Cutters / Indexable End Mills（work material：General Steel Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Phoenix Series Round Cutters Threaded Type
OSG
Screw Type Cutter For side surfaces, grooving, digging and form cutting.Configure nowStarting from∗ ： 331.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Round Cutters Straight Shank Type
OSG
The wide reversible plate pocket improves cutting performance, and the use of a body retraction mould that supports 3D machining enables highly efficient mould machining.Configure nowStarting from∗ ： 248.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Diameter Cutter Series Cyclone Cutter Straight Shank
OSG
High rake end mill with low cutting resistance. Large depth of cut and high feed rate achieve high efficiency machining.Configure nowStarting from∗ ： 792.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive Mill, Neo Shell Type
OSG
Shell type that uses 3-dimensional breaker inserts of good sharpness. For use with face mill arbor.Configure nowStarting from∗ ： 751.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Addition to multi-blade 20mm shank that uses small type of inserts good for application in small machines.Configure nowStarting from∗ ： 164.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
F3000 Series Positive, Neo Straight Shank
OSG
End mill type that uses 3-dimensional breaker inserts of good sharpness. Insert application is wide.Configure nowStarting from∗ ： 496.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters Straight Shank Type
OSG
By using this high-precision insert, excellent bottom surface roughness is achieved. Due to the bottom notch effect, chips are divided into 2 parts during ramp and spiral milling, which suppresses chip piercing and entanglement and enables smooth milling.Configure nowStarting from∗ ： 260.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Shoulder Cutting Cutters PSE Threaded Type
OSG
Threaded type for shoulder cutters. Special holders support different machining depths.Configure nowStarting from∗ ： 268.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Straight Shank Type
OSG
Indexable high feed radius cutter, threaded. Special holders support different machining depths.Configure nowStarting from∗ ： 231.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Threaded Type
OSG
PHC screw type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 404.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Feed Radius Cutters Bore Type
OSG
PHC bore type radius cutter. Machining Application: Flat Surfaces, Side Surfaces, Grooving, Digging and Form CuttingConfigure nowStarting from∗ ： 318.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series High Efficiency Radius Cutters with Shaft
OSG
A high feed radius cutter series with variable negative chamfer insert that prevents chipping and reduces cutting force.Configure nowStarting from∗ ： 291.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type
OSG
PHOENIX Series, wedge type
[Materials]General steel / Tempered steel / Stainless steel / Cast iron.Configure nowStarting from∗ ： 1,029.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 463.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 296.81 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Tiko Cutter
FUJIGEN
Ideal for use in low-rigidity machines such as tapping centers.
[Features]
· Small diameter shank lineup allows use for small machining.
· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)Configure nowStarting from∗ ： 472.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut (NS Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut (NT Type)
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)Configure nowStarting from∗ ： 889.20 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
NEW Nice Cut Arm【1-6 Pieces Per Package】
FUJIGEN
[Features]
2 types of beautiful cutting arms, 3-blade and 6-blade.
[Features]
It also supports high-speed cutting.Configure nowStarting from∗ ： 427.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shuririn
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.Configure nowStarting from∗ ： 196.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Corner Tool
FUJIGEN
[Features]
-Various corner radius finishes are possible by replacing inserts.
[Features]
For finishing flat surfaces and sides.Configure nowStarting from∗ ： 255.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dekasumi
FUJIGEN
This product can mill larger corner radii than "Sumicco".
It can mill corner radii from R5 to R10 by changing the inserts.Configure nowStarting from∗ ： 321.59 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
NEW Nice Cut Base
FUJIGEN
[Features]
· It has undergone innovative evolution. : 2 types, a 3-flute type and a 6-flute type, support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type).Configure nowStarting from∗ ： 384.27 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SHE Shell End Mill G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arborConfigure nowStarting from∗ ： 366.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Shell End Mill for MCS, MC G2
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arborConfigure nowStarting from∗ ： 476.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Side Chipper (Shank Type Mill) SIC Type - Medium Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 257.18 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Side Chipper (Bore Type Mill) SIC Type
DIJET
[Features]
· It is a tool with excellent abrasion resistance.Configure nowStarting from∗ ： 446.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super End Chipper SEC Type - Standard Type, Medium-Long Type
DIJET
Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.Configure nowStarting from∗ ： 541.62 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Super Die Mate HDM Type Bore Type Mill / Regular Type
DIJET
[Features]
· Supports materials from cast iron and general steel to stainless steel, titanium, and inconelConfigure nowStarting from∗ ： 470.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 133.46 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
E45X/E30/E45/E60 Chamfering Cutter
ISCAR
[Features]
-Low resistance 5-corner cutter with ISCAR's unique cutting edge.
[Features]
For chamfering and finishing.Configure nowStarting from∗ ： 201.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Shred Mill Helical End Mill
ISCAR
[Features]
Mill and spiral cutters.
[Features]
Suitable for shoulder milling and helical countersinking.Configure nowStarting from∗ ： 1,024.40 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Sumo Drill (5 mm Hilt) End Mill
ISCAR
[Features]
Counter sunk milling tool.
[Features]
For side machining.Configure nowStarting from∗ ： 261.02 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ball Plus (Multi-Purpose Tip Replacement Type Ball End Mill) HCM
ISCAR
ISCAR's original tip clamp system.Configure nowStarting from∗ ： 290.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutter (Shank Type) EPA TUNG-TRI
TUNGALOY
[Features]
· Uses 3-corner specification insert.
· "TUNG-TRI Series" high precision right-angle shoulder cutter.Configure nowStarting from∗ ： 335.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAC Flash End Mill EFVX
TUNGALOY
For multi-functional machining of steel, stainless steel, and cast ironConfigure nowStarting from∗ ： 191.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TAC Mill DOFEEDMINI EXN06
TUNGALOY
Next-generation ultra-high-feed cutter for high-efficiency roughing - Large inclination lowers resistance and suppresses chatter. - 2 types of insert can fully cover small to large diametersConfigure nowStarting from∗ ： 408.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TPA10 Type TUNG-TRI
TUNGALOY
Right-angle shoulder cutter that adopts a newly developed 3 corner specification insert. 3D Machining Also Possible: Right-Angled Shoulder Grinding, Grooving, Engraving, etc.Configure nowStarting from∗ ： 481.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tung-Tri TPA15 Screw Clamp-Type Cutter For High Accuracy Wall Surface Processing
TUNGALOY
[Features]
· Lead angle: 90°
· Uses 3 corner inserts
· Uniquely designed flank face of inserts prevents chattering during machiningConfigure nowStarting from∗ ： 412.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSN15R Type TECSLOT
TUNGALOY
Unrivaled high reliability side cutter of multi-flute specification, adopting a vertical insert with a tough cutting edge to realize high efficiency machiningConfigure nowStarting from∗ ： 1,202.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 478.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1,404.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 549.25 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 344.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 572.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Machining Application |
| blade diameter D(mm) |
| work material |
| Mounting Method |
| Finish category |
| Overall length (L)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Compatible Tip Material |
| Maximum Cutting Depth (Ad)(mm) |
| Underneck length (ℓ1)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | ASAHI TOOLS | ASAHI TOOLS | DIJET | DIJET | DIJET | DIJET | DIJET | ISCAR | ISCAR | ISCAR | ISCAR | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Wedge Stop Type | Super End Chipper SEC Type - Standard Type, Medium-Long Type | Ball Plus (Multi-Purpose Tip Replacement Type Ball End Mill) HCM | Tung-Tri TPA15 Screw Clamp-Type Cutter For High Accuracy Wall Surface Processing | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 331.10 € *Unit price with basic configuration | 248.60 € *Unit price with basic configuration | 792.83 € *Unit price with basic configuration | 751.17 € *Unit price with basic configuration | 164.58 € *Unit price with basic configuration | 496.42 € *Unit price with basic configuration | 260.30 € *Unit price with basic configuration | 268.40 € *Unit price with basic configuration | 231.83 € *Unit price with basic configuration | 404.50 € *Unit price with basic configuration | 318.50 € *Unit price with basic configuration | 291.42 € *Unit price with basic configuration | 1,029.17 € *Unit price with basic configuration | 463.70 € *Unit price with basic configuration | 296.81 € *Unit price with basic configuration | 472.18 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 889.20 € *Unit price with basic configuration | 427.96 € *Unit price with basic configuration | 196.18 € *Unit price with basic configuration | 255.43 € *Unit price with basic configuration | 321.59 € *Unit price with basic configuration | 384.27 € *Unit price with basic configuration | 366.34 € *Unit price with basic configuration | 476.44 € *Unit price with basic configuration | 257.18 € *Unit price with basic configuration | 446.80 € *Unit price with basic configuration | 541.62 € *Unit price with basic configuration | 470.22 € *Unit price with basic configuration | 133.46 € *Unit price with basic configuration | 201.80 € *Unit price with basic configuration | 1,024.40 € *Unit price with basic configuration | 261.02 € *Unit price with basic configuration | 290.24 € *Unit price with basic configuration | 335.44 € *Unit price with basic configuration | 191.63 € *Unit price with basic configuration | 408.53 € *Unit price with basic configuration | 481.21 € *Unit price with basic configuration | 412.32 € *Unit price with basic configuration | 1,202.11 € *Unit price with basic configuration | 478.69 € *Unit price with basic configuration | 1,404.35 € *Unit price with basic configuration | 549.25 € *Unit price with basic configuration | 344.54 € *Unit price with basic configuration | 572.65 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 9 Days | 9 Days | 7 Days | 7 Days | 8 Days | 9 Days | 8 Days | 9 Days | 7 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days |
| Machining Application | Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Chamfer | Side / Groove | Side / Groove | Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane | Plane | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Side / Groove / Inclined Cuts / Vertical | Plane / Groove / Vertical | Groove | Chamfer | Side / Inclined Cuts | Side | Groove / Inclined Cuts | Plane / Groove | Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Plunging (Z feed) / Inclined Cuts | Plane / Groove | Plane / Groove | Groove | Plane | Groove | Plane / Side / Groove | Plane | Plane |
| blade diameter D(mm) | 10 ～ 30 | 10 ～ 88 | 63 | 50 | 20 | 32 ～ 63 | 16 ～ 63 | 16 ～ 40 | 13.2 ～ 46.4 | 13.2 ～ 28.2 | 23.4 ～ 83.4 | 20 ～ 105 | 100 ～ 200 | 50 ～ 125 | 30 ～ 40 | 60 ～ 80 | 100 ～ 150 | 110 ～ 160 | - | 20 ～ 50 | 30 ～ 80 | 40 | 100 ～ 150 | 50 ～ 100 | 50 ～ 100 | 20 ～ 50 | 63 ～ 100 | 40 ～ 50 | 50 ～ 80 | 8 ～ 30 | 6 ～ 30 | 40 ～ 50 | 8 ～ 16 | 12 ～ 25 | - | - | - | - | - | - | - | 100 | 40 ～ 50 | 12 ～ 42 | 35 ～ 100 |
| work material | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel | General Steel |
| Mounting Method | Centering Plug | With handle / Arbor | With handle | Arbor | With handle | With handle | With handle | Centering Plug | With handle | Centering Plug | Arbor | With handle / Centering Plug | Arbor | Arbor | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | With handle | Arbor | Arbor | With handle | Arbor | With handle | Arbor | With handle | With handle | With handle | With handle | With handle | With handle | - | - | Arbor | Arbor | - | - | Arbor | With handle | Centering Plug | Centering Plug |
| Finish category | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | Finishing | - | - | - | - | - | - | - | Finishing | Finishing | Finishing | Finishing | - | - | - | - | - | - | - | Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing / Finishing | Rough and medium rough processing |
| Overall length (L)(mm) | 33 ～ 40 | 40 ～ 250 | 120 | 40 | 100 | 150 ～ 200 | 90 ～ 190 | 27 ～ 40 | 140 ～ 300 | 35 ～ 40 | 40 ～ 63 | 63 ～ 306 | 50 ～ 63 | 45 ～ 63 | 85 | 120 | 120 ～ 123.5 | 120 ～ 123.5 | - | 100 ～ 105 | 105 ～ 200 | 134.6 ～ 185 | 120 ～ 123.5 | - | 60 ～ 110 | 110 ～ 150 | - | 160 ～ 170 | - | 83 ～ 141 | 80 ～ 115 | 140 ～ 265 | 60 ～ 80 | 120 ～ 250 | 115 ～ 120 | 120 ～ 360 | 150 ～ 220 | - | - | - | - | - | 240 | - | - |
| Shank diameter (d)(mm) | - | 20 ～ 42 | 32 | - | 20 | 32 | 16 ～ 32 | - | 25 ～ 42 | - | - | MT5-M16 ～ CN50.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 ～ 32 | - | 32 ～ 42 | - | 12 ～ 32 | 12 ～ 32 | 32 ～ 50 | C08 ～ C16 | 12 ～ 32 | 25 ～ 32 | 16 ～ 42 | 32 | - | - | - | - | 22 | 32 | - | - |
| Number of flutes(sheet) | 2 ～ 4 | 2 ～ 10 | 5 | 5 | 3 | 3 ～ 4 | 2 ～ 6 | 2 ～ 6 | 2 ～ 5 | 2 ～ 4 | 3 ～ 8 | 2 ～ 6 | 14 ～ 25 | 4 ～ 8 | 3 | 3 | 3 ～ 6 | 3 ～ 6 | 3 ～ 6 | 2 ～ 5 | 2 ～ 4 | 2 | 3 ～ 6 | 6 ～ 10 | 6 ～ 10 | - | - | - | 3 ～ 4 | - | 1 ～ 3 | 9 ～ 27 | 1 ～ 5 | - | 2 ～ 4 | - | 2 ～ 3 | 4 ～ 6 | 4 ～ 7 | - | 3 ～ 7 | 6 | 2 ～ 3 | 2 ～ 6 | 3 ～ 12 |
| Compatible Tip Material | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | Carbide Coat / No Carbide Coat / Cermet | No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD) | - | - | - | - | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat | - | - | - | - | - | - | - | Carbide Coat | Carbide Coat | - | - |
| Maximum Cutting Depth (Ad)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ～ 9.7 | 53 ～ 160 | 5 | - | - | - | - | - | - | - | - | 15 | 6 ～ 10 | 0.7 ～ 5 | 4 ～ 10 |
| Underneck length (ℓ1)(mm) | - | 50 ～ 120 | 45 | - | 30 | 45 | 25 ～ 90 | - | 40 ～ 180 | - | - | 50 ～ 170 | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 ～ 40 | - | 60 ～ 70 | - | 18.5 ～ 34 | - | - | - | - | - | - | - | - | - | - | - | - | 63 | - | - |
Loading...
Filter by:
-
Machining Application
-
blade diameter D(mm)
- 2
- 4
- 4.29 - 12.70
- 4.52 - 9.53
- 4.60 - 13.00
- 5
- 5.00 - 10.00
- 5.00 - 12.00
- 5.69 - 12.70
- 6
- 7
- 7.00 - 12.00
- 7.42 - 12.70
- 7.49 - 15.88
- 7.60 - 16.00
- 7.87 - 15.88
- 8
- 8 mm
- 8.00 mm
- 8.00 - 15.00
- 8.00 - 16.00
- 8.60 - 20.00
- 8.86 - 15.88
- 9.00 - 16.00
- 9.04 - 19.05
- 9.525
- 9.7
- 10
- 10 mm
- 10.00 mm
- 10.00 - 20.00
- 10.59 - 19.05
- 11.05 - 19.05
- 11.3
- 11.60 - 20.00
- 11.7
- 12
- 12 mm
- 12.00 mm
- 12.00 / 16.20
- 12.00 - 20.00
- 12.00 / 20.10
- 12.00 / 22.90
- 12.00 / 23.40
- 12.00 - 24.00
- 12.7
- 13
- 13.2
- 13.21 / 17.42
- 13.21 / 21.29
- 13.21 / 24.61
- 13.21 / 27.20
- 13.4
- 13.50 - 25.00
- 13.7
- 14
- 14.00 - 25.40
- 15
- 15.00 - 25.00
- 15.4
- 15.7
- 15.875
- 15.88
- 16
- 16 mm
- 16.00 mm
- Cutter Diameter φ16
- 16.00 - 32.00
- 16.2
- 16.60 - 25.00
- 16.94 - 31.75
- 16.99 - 25.40
- 17
- 17.00 - 25.00
- 17.20 - 32.00
- 17.5
- 17.6
- 18
- 18 mm
- Cutter Diameter φ18
- 18.2
- 18.4
- 18.5
- 18.9
- 19
- 19.05
- 19.5
- 19.56 / 30.96
- 19.7
- 20
- 20
- 20 mm
- 20.00 mm
- Cutter Diameter φ20
- 20.00 - 32.00
- 20.2
- 20.5
- 20.50 / 31.90
- 20.50 - 32.00
- 20.50 / 36.90
- 20.9
- 21
- 21.20 - 36.00
- 21.5
- 22
- 22 mm
- Cutter Diameter φ22
- 22.00 - 32.00
- 22.5
- 23
- 23.2
- 23.29 - 38.10
- 23.4
- 23.5
- 23.8
- 24
- 24.00 - 32.00
- 24.5
- 25
- 25
- 25 mm
- 25.00 mm
- Cutter Diameter φ25
- 25.20 - 40.00
- 25.4
- 25.5
- 25.50 / 29.70
- 25.50 / 33.60
- 25.50 / 36.90
- 25.50 / 39.50
- 25.91 / 30.10
- 25.91 / 33.99
- 25.91 / 37.31
- 25.91 / 39.90
- 26
- 26.5
- 26.8
- 27
- 27.20 - 42.00
- 27.5
- 28
- 28 mm
- 28.2
- 28.5
- 29
- 29.40 - 44.00
- 29.5
- 30
- 30 mm
- 30/32
- 30.5
- 30.7
- 31
- 31.5
- 31.75
- 32
- 32
- 32 mm
- 32.00 mm
- Cutter Diameter φ32
- 32.5
- 33
- 33.4
- 34
- 35
- 35 mm
- 35.20 - 50.00
- 35.9
- 35.99 - 50.80
- 36
- 36.7
- 37.20 - 52.00
- 37.40 - 52.00
- 38
- 38.1
- 38.2
- 39
- 39.40 - 54.00
- 39.5
- 40
- 40
- 40.00 mm
- Cutter Diameter φ40
- 40.50 / 51.90
- 42
- 43
- 44
- 46.4
- 47
- 48
- 48.20 - 63.00
- 48.69 - 63.50
- 48.7
- 49.4
- 50
- 50
- 50 mm
- 50.00 mm
- Cutter Diameter φ50
- 50.50 / 61.90
- 50.8
- 51
- 51.2
- 51.20 - 66.00
- 51.30 - 66.00
- 52
- 52.2
- 54
- 54.08
- 55
- 58
- 60
- 61.39 - 76.20
- 61.7
- 62.5
- 62.992
- 63
- 63
- 63 mm
- 63.00 mm
- Cutter Diameter φ63
- 63.4
- 63.5
- 63.50 / 74.90
- 64
- 64.08
- 65
- 65.20 - 80.00
- 66
- 66.04
- 68
- 69.20 - 84.00
- 69.40 - 84.00
- 69.7
- 70
- 71
- 72
- 75
- 75.5
- 75.997
- 76
- 76.2
- 77.08
- 77.08
- 77.2
- 78.08
- 78.7
- 80
- 80
- 80 mm
- 80.00 mm
- Cutter Diameter φ80
- 80.01
- 82
- 83.4
- 84
- 85.20 - 100.00
- 86
- 86.7
- 86.79 - 101.60
- 88
- 89.4
- 90
- 92.5
- 94.08
- 94.08
- 98
- 98.7
- 98.8
- 100
- 100 mm
- 100.00 mm
- Cutter Diameter φ100
- 100.00 - 107.00
- 101.3
- 101.6
- 101.60 - 108.61
- 101.60 - 117.40
- 102
- 103
- 105
- 106.7
- 109
- 110
- 112.5
- 114.08
- 114.08
- 118.8
- 120
- 123.7
- 124.6
- 125
- 125 mm
- 125.00 mm
- Cutter Diameter φ125
- 125.00 - 132.00
- 127
- 127.00 - 134.01
- 127.00 - 142.80
- 128.4
- 130
- 131.4
- 131.7
- 136
- 137.5
- 138.8
- 139.08
- 139.08
- 140
- 150
- 152
- 152.4
- 152.40 - 159.41
- 152.40 - 168.20
- 159.6
- 160
- 160.00 mm
- 160.00 - 167.00
- 166.7
- 172.5
- 174.08
- 174.08
- 178.8
- 180
- 200
- 200.00 - 207.00
- 203
- 203.2
- 203.20 - 210.21
- 203.20 - 219.00
- 212.5
- 218.8
- 249.6
- 250
- 250.00 - 257.00
- 250.00 - 265.80
- 254
- 254.00 - 261.00
- 254.00 - 261.01
- 254.00 - 269.80
- 262.5
- 268.8
- 304.8
- 304.80 - 311.81
- 305
- 314.6
- 315
- 315.00 - 322.00
- 354.6
- 355
- 355.00 - 362.00
- 399.6
- 400
- 400.00 - 407.00
- 406
- 406.40 - 413.41
- 499.6
- 500
- 500.00 - 507.00
- 508
- 508.00 - 515.01
- Cutter Diameter φ563
-
work material
-
Mounting Method
-
Finish category
- Rough and medium rough processing
- Finishing
- Rough to Finish Processing
-
Overall length (L)(mm)
-
2.18～5.82
- 2.18
- 2.64
- 2.7
- 2.79
- 3.66
- 3.7
- 4.52
- 4.7
- 5.7
- 5.82
-
16～19.99
- 16
- 19.99
-
20～29.06
- 20
- 24.99
- 25
- 26
- 27
- 27.2
- 29.06
-
30～38
- 30
- 32
- 33
- 35
- 37
- 38
-
40～49
- 40
- 40$40.7
- 40.01
- 41
- 41.05
- 41.78
- 42.95
- 43
- 44.5
- 45
- 45.009
- 46
- 47.5
- 48
- 49
-
50～59.99
- 50
- 50$50.7
- 50.01
- 50.013
- 51
- 52
- 53.26
- 54
- 55
- 56
- 56.9
- 57
- 58
- 58.7
- 59.08
- 59.99
-
60～68
- 60
- 60.25
- 61.77
- 62
- 62.99
- 62.992
- 63
- 63$63.7
- 63.5
- 64
- 65
- 66
- 68
-
70～78
- 70
- 70.002
- 72
- 72.5
- 73
- 74
- 74.4
- 75
- 76
- 77
- 77.7
- 78
-
80～89.99
- 80
- 81
- 83
- 84
- 84.7
- 85
- 88
- 89.99
-
90～99
- 90
- 91
- 92
- 95
- 96
- 98
- 98.7
- 99
-
100～109
- 100
- 103
- 104
- 105
- 107
- 108
- 109
-
110～119.99
- 110
- 110.01
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 119.99
-
120～129.5
- 120
- 121
- 122
- 123
- 123.5
- 124
- 125
- 126
- 127
- 128
- 129.5
-
130～139
- 130
- 130/131.6
- 131
- 132
- 132.5
- 133
- 134
- 134.6
- 135
- 135.5
- 136
- 137
- 138
- 138.5
- 139
-
140～149
- 140
- 141
- 141.5
- 142
- 143
- 144
- 144.5
- 144.78
- 145
- 146
- 147
- 147.5
- 149
-
150～159.99
- 150
- 150.5
- 151
- 152
- 152.4
- 153
- 153.5
- 154
- 155
- 156
- 157
- 158
- 159.99
-
160～169.5
- 160
- 161
- 161.5
- 163
- 164.5
- 165
- 165.1
- 166
- 167
- 167.5
- 169
- 169.5
-
170～177
- 170
- 170.5
- 171
- 172
- 173
- 173.5
- 174.5
- 175
- 176
- 177
-
180～189.5
- 180
- 180/181.6
- 182
- 184.6
- 185
- 186
- 186.5
- 187
- 188
- 189.5
-
190～198
- 190
- 190.5
- 191
- 192
- 194
- 195
- 197
- 198
-
200～209
- 200
- 202
- 203
- 203.2
- 207
- 209
-
210～219
- 210
- 212
- 215
- 216
- 217
- 219
-
220～228.6
- 220
- 221
- 222
- 224
- 225
- 227
- 228.6
-
230～238
- 230
- 232
- 238
-
240～249.8
- 240
- 244
- 245
- 247
- 249.8
-
250～257
- 250
- 252
- 254
- 255
- 256
- 257
-
260～265
- 260
- 262
- 265
-
270～279.5
- 270
- 278
- 279.5
-
280～289.8
- 280
- 284
- 286
- 289.8
-
290
-
300～306
- 300
- 306
-
310～315
- 310
- 315
-
329.5
-
339.8
-
350
-
360
-
389.8
-
439.8
-
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Compatible Tip Material
-
Maximum Cutting Depth (Ad)(mm)
-
Underneck length (ℓ1)(mm)
Brand
-
- TUNGALOY (76)
- SANDVIK (45)
- OSG (16)
- FUJIGEN (10)
- DIJET (8)
- ISCAR (4)
- ASAHI TOOLS (2)
- MITSUBISHI MATERIALS (2)
- KYOCERA (1)
- PHOENIX CONTACT (0)
- ESCO (0)
- BIG KAISER (0)
- CARMEX (0)
- HITACHI TOOL (0)
CAD data type
-
- 2D
- 3D
Categories related to Cutters / Indexable End Mills
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.