HSS Ball End Mills

• 

  • Volume Discount

  EIKOSHA

  HPM Ball End Mill HPBE

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5R ～ 20R	2.5 ～ 65	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Powder high-speed steel	2	Non-Coated	70 ～ 230	6 ～ 32	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  87.57 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • AS
  • 2 Flutes
  • R (Regular)

  MISUMI

  AS Coated Powdered High-Speed Steel Ball End Mill, 2-Flute / Regular

  [Features] -Ball cutter with 2 flutes and regular length-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1.5 ～ 10	8 ～ 38	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powder high-speed steel	2	For High Hardness (Silicon Group)	56 ～ 141	6 ～ 20	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  38.34 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • R (Regular)

  MISUMI

  TiCN Coated High-Speed Steel Ball End Mill, 2-Flute / Regular

  [Features] -Uses a coating with excellent lubricity-Effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1.5 ～ 12.5	8 ～ 50	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	TiCN	56 ～ 166	6 ～ 25	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  29.31 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TiCN
  • 4 Flutes
  • R (Regular)

  MISUMI

  TiCN Coated High-Speed Steel Ball End Mill, 4-Flute / Regular

  [Features] -Uses a coating with excellent lubricity-Effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  4 ～ 12.5	20 ～ 50	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	4	TiCN	90 ～ 165	8 ～ 25	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  73.54 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • Non-Coated
  • 2 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Ball End Mill, 2-Flute / Regular / Non-Coated Model

  [Features] -Uncoated design for general use-Fine and coarse grinding, depending on intended use-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1.5 ～ 10	8 ～ 38	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	Non-Coated	56 ～ 141	6 ～ 20	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  21.78 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • Non-Coated
  • 4 Flutes
  • R (Regular)

  MISUMI

  High-Speed Steel Roughing Ball End Mill, 4-Flute / Regular / Non-Coated Model

  [Features] -Uncoated type for general use-Effective for rough machining of curved surfaces-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  4 ～ 12.5	20 ～ 50	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	4	Non-Coated	90 ～ 165	8 ～ 25	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  70.49 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  NACHI(FUJIKOSHI)

  AG Mill, Ball 2AGRE

  Performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5 ～ 12.5	2 ～ 50	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cobalt HSS	2	TiAlN	55 ～ 180	6 ～ 25	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  94.72 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  End Mill (2-Flute General-Purpose Ball-End Type), EBD

  Cobalt High-Speed Steel Ball Cutter.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminium/CopperCoating: Uncoated, Standard/Alteration Category: Manufacturer's Standard Product, Number of Flutes (pcs.): 2

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.4 ～ 25	2 ～ 75	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	Non-Coated	50 ～ 210	6 ～ 42	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  29.54 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  TIN Coated (2-Flute Ball-End Shape) EX-TIN-EBD

  It is TiN coated for excellent chip resistance and abrasion resistance, and uses cobalt high-speed steel for impact resistance.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1 ～ 15	5 ～ 55	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	TiN	50 ～ 180	6 ～ 25	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  43.66 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  V Coated XPM Slim Shank End Mill (2-Flute Ball End Type), V-SS-XPM-EBD

  Slim shank ball end mills; shank diameter is 1 mm smaller than blade diameter. Can freely adjust the extension and length.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  3 ～ 12.5	12 ～ 50	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Powder high-speed steel	2	TiCN	120 ～ 220	5 ～ 24	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  67.89 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  V Coated XPM End Mill (2-Flute Ball-End Type), V-XPM-EBD

  The layered structure, where the TiN layer is coated with the TiCN layer, provides even higher hardness than the TiN coating and is effective in increasing the speed and extending the life of HSS tools.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5 ～ 15	2.5 ～ 55	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Cobalt HSS / Powder high-speed steel	2	TiCN	60 ～ 200	6 ～ 25	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  57.18 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  XPM End Mill (2-Flute Ball-End Type), XPM-EBD

  It is made of powder metallurgy high speed steel which has excellent abrasion resistance and toughness and can be used for machining various steel materials such as general steel, stainless steel, cast iron and aluminium.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5 ～ 15	2.5 ～ 55	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Powder high-speed steel	2	Non-Coated	60 ～ 200	6 ～ 25	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  45.76 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Multi-Flute Ball End Type EBM

  It can be used for machining a variety of steel materials such as general steel, stainless steel, cast iron and aluminium, and as it uses cobalt high speed steel, it has high abrasion resistance and impact strength.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  3 ～ 25	15 ～ 75	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	4 ～ 6	Non-Coated	90 ～ 210	6 ～ 42	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  48.06 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  FUKUDA

  Ball End Mill, 2-Flute

  Rounded finishing. General Purpose

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5 ～ 40	5 ～ 120	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Cobalt HSS	2	Non-Coated	60 ～ 240	6 ～ 42	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  74.81 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  FUKUDA

  Ball End Mill, 4-Flute

  2-flute blade has high rigidity and is excellent at maintaining rounded finish dimensions.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  2 ～ 30	20 ～ 120	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Cobalt HSS	4	Non-Coated	70 ～ 240	6 ～ 32	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  85.33 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  FUKUDA

  Long Shank Ball End Mill 2 Blades

  A long-type ball end mill that supports a wide range of metal mold machining

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  3 ～ 20	30 ～ 100	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Cobalt HSS	2	Non-Coated	130 ～ 320	6 ～ 32	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  99.84 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  FUKUDA

  Long Shank Ball End Mill 4 Blades

  2-flute blade has high rigidity and is excellent at maintaining rounded finish dimensions. Long shank.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  15.5 ～ 25	80 ～ 125	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Cobalt HSS	4	Non-Coated	300 ～ 320	32 ～ 42	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  606.73 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  FUKUDA

  Taper Neck Ball End Mill

  With draft for deep drilling. Using powder HSS, it handles a wide range of material from general steels through high hardness materials and hard-to-cut materials.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1.5 ～ 20	8 ～ 65	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Powder high-speed steel	2 ～ 4	Non-Coated	160 ～ 400	10 ～ 42	Curved surface / Engraving / R Groove

  Cena (bez VAT) od:

  119.77 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  SANKO MFG

  FFB2T 2-Flute Blade Ball Short Blade

  A ball end mill with a short cutting edge.Materials: JIS-SKH (TS for hot work)57 (high cobalt high speed steel)Ball end mill R tolerance: -0.03 to 0Helix angle: 30°.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1.05 ～ 9.5	4 ～ 40	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Cobalt HSS	2	Non-Coated	55 ～ 160	6 ～ 20	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  53.78 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANKO MFG

  BE 2-Flute Ball Mill Regular Blade

  A ball nose end mill with a normal blade.Materials: JIS-SKH (TS for hot work)57 (high cobalt high speed steel)Outer diameter tolerance: -0.03 to 0Helix angleFor R1 to 6: 30°For R6.5 to 25: 25°Bladge shape: flat cutting edge.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  1	6	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Cobalt HSS	2	Non-Coated	55	6	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  59.54 €

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  SANKO MFG

  FFB4T 4-Flute Blade Ball Short Blade

  4-flute ball end mill. Capable of high-speed and high-efficiency machining.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  20	60	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Cobalt HSS	4	Non-Coated	220	32	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  474.96 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  SANKO MFG

  REB Roughing Ball

  4-flute ball end mill. The roughing shape makes it suitable for rough cutting.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  4 ～ 15	20 ～ 60	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Cobalt HSS	4	Non-Coated	100 ～ 180	8 ～ 25	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  137.64 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  End Mill (Roughing Long-Shank Ball-End Type), EX-LS-REBS

  It is made of powder metallurgy high speed steel with excellent abrasion resistance and toughness and can be used for roughing and semi-finishing of steel materials.

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  4 ～ 25	20 ～ 90	-	Powder high-speed steel	4 ～ 6	-	90 ～ 225	8 ～ 42	-

  Cena (bez VAT) od:

  81.11 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  EIKOSHA

  Taper Ball End Mill HPTBE

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  R0.5 ～ R8	4 ～ 65	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powder high-speed steel	2	Non-Coated	45 ～ 155	6 ～ 32	-

  Cena (bez VAT) od:

  97.61 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  EIKOSHA

  Ball End Mill BE

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5R ～ 40R	2.5 ～ 120	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	Non-Coated	55 ～ 260	6 ～ 42	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  67.02 €

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  EIKOSHA

  Long Shank Ball End Mill BELS

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  3R ～ 20R	12 ～ 65	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	Non-Coated	130 ～ 300	6 ～ 32	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  110.38 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  EIKOSHA

  Long Ball End Mill BEL

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.5R ～ 20R	6 ～ 130	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cobalt HSS	2	Non-Coated	60 ～ 250	6 ～ 32	Curved surface / Side / Engraving / R Groove

  Cena (bez VAT) od:

  95.25 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  TAIYO-TOOL

  Ball End Mill, BE (HSS-Co)

  [Cutting Edge Shape Type]· Square[Tool Grade]· High-speed steel[Coating]· Non-Coated[Flute No.] 2-Flute

  Czytaj dalej

  R Size(mm)	Blade length (ℓ)(mm)	work material	Tool Material Type	Number of flutes(sheet)	Coating	Overall Length (L)(mm)	Shank diameter (d)(mm)	Machining Application
  0.3 ～ 3	2 ～ 20	-	High-speed steel	2	Non-Coated	60 ～ 90	6	-

  Cena (bez VAT) od:

  121.68 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj