SANDVIK

                                  SANDVIK CoroCut QD Cutting Unit for Parting and Grooving

                                  ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                  ---22 ~ 40Right-hand / Left-hand--
                                  Cena (bez VAT) od:
                                  730.77 €
                                  Standardowa data wysyłki:
                                  5 dni robocze
                                  Konfiguruj
                                • SANDVIK Hydraulic Clamping Unit

                                    SANDVIK

                                    SANDVIK Hydraulic Clamping Unit

                                    ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                    ----No-hand--
                                    Cena (bez VAT) od:
                                    3,798.54 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • SANDVIK Driven Tool Holder for BMT-P Turrets

                                      SANDVIK

                                      SANDVIK Driven Tool Holder for BMT-P Turrets

                                      ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                      ----No-hand--
                                      Cena (bez VAT) od:
                                      4,419.69 €
                                      Standardowa data wysyłki:
                                      5 dni robocze
                                      Konfiguruj
                                    • Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

                                        KYOCERA

                                        Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

                                        If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.
                                        Czytaj dalej
                                        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                        ----Right-hand--
                                        Cena (bez VAT) od:
                                        136.56 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Punching Blade KTKB-S Type

                                          KYOCERA

                                          Punching Blade KTKB-S Type

                                          P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
                                          Czytaj dalej
                                          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                          -------
                                          Cena (bez VAT) od:
                                          122.44 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • CoroCut 1 / 2 Plunging Blade

                                            SANDVIK

                                            CoroCut 1 / 2 Plunging Blade

                                            Unique shape exhibits high performance
                                            Czytaj dalej
                                            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                            Outer Diameter Grooving / Cutting off1.5 ~ 6-15 ~ 55No-hand2 Corner25.9 ~ 31.9
                                            Cena (bez VAT) od:
                                            171.00 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • CoroCut, Q Cut, Blade / Adapter

                                              SANDVIK

                                              CoroCut, Q Cut, Blade / Adapter

                                              Unique shape exhibits high performance
                                              Czytaj dalej
                                              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                              Outer Diameter Grooving / Cutting off2 ~ 15-20 ~ 120Right-hand / Left-hand1 Corner / 2 Corner25.9 ~ 101.6
                                              Cena (bez VAT) od:
                                              234.63 €
                                              Standardowa data wysyłki:
                                              6 dni robocze
                                              Konfiguruj
                                            • CoroCut 1 / 2 Boring Tool Bit R / LAG 123 Cylindrical Shank

                                                SANDVIK

                                                CoroCut 1 / 2 Boring Tool Bit R / LAG 123 Cylindrical Shank

                                                [Features]A high clamp rigidity type boring tool bit for inner-diameter grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For inner-diameter grooving.
                                                Czytaj dalej
                                                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                Inner Diameter Grooving / Profiling1.5 ~ 5-4.5 ~ 8Right-hand / Left-hand2 Corner-
                                                Cena (bez VAT) od:
                                                284.68 €
                                                Standardowa data wysyłki:
                                                8 dni robocze
                                                Konfiguruj
                                              • CoroCut 1 / 2 Shank Tool Bit For Face Grooving

                                                  SANDVIK

                                                  CoroCut 1 / 2 Shank Tool Bit For Face Grooving

                                                  [Features]A high clamp rigidity type shank holder for face grooving. Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)For face grooving.
                                                  Czytaj dalej
                                                  ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                  Edge surface grooving / Horizontal feeding3 ~ 8-12 ~ 28Right-hand / Left-hand2 Corner25
                                                  Cena (bez VAT) od:
                                                  256.74 €
                                                  Standardowa data wysyłki:
                                                  6 dni robocze
                                                  Konfiguruj
                                                • T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R / L

                                                    SANDVIK

                                                    T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R / L

                                                    ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                    Inner Diameter Grooving / Profiling3 ~ 8-8 ~ 13Right-hand / Left-hand1 Corner-
                                                    Cena (bez VAT) od:
                                                    246.52 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Sandvik CoroCut 1 / 2 Plunging / Grooving Boring Bit

                                                      SANDVIK

                                                      Sandvik CoroCut 1 / 2 Plunging / Grooving Boring Bit

                                                      [Features]· A boring bit with high clamp rigidity for inner diameter grooving.· Unique rail locking seat and V-type seat securely receive lateral cutting force, delivering highly stable machining. (Patent Acquired)[Applications]· For inner diameter grooving.
                                                      Czytaj dalej
                                                      ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                      Inner Diameter Grooving------
                                                      Cena (bez VAT) od:
                                                      500.50 €
                                                      Standardowa data wysyłki:
                                                      6 dni robocze
                                                      Konfiguruj
                                                    • SANDVIK CoroCut 1-2 Head for Grooving

                                                        SANDVIK

                                                        SANDVIK CoroCut 1-2 Head for Grooving

                                                        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                        ----Right-hand / Left-hand--
                                                        Cena (bez VAT) od:
                                                        194.38 €
                                                        Standardowa data wysyłki:
                                                        5 dni robocze
                                                        Konfiguruj
                                                      • SANDVIK Driven Tool Holder for Mazak Machines

                                                          SANDVIK

                                                          SANDVIK Driven Tool Holder for Mazak Machines

                                                          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                          ----No-hand--
                                                          Cena (bez VAT) od:
                                                          4,641.85 €
                                                          Standardowa data wysyłki:
                                                          5 dni robocze
                                                          Konfiguruj
                                                        • SANDVIK T-Max Q-Cut Blade for Parting

                                                            SANDVIK

                                                            SANDVIK T-Max Q-Cut Blade for Parting

                                                            [Specifications]・Type: Blade insert, Cutting blade・External or internal machining: External machining・Cutting Direction: No-hand・Bracket Clamping technology: Spring tension system・eClass-5.1: 21011812
                                                            Czytaj dalej
                                                            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                            ----No-hand-17.48 ~ 79.5
                                                            Cena (bez VAT) od:
                                                            166.89 €
                                                            Standardowa data wysyłki:
                                                            5 dni robocze
                                                            Konfiguruj
                                                          • SANDVIK Driven Tool Holder for Gildemeister Machines

                                                              SANDVIK

                                                              SANDVIK Driven Tool Holder for Gildemeister Machines

                                                              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                              ----No-hand--
                                                              Cena (bez VAT) od:
                                                              7,220.00 €
                                                              Standardowa data wysyłki:
                                                              5 dni robocze
                                                              Konfiguruj
                                                            • SANDVIK Manual Clamping Unit for Okuma Machines

                                                                SANDVIK

                                                                SANDVIK Manual Clamping Unit for Okuma Machines

                                                                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                ----Right-hand / Left-hand--
                                                                Cena (bez VAT) od:
                                                                2,109.00 €
                                                                Standardowa data wysyłki:
                                                                5 dni robocze
                                                                Konfiguruj
                                                              • SANDVIK T-Max Q-Cut Head for Grooving

                                                                  SANDVIK

                                                                  SANDVIK T-Max Q-Cut Head for Grooving

                                                                  ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                  ----Right-hand / Left-hand--
                                                                  Cena (bez VAT) od:
                                                                  178.31 €
                                                                  Standardowa data wysyłki:
                                                                  5 dni robocze
                                                                  Konfiguruj
                                                                • SANDVIK Coromant Capto to ER Collet Chuck

                                                                    SANDVIK

                                                                    SANDVIK Coromant Capto to ER Collet Chuck

                                                                    ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                    ----No-hand--
                                                                    Cena (bez VAT) od:
                                                                    491.08 €
                                                                    Standardowa data wysyłki:
                                                                    5 dni robocze
                                                                    Konfiguruj
                                                                  • Outer Diameter Shallow Groove Holder KGBA Type

                                                                      KYOCERA

                                                                      Outer Diameter Shallow Groove Holder KGBA Type

                                                                      [Features] This is a lever lock type holder that can be used for shallow recesses on outer diameters.
                                                                      Czytaj dalej
                                                                      ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                      ----Right-hand / Left-hand--
                                                                      Cena (bez VAT) od:
                                                                      113.80 €
                                                                      Standardowa data wysyłki:
                                                                      6 dni robocze
                                                                      Konfiguruj
                                                                    • Outer Diameter Shallow Groove Holder KGBAS Type

                                                                        KYOCERA

                                                                        Outer Diameter Shallow Groove Holder KGBAS Type

                                                                        One holder with lever lock for flat punctures on outer diameters.[Shaft material]Steel.
                                                                        Czytaj dalej
                                                                        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                        ----Left-hand--
                                                                        Cena (bez VAT) od:
                                                                        126.58 €
                                                                        Standardowa data wysyłki:
                                                                        6 dni robocze
                                                                        Konfiguruj
                                                                      • Lathe Turning (Cutter) Bit GDG Model

                                                                          KYOCERA

                                                                          Lathe Turning (Cutter) Bit GDG Model

                                                                          Conventional insert mounting to new holders is not recommended.
                                                                          Czytaj dalej
                                                                          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                          ----No-hand--
                                                                          Cena (bez VAT) od:
                                                                          44.93 €
                                                                          Standardowa data wysyłki:
                                                                          6 dni robocze
                                                                          Konfiguruj
                                                                        • Lathe Turning (Cutter) Bit GDM Model

                                                                            KYOCERA

                                                                            Lathe Turning (Cutter) Bit GDM Model

                                                                            Conventional insert mounting to new holders is not recommended.
                                                                            Czytaj dalej
                                                                            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                            ----No-hand--
                                                                            Cena (bez VAT) od:
                                                                            16.12 €
                                                                            Standardowa data wysyłki:
                                                                            6 dni robocze
                                                                            Konfiguruj
                                                                          • Lathe Turning (Cutter) Bit GDMS Model

                                                                              KYOCERA

                                                                              Lathe Turning (Cutter) Bit GDMS Model

                                                                              Conventional insert mounting to new holders is not recommended.
                                                                              Czytaj dalej
                                                                              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                              ----No-hand--
                                                                              Cena (bez VAT) od:
                                                                              15.92 €
                                                                              Standardowa data wysyłki:
                                                                              6 dni robocze
                                                                              Konfiguruj
                                                                            • Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

                                                                                KYOCERA

                                                                                Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

                                                                                Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
                                                                                Czytaj dalej
                                                                                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                ----No-hand--
                                                                                Cena (bez VAT) od:
                                                                                26.64 €
                                                                                Standardowa data wysyłki:
                                                                                6 dni robocze
                                                                                Konfiguruj
                                                                              • Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

                                                                                  KYOCERA

                                                                                  Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

                                                                                  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
                                                                                  Czytaj dalej
                                                                                  ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                  ----No-hand--
                                                                                  Cena (bez VAT) od:
                                                                                  22.19 €
                                                                                  Standardowa data wysyłki:
                                                                                  6 dni robocze
                                                                                  Konfiguruj
                                                                                • Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

                                                                                    KYOCERA

                                                                                    Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

                                                                                    Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.
                                                                                    Czytaj dalej
                                                                                    ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                    ----Right-hand--
                                                                                    Cena (bez VAT) od:
                                                                                    44.43 €
                                                                                    Standardowa data wysyłki:
                                                                                    6 dni robocze
                                                                                    Konfiguruj
                                                                                  • Lathe Turning / Cutting (Multi-Function) Bit GMM Model

                                                                                      KYOCERA

                                                                                      Lathe Turning / Cutting (Multi-Function) Bit GMM Model

                                                                                      Machinable groove depth is limited depending on workpiece diameter.
                                                                                      Czytaj dalej
                                                                                      ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                      ----Right-hand / No-hand--
                                                                                      Cena (bez VAT) od:
                                                                                      19.58 €
                                                                                      Standardowa data wysyłki:
                                                                                      6 dni robocze
                                                                                      Konfiguruj
                                                                                    • Multi-Functional / Grooving Holder KGM Type (for Automatic Board)

                                                                                        KYOCERA

                                                                                        Multi-Functional / Grooving Holder KGM Type (for Automatic Board)

                                                                                        4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
                                                                                        Czytaj dalej
                                                                                        ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                        ----Right-hand--
                                                                                        Cena (bez VAT) od:
                                                                                        116.19 €
                                                                                        Standardowa data wysyłki:
                                                                                        6 dni robocze
                                                                                        Konfiguruj
                                                                                      • Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

                                                                                          KYOCERA

                                                                                          Multi-Functional / Shallow Grooving Holder (for Outer Diameter Grooving and End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

                                                                                          A holder for the multifunctional tool "TAKINOL" series.For grooving outside diameters with undercut.
                                                                                          Czytaj dalej
                                                                                          ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                          ----Right-hand--
                                                                                          Cena (bez VAT) od:
                                                                                          152.63 €
                                                                                          Standardowa data wysyłki:
                                                                                          6 dni robocze
                                                                                          Konfiguruj
                                                                                        • Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type

                                                                                            KYOCERA

                                                                                            Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] KGH Type

                                                                                            [Features] It can be used for shallow grooving on the outer diameter and for GH, GHU and GA inserts.
                                                                                            Czytaj dalej
                                                                                            ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                            ----Right-hand--
                                                                                            Cena (bez VAT) od:
                                                                                            140.80 €
                                                                                            Standardowa data wysyłki:
                                                                                            6 dni robocze
                                                                                            Konfiguruj
                                                                                          • Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip

                                                                                              KYOCERA

                                                                                              Outer Diameter Deep Groove Holder [for GH / GHU / GA Chip] Compatible Chip

                                                                                              [Features] It uses carbide and cermet materials, and some are CVD and PVD coated.
                                                                                              Czytaj dalej
                                                                                              ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                              ----No-hand--
                                                                                              Cena (bez VAT) od:
                                                                                              33.50 €
                                                                                              Standardowa data wysyłki:
                                                                                              6 dni robocze
                                                                                              Konfiguruj
                                                                                            • Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

                                                                                                KYOCERA

                                                                                                Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

                                                                                                T dimension: Shows the machinable groove depth.
                                                                                                Czytaj dalej
                                                                                                ApplicationGroove Width(mm)Maximum Machining Diameter(mm)Maximum Groove Depth(mm)Cutting DirectionNumber of corners for tip useShank height(mm)
                                                                                                ----Right-hand--
                                                                                                Cena (bez VAT) od:
                                                                                                42.50 €
                                                                                                Standardowa data wysyłki:
                                                                                                6 dni robocze
                                                                                                Konfiguruj