Holding Tools for I.D. Tuning

• 

  SANDVIK

  SANDVIK CoroTurn 111 Boring Bar for Back Boring

  [Specifications]・Type: Boring bar・Minimum Machining Diameter:21.59mm・Cutting Direction: Right-hand・Overall Length L1: 203.2mm・Clearance angle: 11º ・eClass-5.1: 21010903[Features]・Positive insert shape・Low cutting forces・Excellent edge strength・Screw clamping ensures stability and unobstructed chip flow・Tools with high pressure coolant・Insert geometries and grades for all materials

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	21.59	-	Right-hand	-	203.2	-	15.88	-

  Cena (bez VAT) od:

  194.38 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  Coromant Capto Cutting Head For Inner-Diameter Turning C3-SDUCR / L-X

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	22 ～ 32	Internal Diameter / Inner diameter profiling / Pull	Right-hand / Left-hand	Screw-on	-	7°	-	-

  Cena (bez VAT) od:

  483.78 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroThread 266 Boring Bar for Thread Turning

  [Specifications]・Type: Boring bar・Cutting Direction: Right-hand, Left-hand・Bracket: Clamping technology: Screw clamping system・External or internal machining: Internal machining・eClass-5.1: 21010903[Features]・Highly rigid external and internal thread turning・Optimize your tool path・iLock interface・Precision coolant solution

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	20 ～ 63	-	Right-hand / Left-hand	-	125 ～ 406.4	-	15.88 ～ 50.8	-

  Cena (bez VAT) od:

  247.00 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Insert Holder Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Compatible Tip: TP08, TC11・Lubrication Hole Y/N: Available[Features]・The EWN single cutter boring tool program for fine boring covers a range of Ø 20-203 mm with only 7 fine boring heads・Due to the optimized balance over the whole adjustment range, cutting speeds up to 1200 m/min are permitted

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	20 ～ 100	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  684.14 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTurn 111 Boring Bar for Turning

  [Specifications]・Type: Boring bar・Cutting Direction: Right-hand, Left-hand・Coolant: Yes・eClass-5.1: 21010903[Features]・All cylindrical CoroTurn 111 bars are designed for the EasyFix clamping system

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	6.604 ～ 30.5054	-	Right-hand / Left-hand	-	80 ～ 304.8	-	4.78 ～ 25.4	-

  Cena (bez VAT) od:

  194.38 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  BIG KAISER

  Insert Holder For EWN Boring Head Replacement

  [Features]Combining the head and insert holder makes it possible to secure a cutting chip pocket. Designed for improved cutting chip discharge. For EWN head

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	-	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  65.54 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  DuoBore Twin-Edge Boring Tool 391.68A

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape) / T (Triangle)	25 ～ 123	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  350.05 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Steel Blank with Coromant Capto Coupling

  [Specifications]・Type: Blank, Molding blank・Coolant: No・Cutting Direction: Neutral・eClass-5.1: 21021105, 21029112

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	60 ～ 200	-	32 ～ 160	-

  Cena (bez VAT) od:

  336.15 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroBore 826 Fine Boring Head

  [Specifications]・Type: Fine boring head・Minimum Machining Diameter: 150mm・Overall Length L1: 24mm・Shank diameter: 34mm・eClass-5.1: 21021105[Features]A34-R826C-E024HP:・The CoroBore XL system for large-diameter rough boring gives a rigid and reliable performance in larger bores and is designed to generate the required hole quality and diameter. The bridges and holders enable rough boring to be completed with high productivityA34-R826C-E 017:・The CoroBore XL system is a group of large-diameter boring tools. The wide application range covers rough and fine boring, interpolation turning as well as face grooving and the unique SpiroGrooving method

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	150	-	-	-	24	-	34	-

  Cena (bez VAT) od:

  1,645.69 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  BIG KAISER

  EWB Boring Head (High-Speed Finishing / Automatic Balance Compensation Mechanism Built-In)

  [Features]· With excellent dynamic balance, it achieves high-speed processing and stable precision.· Automatic balance compensation.· Accurate φ0.01 mm unit scale ultra-precision head.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	32 ～ 85	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  1,145.00 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head, CoroTurn 107 Screw Clamp, Diamond Shaped 55°

  [Features]An interchangeable-head-type cutting head for inner-diameter turning. The low cutting resistance ensures stable machining operations. For inner-diameter turning (bore cutting) operations.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	20 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	-	-	16 ～ 40	-

  Cena (bez VAT) od:

  366.84 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroBore 825 Fine Boring Head

  [Specifications]・Type: Fine boring head・Processing type: Finishing-bore tolerance IT6・Minimum Machining Diameter: 150mm・eClass-5.1: 21021105

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	150	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  1,645.69 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTurn 107 Cutting Unit for Back Boring

  [Specifications]・Type: Boring bar・Minimum Machining Diameter: 22, 27, 32mm・Cutting Direction: Right-hand, Left-hand・Coolant: Yes・eClass-5.1: 21010903[Features]・Maximize quality with fixed insert indexes・Unobstructed chip flow・Excellent chip control

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	22 ～ 32	-	Right-hand / Left-hand	-	-	-	-	-

  Cena (bez VAT) od:

  488.15 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroBore BR20 Twin-Edge Rough Boring Tool

  [Specifications]・Type: Double-edged boring tool・Cutting Direction: Right-hand・Cooling lubricant: Yes・eClass-5.1: 21021105[Features]・Twin-edge multi-purpose rough boring・The system consists of adapters with matching slides, shims and covers, making it possible to adapt the tool to various materials and conditions

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	28 ～ 115	-	Right-hand	-	-	-	-	-

  Cena (bez VAT) od:

  1,924.85 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroBore 825 XL Fine Boring Tool

  [Specifications]・Cutting Direction: Neutral・Processing type: Finishing - bore tolerance IT6・Cooling lubricant: Yes - through center・eClass-5.1: 21021105[Features]・CoroBore XL is the first choice for large-diameter fine boring. The tools can be adjusted radially in order to cover a certain diameter range with one tool. The tools allow precision adjustment in microns in order to achieve close hole tolerances・CoroTurn 107 and CoroTurn 111 inserts with dedicated grades and geometries for all materials・Excellent surface finish with wiper inserts・Tool holders optimized for large-diameter boring・Available with damped Silent Tools adapters for vibration-free boring in diameters 148–315 mm (5.827–12.402 inch), even at long overhangs・Also available as lightweight tools: CoroBore lightweight boring tools reduce tool weight and tool change moment, enabling easier handling and larger diameters

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	148 ～ 1018	-	IKOU	-	90 ～ 218	-	33 ～ 40	-

  Cena (bez VAT) od:

  3,851.15 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Coromant Capto to CoroBore 825 Tool Body

  [Specifications]・Type: Holder・Cutting Direction: Neutral・Processing type: Finishing - bore tolerance IT6・eClass-5.1: 21021105

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	19 ～ 136	-	IKOU	-	48 ～ 131	-	-	-

  Cena (bez VAT) od:

  1,259.85 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  BIG KAISER

  EWN Boring Head Set (For Finishing / Round Bit Type)

  [Specifications]・Applicable Tip Shape: T (Triangle)・Application: Internal Diameter・Minimum Machining Diameter: 1・L(mm): 28.5, 36, 45・Lubrication Hole Y/N: Available[Features]・Fine boring head in integral, modular, and screw-on execution for the precise machining of bores

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	1	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  440.00 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  SANDVIK

  T-Max P, Boring Tool Bit, Negative Inserts, Diamond 80° Compatible, A-PCLN

  First recommendation for general turning for medium to large partsInserts with crushers and materials for all machining areas.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	20 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	0°	16 ～ 50	64 ～ 200

  Cena (bez VAT) od:

  354.09 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  T-Max U Fine Boring Unit

  Unique shape exhibits high performance

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	Right-hand / Left-hand	-	24.1 ～ 62.7	-	16 ～ 32	-

  Cena (bez VAT) od:

  687.79 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  SANDVIK

  CoroTurn XS Insert Bar for Turning CXS-..T098

  [Features]CoroTurn XS, Insert BarCoating CarbideBoring Bar for Small Diameter MachiningFor lathe turning

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	0.3 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	27.25 ～ 72.25	-	4 ～ 7	-

  Cena (bez VAT) od:

  47.96 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn XS Insert Bar For Face Grooving CXS-..F

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor face groovingGroove width: 1.0 mm

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	6.2	Internal Diameter	Right-hand / Left-hand	-	37.3	-	6	-

  Cena (bez VAT) od:

  73.73 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn HP SL Cutting Head PCLN

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	34 ～ 56	Internal Diameter	Right-hand / Left-hand	Lever lock	28 ～ 42	-	25 ～ 40	-

  Cena (bez VAT) od:

  523.29 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  DuoBore Cartridge Twin-Edge Boring Tool 391.68A

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	148	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  331.95 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Solid-Carbide Boring Tool Bit, CoroTurn 111, Screw Clamp, E...-SCLPR / L

  CoroTurn 111 carbide boring tool bit for inner diameter machining with long runout and unstable machining conditions

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	10 ～ 16	Internal Diameter	Right-hand / Left-hand	Screw-on	125 ～ 180	11°	8 ～ 12	48 ～ 72

  Cena (bez VAT) od:

  362.20 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  THE CUT

  Bits Holder Adjuster (with Core Height Adjustment Function)

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  324.48 €～

  Standardowa data wysyłki:

  9 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Coromant Capto Reduction Adaptor

  [Specifications]・Type: Reducing adapter, Reducing element・Cutting Direction: Neutral・Coolant: Yes-radial KSS, Yes-through center・eClass-5.1: 21021105[Features]・Three systems in one・High torque transmission・High bending strength・Quick change and automated tool change・Advanced nozzle technology for process security even at low pressures・Through-tool delivery of high-pressure coolant, from machine to cutting edge・Balanced and concentric・Self-centering

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	90 ～ 110	-	-	-

  Cena (bez VAT) od:

  473.54 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTurn 107 Boring Bar for Back Boring

  [Specifications]・Type: Boring bar・Cutting Direction: Right-hand, Left-handm・For back boring・eClass-5.1: 21010903

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	26.6954 ～ 40.1066	-	Right-hand / Left-hand	-	250 ～ 304.8	-	19.05 ～ 31.75	-

  Cena (bez VAT) od:

  247.69 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Coromant Capto to Damped Arbor Adaptor

  [Specifications]・Type: Dampened milling adapter・Cutting Direction: Neutral・Coolant: Yes・eClass-5.1: 21021105

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	130 ～ 400	-	16 ～ 40	-

  Cena (bez VAT) od:

  5,059.85 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Cylindrical Shank to CoroBore 825 Boring Adaptor

  [Specifications]・Type: Fine boring head・Minimum Machining Diameter: 250mm・Processing type: Finishing - bore tolerance IT6・eClass-5.1: 21021105[Features]・Precision adjustment

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	250	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  1,774.31 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Coromant Capto Extension Adaptor

  [Specifications]・Type: Extending element, Reducing element・Cutting Direction: Neutral・Coolant: Yes - through center・eClass-5.1: 21021105[Features]・High torque transmission・High bending strength・Quick change and automated tool change・Advanced nozzle technology for process security even at low pressures・Through-tool delivery of high-pressure coolant, from machine to cutting edge・Balanced and concentric・Self-centering

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	IKOU	-	-	-	-	-

  Cena (bez VAT) od:

  469.15 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK Cylindrical Shank to CoroTurn SL Damped Adaptor

  [Specifications]・Type: Boring bar・Cutting Direction: Neutral・eClass-5.1: 21021105[Features]・CoroTurn SL cutting heads feature precision coolant nozzles for improved chip control and process security・Quick change cutting heads as an option – easy-to-adjust cutting head for more flexible production

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	19.9898 ～ 80.01	-	IKOU	-	199.898 ～ 849.12	-	15.88 | 16 ～ 60 | 63.5	-

  Cena (bez VAT) od:

  1,853.23 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroBore 825 Fine Boring Tool

  [Specifications]・Type: Complete boring tool・Cutting Direction: Neutral・Processing type: Finishing - bore tolerance IT6・Cooling lubricant: Yes - through center・eClass-5.1: 21010901, 21021105[Features]・Achieve the required overhang even at small diameters with the EH modular system・Reliable system with rigid interfaces between the head and cartridge・Cartridge designed for highest stability・Large assortment of CoroTurn 107 inserts

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	19 ～ 136	-	IKOU	-	25 ～ 200	-	18 ～ 25	-

  Cena (bez VAT) od:

  1,224.77 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  MANYO TOOLS

  TBS Throw-Away Square Bit

  [Features]· Use inserts from cutting tool manufacturers

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle) / S (Rectangular)	-	Internal Diameter	-	Screw-on	80 ～ 150	-	-	-

  Cena (bez VAT) od:

  123.02 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  KYOCERA

  Boring Bar Sleeve

  [Features] Machining applications: Inner diameter, through hole; compatible application: non-ISO standard; clamping method: non-ISO standard

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	-	-	-	70	-	-	-

  Cena (bez VAT) od:

  256.71 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CORO-TURN SL, 570-Type Cutting Head

  CoroTurnSL is a modular system of adapters and cutting heads that enables the construction of customised tools for a variety of turning operations with a minimum number of parts

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	50 ～ 80	Internal Diameter	Right-hand / Left-hand	-	32 ～ 40	-	40 ～ 60	-

  Cena (bez VAT) od:

  435.21 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroCut MB Solid-Carbide Boring Tool Bit MB-E

  [Features]Holder for inner-diameter turning (bore cutting) of small parts. The EasyFix sleeve makes center-height alignment easy and ensures excellent rigidity. Switch out the insert to use for grooving, threading, turning, profiling and face grooving operations. Minimum machining diameter: ø10 mm. For small inner-diameter turning (bore cutting) operations.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	-	Internal Diameter	-	-	-	-	-	-

  Cena (bez VAT) od:

  336.77 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn 107, Boring Tool Bit for Turning

  [Features]·Inner diameter boring tool bit with low cutting force·The internal coolant ensures longer insert lifespan and good cutting chip handling·High tool rigidity ensures stable machining operations even with workpieces with long protrusions[Applications]·For inner diameter turning operations

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped) / T (Triangle)	11 ～ 50	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Screw-on	125 ～ 300	5° / 7°	10 ～ 40	15–40 ～ 160

  Cena (bez VAT) od:

  190.36 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, A...-SVUBR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The high tool rigidity allows for stable machining operations, even with workpieces with long protruding sections. For inner-diameter turning (bore cutting) operations.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	27 ～ 33	Internal Diameter / Inner diameter profiling	Left-hand	Screw-on	250 ～ 300	5°	20 ～ 25	30~80 ～ 100

  Cena (bez VAT) od:

  233.13 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Boring Tool Bit T-Max P Lever Clamp S...-PDUNR / L

  [Features]An easy-handling inner-diameter boring tool bit with excellent repeatability. The use of internal coolant improves the handling of cutting chips and gives the inserts a longer service life. Supports inner-diameter turning (bore cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  D (55° Diamond-Shape)	32 ～ 63	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	Lever lock	300 ～ 400	0°	25 ～ 50	100 ～ 200

  Cena (bez VAT) od:

  413.19 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Boring Tool Bit, CoroTurn 107, Screw Clamp, E...-STFCR / L

  [Features]An inner-diameter boring tool bit with low cutting resistance. The internal coolant helps extend the life of the insert while also making it easier to handle cutting chips. The bit is made of solid-carbide materials, giving it a higher rigidity than that found with steel tool bits. The EasyFix sleeve allows for quick and accurate center height adjustment. For inner-diameter turning (bore cutting) operations.

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  T (Triangle)	8.5 ～ 20	Internal Diameter	Right-hand / Left-hand	Screw-on	100 ～ 200	7°	6 ～ 16	36 ～ 64

  Cena (bez VAT) od:

  305.64 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn XS Insert Bar For Grooving CXS-..G

  [Features]CoroTurn XS insert barSolid-carbide coatingBoring bit for small-diameter machiningFor groovingGroove width: 1.5 mm

  Czytaj dalej

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  -	4.2 ～ 7.2	Internal Diameter / Inner diameter profiling	Right-hand / Left-hand	-	27.3 ～ 57.8	-	4 ～ 7	-

  Cena (bez VAT) od:

  57.63 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	25 ～ 63	Internal Diameter	Right-hand / Left-hand	Lever lock	200 ～ 350	-	-	34 ～ 45

  Cena (bez VAT) od:

  529.18 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  T-Max P Inner-Diameter Boring Bit PWLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  W (Hexagonal Type)	32	Internal Diameter	Right-hand / Left-hand	Lever lock	300	-	-	42

  Cena (bez VAT) od:

  622.32 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  Cartridge T-Max P Lever Clamp For Negative Inserts PCLNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  C (80° Diamond-Shape)	55 ～ 100	Internal Diameter	Right-hand / Left-hand	Lever lock	63 ～ 100	-	-	-

  Cena (bez VAT) od:

  243.93 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn SL 570 Type Cutting Head, CoroTurn RC Double Clamp 570-DVUNR / L

  Applicable Tip Shape	Minimum Machining Diameter	Application	Cutting Direction	Clamp Shape	Overall Length L1	Clearance angle	Shank diameter	Protrusion length (L/D)
  V (35° Diamond-Shaped)	52	Internal Diameter	Right-hand / Left-hand	Cable clamp	36	-	40	-

  Cena (bez VAT) od:

  437.20 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj