Square End Mills (HSS)（Coating：Non-Coated）

102

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

End Mill (Multi-Flute Center-Cutting Long Type), CC-EML

OSG

4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Long Type), LS-EML

OSG

General purpose 4 flute cutter with long shank made of cobalt high speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN

OSG

2-flute straight flute end mill, medium type for moulding using powder metal high speed steel CPM as base material. It can be formed into the shape required for use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated long flute 2 flute type of high speed steel powder square which can expect for durability
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	23.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

3S End Mill, 4-Flute Long Blade

FUKUDA

Long blade for cutting such as deep grooving and wide widths Repolishing is easy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.94 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	34.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

2-Flute General Use, Short EDS

OSG

High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS

OSG

Long shank form end mill with 4 blades for deep engraving. Set with a shank radius thinner than the blade bore.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL1T for 1-Flute Aluminum Sash

SANKO MFG

An end mill for machining aluminium wings.
Tool material: Cobalt high-speed steel, Working material: Aluminium
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of cutting edges (pcs.): 1
Rotation angle: Standard helix (30 to 44°).

Select to compare

Configure now
Starting from^∗ ：	46.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MT Patter Spiral End Mill SPE-MT (SKH51)

TAIYO-TOOL

[Cutting Edge Shape Type]
· Square
[Tool Grade]
· High-speed steel
[Coating]
· Non-Coated

Select to compare

Configure now
Starting from^∗ ：	98.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

MISUMI

[Features]
-High speed steel powder, square, uncoated, short flute length, 2 flute type, which promises long life
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High speed steel powder square uncoated regular flute length 2-flute type, which can expect for durability
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	19.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

MISUMI

[Features]
-High speed steel powder, square, uncoated, short flute length, 4 flute type, which promises long life
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	21.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High speed steel powder square uncoated regular flute length 4 flute type which can be expected for durability
-Can be reground. Please refer to the "Regrinding Service" page for how to proceed, what services you can avail, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-Powdered high-speed steel, square, uncoated, long flute length, 4-flute type, which is expected to last a long time
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, performance range, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	26.12 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

MISUMI

[Features]
-Quick-action steel uncoated, square, short, 2-bladed with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	10.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High-speed steel uncoated, square, normal blade length, 2-groove type with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	11.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

MISUMI

[Features]
-High speed steel uncoated, square, long flutes, 2 flute type with up to ø50
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	13.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute short cutting edge
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	12.05 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

MISUMI

[Features]
-Uncoated 4-slot blade with normal length
-Effective for side milling with 40° helix angle, which is stronger than the standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	14.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute design with long flute
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	16.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Corner C End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High-speed steel 2-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, Long 4-Flute RSL4SE

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	43.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, 4-Flute 4RSE

NACHI(FUJIKOSHI)

[Features]
A super hard general purpose cutter with 4 cutting edges.
Made from cobalt high speed steel and offers great value for money.
[Features]
Suitable for side milling etc, on wide and deep sides.

Select to compare

Configure now
Starting from^∗ ：	36.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Regular Shank, Long 2-Flute RSL2SE

NACHI(FUJIKOSHI)

General purpose end mill. Suitable for deep grooving and plunging in deep places.

Select to compare

Configure now
Starting from^∗ ：	39.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, Long 4-Flute SL4SE

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	43.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

NATAC, 2-Flute 2NAC

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Extra Long EXDL

OSG

2-flute milling cutter for general purposes in super-long design with cobalt high-speed steel as basic material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OH1)

OSG

2 flute general purpose cutters with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute General Use, Medium

OSG

Universal 2-flute cutter in medium design with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Medium LS-EDN

OSG

Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

2-Flute General Use, Long

OSG

Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

End Mill (3-Flute General-Purpose Short Type), ETS

OSG

Short 3 flute cutter for general purpose using cobalt high speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-Flute Center Cut Short CC-EMS

OSG

Cobalt high speed steel centre cut.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4
Skew angle: standard spiral (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill (Multi-Flute Long-Shank Short Type), LS-EMS

OSG

General purpose cutter with 4 cutting edges and long shank in short design made of cobalt high speed steel as basic material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare
Brand	OSG	OSG	OSG	MISUMI	FUKUDA	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	SANKO MFG	TAIYO-TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	End Mill (Multi-Flute Center-Cutting Long Type), CC-EML	End Mill (Multi-Flute Long-Shank Long Type), LS-EML	CPM End Mill (Medium for 2-Flute, Straight Blade Shape) CPM-STDN	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	3S End Mill, 4-Flute Long Blade	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	Super Hard, 4-Flute 4SE	2-Flute General Use, Short EDS	XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS	AL1T for 1-Flute Aluminum Sash	MT Patter Spiral End Mill SPE-MT (SKH51)	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	High-Speed Steel Corner C End Mill, 2-Flute / Short Model	High-Speed Steel Corner C End Mill, 2-Flute / Regular Model	High-Speed Steel Corner C End Mill, 4-Flute / Short Model	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short	Super Hard, 2-Flute 2SE	Super Hard, Regular Shank, Long 4-Flute RSL4SE	Super Hard, Regular Shank, 4-Flute 4RSE	Super Hard, Regular Shank, Long 2-Flute RSL2SE	Super Hard, Long 4-Flute SL4SE	NATAC, 2-Flute 2NAC	2-Flute Extra Long EXDL	For 2-Flute Key Groove EKD (OH1)	2-Flute General Use, Medium	2-Flute Long Shank Medium LS-EDN	2-Flute General Use, Long	End Mill (3-Flute General-Purpose Short Type), ETS	Multi-Flute Center Cut Short CC-EMS	End Mill (Multi-Flute Long-Shank Short Type), LS-EMS
Starting from^∗	19.92 € *Unit price with basic configuration Volume Discount	32.54 € *Unit price with basic configuration Volume Discount	24.83 € *Unit price with basic configuration Volume Discount	23.76 € *Unit price with basic configuration Volume Discount	48.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	-	34.50 € *Unit price with basic configuration	15.46 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	33.34 € *Unit price with basic configuration Volume Discount	46.41 € *Unit price with basic configuration	98.66 € *Unit price with basic configuration	18.92 € *Unit price with basic configuration Volume Discount	19.98 € *Unit price with basic configuration Volume Discount	21.82 € *Unit price with basic configuration Volume Discount	22.54 € *Unit price with basic configuration Volume Discount	26.12 € *Unit price with basic configuration Volume Discount	10.56 € *Unit price with basic configuration Volume Discount	11.31 € *Unit price with basic configuration Volume Discount	13.32 € *Unit price with basic configuration Volume Discount	12.05 € *Unit price with basic configuration Volume Discount	14.55 € *Unit price with basic configuration Volume Discount	16.74 € *Unit price with basic configuration Volume Discount	-	-	-	-	-	-	-	-	-	31.37 € *Unit price with basic configuration	43.48 € *Unit price with basic configuration	36.57 € *Unit price with basic configuration	39.81 € *Unit price with basic configuration	43.90 € *Unit price with basic configuration	19.66 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	26.33 € *Unit price with basic configuration Volume Discount	16.96 € *Unit price with basic configuration Volume Discount	16.24 € *Unit price with basic configuration Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	18.22 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	18.62 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	16.82 € *Unit price with basic configuration Volume Discount	30.84 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	6 Days	6 Days	5 Days	Same day	7 Days	6 Days	Same day	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days
Specifications				Non-Coated 2 Flutes L (Long)		Non-Coated 2 Flutes R (Regular)						Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 40	10 ～ 40	1.5 ～ 20	3 ～ 25	3 ～ 50	2.7 ～ 24.99	2.5 ～ 50	0.45 ～ 60	8 ～ 50	6 ～ 12	3/4 ～ 60	1 ～ 40	1 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 40	3 ～ 30	3 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 25	1 ～ 50	4 ～ 18	4 ～ 18	4 ～ 18	3 ～ 40	1.2 ～ 20	3 ～ 40	3 ～ 25	1 ～ 20	10 ～ 40	0.8 ～ 40	1 ～ 30	2.5 ～ 40	10 ～ 50
Blade length (ℓ)(mm)	15 ～ 110	45 ～ 110	5 ～ 45	15 ～ 90	20 ～ 125	10 ～ 60	7 ～ 70	1.1 ～ 80	20 ～ 75	18 ～ 45	25 ～ 75	2.5 ～ 65	3.5 ～ 60	8 ～ 45	12 ～ 68	15 ～ 90	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	8 ～ 50	10 ～ 60	8 ～ 45	12 ～ 68	-	-	-	-	8 ～ 50	2 ～ 70	20 ～ 65	12 ～ 40	20 ～ 65	15 ～ 125	2.5 ～ 40	30 ～ 150	5 ～ 25	3.5 ～ 45	25 ～ 65	6 ～ 110	2.5 ～ 55	10 ～ 65	25 ～ 75
work material	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎]	-	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	4	4	2	2	4	2	4	2	4	1	6 ～ 14	2	2	4	4	4	2	2	2	4	4	4	2	2	4	4	2	2	4	4	2	2	4	4	2	4	2	2	2	2	2	2	3	4	4
Tool Material Type	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Shank diameter (d)(mm)	6 ～ 32	10 ～ 32	6 ～ 20	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 42	8 ～ 12	-	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25	6 ～ 42	6 ～ 16	6 ～ 16	6 ～ 16	6 ～ 32	6 ～ 20	6 ～ 32	6 ～ 25	6 ～ 20	10 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	10 ～ 42
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	60 ～ 195	125 ～ 285	45 ～ 110	60 ～ 160	58 ～ 220	50 ～ 130	50 ～ 160	45 ～ 170	80 ～ 350	80 ～ 100	115 ～ 250.5	45 ～ 150	45 ～ 130	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	50 ～ 120	50 ～ 130	52 ～ 121	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 120	50 ～ 160	55 ～ 120	45 ～ 95	55 ～ 120	60 ～ 210	50 ～ 110	70 ～ 235	50 ～ 95	45 ～ 110	125 ～ 235	50 ～ 195	45 ～ 125	50 ～ 150	125 ～ 340
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	-	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	-	-	-	Available	Available	Available	-	-	-	Available	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	28 ～ 66	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	Straight	Straight	Straight	-	-	-	-	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear