Square End Mills (HSS)（Page 3）

235

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (4-Flute Long Type), V-XPM-EML

OSG

V coating has been applied to high-speed steel powder XPM. Base Material Adopted Powdered High Speed Steel XPM 2-Flute Short Series

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS

OSG

Long shank form end mill with 4 blades for deep engraving. Set with a shank radius thinner than the blade bore.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS

OSG

TIN coating, helix angle 50°, short size end-mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (High-Helix Short Type), XPM-EHS

OSG

Sharp end mill with high helix using high speed powder steel XPM as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TIN Coated XPM End Mill (High Helix Long Type) TIN-XPM-EHL

OSG

TIN coating, helix angle 50°, long size end-mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM, High-Helix Long Type, V-XPM-EHL

OSG

Long flute series with good cutting ability and a high helix. Stable tool life obtained by V coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (High-Helix Long Type), XPM-EHL

OSG

Long flute series with good cutting ability and a high helix. Base material adopts powdered HSS XPM.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (Multi-Flute Short Type), XPM-EMS

OSG

4-flute short end mill with powder metal high-speed steel XPM as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

XPM End Mill (Multi-Flute Long Type), XPM-EML

OSG

Multi-flute end mill in long version made of powder metal high-speed steel XPM as basic material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

End Mill (2-Flute Short Type for Aluminum), AL-EDS

OSG

Short 2-flute cutter for aluminium alloys using cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.82 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

End Mill (2 Flutes, for Stainless Steel), SUS-EDS

OSG

2-flute end mills short for stainless steel with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

V Coated XPM End Mill (2 Flutes, for Counterboring), VP-ZDS

OSG

V-coated 2-flute end mill for countersinking using powder metallurgy high-speed steel CPM as the base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Flute Extra Long EXML

OSG

30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

3S End Mill, 2-Flute (Standard Blade)

FUKUDA

Wide range of blade lengths and an abundance of sizes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

3S End Mill, 2-Flute Long Blade

FUKUDA

Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

Select to compare

Configure now
Starting from^∗ ：	43.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Shank End Mill 2 Blades

FUKUDA

Long Shank for Deep Engraving

Select to compare

Configure now
Starting from^∗ ：	64.86 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Special Long Shank End Mill, 2-Flute

FUKUDA

The shank has been made especially long for deep engraving. Designed with a thin shank.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3S End Mill, 6-Flute (Standard Blade)

FUKUDA

Side cutting and groove re-polishing are easy

Select to compare

Configure now
Starting from^∗ ：	697.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

3S End Mill, 4-Flute Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

3S End Mill, 4-Flute Extra Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Long Shank End Mill 4 Blades

FUKUDA

Long shank / center-cut for deep engraving and blind holes

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.43 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Special Long Shank End Mill, 4-Flute

FUKUDA

The shank has been made especially long for deep engraving. Designed with a thin shank.

Select to compare

Configure now
Starting from^∗ ：	81.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill for Keyway (Positive Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Positive blade diameter tolerance. A straight shank.

Select to compare

Configure now
Starting from^∗ ：	44.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill for Keyway / BS Shank (Positive Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Positive blade diameter tolerance. BS shank.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill for Keyway (Negative Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Negative blade diameter tolerance. A straight shank.

Select to compare

Configure now
Starting from^∗ ：	44.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill for Keyway / BS Shank (Negative Tolerance)

FUKUDA

Endmill dedicated for key groove machining. Negative blade diameter tolerance. BS shank.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OL1)

OSG

V coating applied powder high speed XPM key groove processing end-mill

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EX-TIN-EKD (OLI)

OSG

TiN-coated 2-flute end mill with a cutting edge diameter tolerance of 0 to -0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OL1)

OSG

2-flute general purpose flute cutter with cutting edge diameter tolerance from 0 to -0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OL2)

OSG

2-flute general purpose end mills with a cutting edge diameter tolerance of -0.02 to -0.04.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OL3)

OSG

2-flute end mills for general purposes with a cutting edge diameter tolerance of -0.04 to -0.06.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

KHB2TS Hybrid Short 2-Flute Blade

SANKO MFG

A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.

[Features]
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

Select to compare

Configure now
Starting from^∗ ：	154.38 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

P-VS2T P Coated 2-Flute Short Blade

SANKO MFG

[Features]
· P coating provides excellent surface flatness and abrasion resistance.
· A 2-flute end mill for finish machining.

Select to compare

Configure now
Starting from^∗ ：	79.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SS2T S Coated Estech 2-Flute Short

SANKO MFG

2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

Select to compare

Configure now
Starting from^∗ ：	75.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SS2TM S Coated Estech 2-Flute Regular

SANKO MFG

[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of machining applications, due to the regular flute length.
· High grade powder metallurgy HSS with S-coating.
· Enables a wide range of machining applications, due to the regular flute length.

Select to compare

Configure now
Starting from^∗ ：	53.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

STEC2TL ESTECH 2-Flute Long Blade

SANKO MFG

[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of side machining and deep engraving, due to the long flute length.

Select to compare

Configure now
Starting from^∗ ：	86.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

VS2T 2-Flute Short

SANKO MFG

A 2-flute end mill for finishing.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Helix angle: 30°
Cutting tip shape: Sharp corner.

Select to compare

Configure now
Starting from^∗ ：	31.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

LVS2T 2-Flute Blade Long Blade

SANKO MFG

A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Select to compare

Configure now
Starting from^∗ ：	32.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

P-VS3T P Coated 3-Flute Short Blade

SANKO MFG

[Features]
· A 3-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance

Select to compare

Configure now
Starting from^∗ ：	43.71 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

P-VS4T P Coated 4-Flute Short Blade

SANKO MFG

[Features]
· A 4-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance.

Select to compare

Configure now
Starting from^∗ ：	80.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SS4TL S Coated Estech 4-Flute Long

SANKO MFG

[Features]
· 4-flute finishing endmill with TiCN coating.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.

Select to compare

Configure now
Starting from^∗ ：	84.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

VS4T 4-Flute Short

SANKO MFG

[Features]
· A 4-flute end mill for finish machining.
· The outer diameter tolerance is negative (φ2-50).

Select to compare

Configure now
Starting from^∗ ：	22.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

VSM4T 4-Flute Regular

SANKO MFG

A 4-flute end mill for finish machining. The outer diameter tolerance is positive.

Select to compare

Configure now
Starting from^∗ ：	33.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

LVS4T 4-Flute Blade Long Blade

SANKO MFG

A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.78 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	FUKUDA	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG
Product Series	V Coated XPM Slim Shank End Mill (4 Flutes, Short), V-SS-XPM-EMS	V Coated XPM End Mill (4-Flute Long Type), V-XPM-EML	XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS	TIN Coated XPM End Mill (High Helix Short Type) TIN-XPM-EHS	XPM End Mill (High-Helix Short Type), XPM-EHS	TIN Coated XPM End Mill (High Helix Long Type) TIN-XPM-EHL	XPM, High-Helix Long Type, V-XPM-EHL	XPM End Mill (High-Helix Long Type), XPM-EHL	XPM End Mill (Multi-Flute Short Type), XPM-EMS	XPM End Mill (Multi-Flute Long Type), XPM-EML	End Mill (2-Flute Short Type for Aluminum), AL-EDS	End Mill (2 Flutes, for Stainless Steel), SUS-EDS	V Coated XPM End Mill (2 Flutes, for Counterboring), VP-ZDS	Multi-Flute Extra Long EXML	3S End Mill, 2-Flute (Standard Blade)	3S End Mill, 2-Flute Long Blade	Long Shank End Mill 2 Blades	Special Long Shank End Mill, 2-Flute	3S End Mill, 6-Flute (Standard Blade)	3S End Mill, 4-Flute Long Blade	3S End Mill, 4-Flute Extra Long Blade	Long Shank End Mill 4 Blades	Special Long Shank End Mill, 4-Flute	End Mill for Keyway (Positive Tolerance)	End Mill for Keyway / BS Shank (Positive Tolerance)	End Mill for Keyway (Negative Tolerance)	End Mill for Keyway / BS Shank (Negative Tolerance)	V Coated XPM End Mill (2 Flutes, for Key Grooves), V-XPM-EKD (OL1)	For 2-Flute Key Groove EX-TIN-EKD (OLI)	For 2-Flute Key Groove EKD (OL1)	For 2-Flute Key Groove EKD (OL2)	For 2-Flute Key Groove EKD (OL3)	KHB2TS Hybrid Short 2-Flute Blade	P-VS2T P Coated 2-Flute Short Blade	SS2T S Coated Estech 2-Flute Short	SS2TM S Coated Estech 2-Flute Regular	STEC2TL ESTECH 2-Flute Long Blade	VS2T 2-Flute Short	LVS2T 2-Flute Blade Long Blade	P-VS3T P Coated 3-Flute Short Blade	P-VS4T P Coated 4-Flute Short Blade	SS4TL S Coated Estech 4-Flute Long	VS4T 4-Flute Short	VSM4T 4-Flute Regular	LVS4T 4-Flute Blade Long Blade
Starting from^∗	39.45 € *Unit price with basic configuration Volume Discount	40.35 € *Unit price with basic configuration Volume Discount	33.34 € *Unit price with basic configuration Volume Discount	39.05 € *Unit price with basic configuration Volume Discount	26.73 € *Unit price with basic configuration Volume Discount	50.87 € *Unit price with basic configuration Volume Discount	50.87 € *Unit price with basic configuration Volume Discount	38.05 € *Unit price with basic configuration Volume Discount	25.03 € *Unit price with basic configuration Volume Discount	30.34 € *Unit price with basic configuration Volume Discount	16.82 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	37.75 € *Unit price with basic configuration Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	29.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	43.96 € *Unit price with basic configuration	64.86 € *Unit price with basic configuration	82.06 € *Unit price with basic configuration	697.11 € *Unit price with basic configuration	48.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	48.94 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	45.43 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	81.87 € *Unit price with basic configuration	44.96 € *Unit price with basic configuration	43.42 € *Unit price with basic configuration Volume Discount	44.96 € *Unit price with basic configuration	43.42 € *Unit price with basic configuration Volume Discount	38.05 € *Unit price with basic configuration Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	16.62 € *Unit price with basic configuration Volume Discount	16.62 € *Unit price with basic configuration Volume Discount	20.73 € *Unit price with basic configuration Volume Discount	154.38 € *Unit price with basic configuration	79.44 € *Unit price with basic configuration	75.02 € *Unit price with basic configuration	53.75 € *Unit price with basic configuration	86.15 € *Unit price with basic configuration	31.48 € *Unit price with basic configuration	32.70 € *Unit price with basic configuration	43.71 € *Unit price with basic configuration	80.03 € *Unit price with basic configuration	84.20 € *Unit price with basic configuration	22.03 € Special price *Unit price with basic configuration Promotional pricing	33.55 € *Unit price with basic configuration	45.78 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	Same day	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	Same day	6 Days	6 Days
Blade diameter (D)(φ)	6 ～ 25	3 ～ 30	8 ～ 50	6 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	6 ～ 30	2 ～ 40	3 ～ 40	1.5 ～ 30	1.5 ～ 30	3 ～ 20	3 ～ 40	0.8 ～ 100	3 ～ 50	3 ～ 50	8 ～ 50	50 ～ 100	3 ～ 50	3 ～ 60	3 ～ 50	8 ～ 50	3 ～ 30	3 ～ 12	3 ～ 30	3 ～ 12	3 ～ 12	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	20	10.5 ～ 26	7.4 ～ 20	3 ～ 5	12 ～ 20	2.5 ～ 31.9	3 ～ 39	8 ～ 18	13 ～ 16.5	6 ～ 7	3 ～ 57	4.3 ～ 14.8	3 ～ 32
Blade length (ℓ)(mm)	15 ～ 50	15 ～ 90	20 ～ 75	15 ～ 55	15 ～ 55	25 ～ 105	25 ～ 105	25 ～ 105	8 ～ 65	15 ～ 110	4 ～ 55	4 ～ 55	8 ～ 38	30 ～ 150	2 ～ 80	15 ～ 120	30 ～ 120	20 ～ 75	75 ～ 80	20 ～ 125	30 ～ 300	30 ～ 120	20 ～ 75	5 ～ 30	4.5 ～ 18	5 ～ 30	4.5 ～ 18	5 ～ 15	5 ～ 25	5 ～ 25	5 ～ 25	5 ～ 25	45	22 ～ 50	15 ～ 45	10 ～ 15	55 ～ 100	6 ～ 60	20 ～ 100	20 ～ 40	35 ～ 40	35 ～ 40	10 ～ 85	12 ～ 35	30 ～ 200
work material	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Stainless Steel[◎]	General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	For Keyway	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	4	4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	4	4	2	2	2	4	2	2	2	2	6	4	4	4	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	4	4	4	4	4
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	High-speed steel	Alloy HSS	High-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Other	Other	Other	Other	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side
Shank diameter (d)(mm)	5 ～ 24	6 ～ 25	6 ～ 42	8 ～ 32	8 ～ 32	8 ～ 32	8 ～ 32	8 ～ 32	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	32 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	BS5	6 ～ 25	BS5	6 ～ 12	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	20	12 ～ 25	10 ～ 20	6	12 ～ 20	6 ～ 32	6 ～ 32	10 ～ 20	12 ～ 16	6 ～ 8	6 ～ 32	8 ～ 16	6 ～ 32
Coating	-	-	Non-Coated	TiN	Non-Coated	TiN	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiN	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiCN	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	85 ～ 160	65 ～ 180	80 ～ 350	65 ～ 150	65 ～ 150	75 ～ 200	75 ～ 200	75 ～ 200	55 ～ 165	65 ～ 210	45 ～ 125	45 ～ 125	50 ～ 125	70 ～ 235	42 ～ 180	53 ～ 215	100 ～ 300	100 ～ 350	160 ～ 180	58 ～ 220	70 ～ 400	100 ～ 300	100 ～ 350	50 ～ 100	62 ～ 76	50 ～ 100	62 ～ 76	50 ～ 70	50 ～ 95	50 ～ 95	50 ～ 95	50 ～ 95	115	85 ～ 130	65 ～ 115	60 ～ 65	110 ～ 175	50 ～ 145	60 ～ 185	65 ～ 110	90 ～ 100	80	50 ～ 185	60 ～ 95	70 ～ 275
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Other	Other	Other	Other	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340
- 350
- 400
Drawing

Clear