Holding Tools for O.D. Tuning (Application: Outer Diameter Strona 3)

• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25 ～ 32	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	32	25 ～ 32

  Cena (bez VAT) od:

  241.61 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25 ～ 32	25 ～ 32

  Cena (bez VAT) od:

  241.61 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	No-hand	-	25	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR / L -2

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	-	25	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Clamp-on	No-hand	-	25 ～ 32	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25 ～ 32	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR / L -4

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Clamp-on	Right-hand / Left-hand	-	25 ～ 32	25

  Cena (bez VAT) od:

  241.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR / L-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  720.13 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR / L-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  519.87 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR / L-15HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  519.87 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  664.24 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  664.24 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DDNNN

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Cable clamp	No-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DSDNN

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	No-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DSRNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DVVNN

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter	Cable clamp	No-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  385.99 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Double Clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Outer Diameter	Double Clamp	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  345.98 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	Outer Diameter	Pin Lock	No-hand	Negative	-	-

  Cena (bez VAT) od:

  443.03 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Pin Lock	No-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Pin Lock	Right-hand / Left-hand	Negative	-	-

  Cena (bez VAT) od:

  347.56 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Outer Diameter	Cable clamp	Left-hand	Negative	16 ～ 25	16 ～ 25

  Cena (bez VAT) od:

  135.66 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Outer Diameter	Cable clamp	No-hand	Negative	32	25

  Cena (bez VAT) od:

  184.97 €

  Standardowa data wysyłki:

  12 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  R (Circular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	25 ～ 40	25 ～ 40

  Cena (bez VAT) od:

  158.23 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	20 ～ 50	20 ～ 50

  Cena (bez VAT) od:

  150.78 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Outer Diameter	Cable clamp	No-hand	Negative	16 ～ 40	16 ～ 40

  Cena (bez VAT) od:

  126.98 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Cable clamp	Left-hand	Negative	20 ～ 25	20 ～ 25

  Cena (bez VAT) od:

  150.78 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	16 ～ 32	16 ～ 32

  Cena (bez VAT) od:

  135.66 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L

  Excellent cutting chip control and process stability for one of the best part quality

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  T (Triangle)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	20	20

  Cena (bez VAT) od:

  150.12 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR / L

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	32 ～ 40	32 ～ 40

  Cena (bez VAT) od:

  234.52 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DVPNR / L

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter	Cable clamp	Right-hand / Left-hand	Negative	25 ～ 40	25 ～ 40

  Cena (bez VAT) od:

  174.18 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANDVIK

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Czytaj dalej

  Applicable Tip Shape	Application	Clamp Shape	Cutting Direction	Applicable Tip Clearance Angle Type	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Outer Diameter	Cable clamp	No-hand	Negative	32 ～ 40	25 ～ 40

  Cena (bez VAT) od:

  209.00 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj