Rejestracja
1
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Blade diameter (D)(φ)
    [2.7–3/0.01φ jedn.]
    [3.15–3.5/0.01φ jedn.]
    [3.6–4/0.01φ jedn.]
    [4.05–16/0.01φ jedn.]
    [17–19.99/0.01φ jedn.]
    [20.01–22.99/0.01φ jedn.]
    [24–25/0.01φ jedn.]
  • Blade length (ℓ)(mm)
  • Blade shape type
  • Number of flutes(sheet)
    • 2-Flute General Use, Short EDS
      • ZNIŻKA
      • Volume Discount

      OSG

      2-Flute General Use, Short EDS

      High speed steel square series.Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copperCoating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Zerration angle: Standard helix (30 to 44°).
      Czytaj dalej
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.45 ~ 601.1 ~ 80General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
      Cena standardowa (bez VAT):
      15.46 €
      Cena standardowa (bez VAT):
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
      • Volume Discount
      • AS
      • 3 Flutes
      • S (Short)

      MISUMI

      AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

      [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
      Cena standardowa (bez VAT):
      54.09 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • 2-Flute General Use, Long
      • ZNIŻKA
      • Volume Discount

      OSG

      2-Flute General Use, Long

      Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.
      Czytaj dalej
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      0.8 ~ 406 ~ 110General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 32Non-Coated
      Cena standardowa (bez VAT):
      18.22 €
      Cena standardowa (bez VAT):
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • End Mill (2 Flutes, for Stainless Steel), SUS-EDS
      • ZNIŻKA
      • Volume Discount

      OSG

      End Mill (2 Flutes, for Stainless Steel), SUS-EDS

      2-flute end mills short for stainless steel with cobalt high-speed steel as base material.
      Czytaj dalej
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      1.5 ~ 304 ~ 55General Steel[○] / Stainless Steel[◎]Square2Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
      Cena standardowa (bez VAT):
      18.42 €
      Cena standardowa (bez VAT):
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • V Coated XPM End Mill (Roughing Short Fine-Pitch Type), VP-RESF
      • Volume Discount

      OSG

      V Coated XPM End Mill (Roughing Short Fine-Pitch Type), VP-RESF

      V coating applied powder high speed XPM roughing short blade series. Effective on difficult-to-machine materials.
      Czytaj dalej
      Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
      6 ~ 5011 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]Roughing4 ~ 6Powder high-speed steelPlane / Side / Groove6 ~ 42-
      Cena standardowa (bez VAT):
      60.98 €
      Standardowa data wysyłki:
      6 dni robocze
      Konfiguruj
    • V-WEMS, HSS-Co end mill

        OSG

        V-WEMS, HSS-Co end mill

        HSS-Co end mill - Multiflute, short length of cut - Weldon shank
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        ---------
        Cena standardowa (bez VAT):
        23.80 €
        Standardowa data wysyłki:
        4 dni robocze
        Konfiguruj
      • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
        • Volume Discount
        • TiCN
        • 4 Flutes
        • R (Regular)

        MISUMI

        TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

        Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
        Cena standardowa (bez VAT):
        40.05 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
        • Volume Discount
        • AS
        • 2 Flutes
        • L (Long)

        MISUMI

        AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

        [Features] -Suitable for milling deep cavities-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 4015 ~ 110General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
        Cena standardowa (bez VAT):
        22.54 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 4 Flutes
        • S (Short)

        MISUMI

        Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

        [Features] -High speed steel powder, square, uncoated, short flute length, 4 flute type, which promises long life-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        3 ~ 258 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 25Non-Coated
        Cena standardowa (bez VAT):
        20.97 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
        • Volume Discount
        • Non-Coated
        • 2 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

        [Features] -Quick-action steel uncoated, square, short, 2-bladed with up to ø50-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        1 ~ 502.5 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 42Non-Coated
        Cena standardowa (bez VAT):
        10.16 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model
        • Non-Coated
        • 4 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

        [Features] -High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        8 ~ 25-General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Countersinking10 ~ 25TiCN / Non-Coated
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
        • Non-Coated
        • 2 Flutes
        • S (Short)

        MISUMI

        High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

        [Features] -High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
        2.7 ~ 258 ~ 50General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Cobalt HSSPlane / Side / Groove / Countersinking6 ~ 25TiCN / Non-Coated
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • AG Mill, 4-Flute 4AGE

          NACHI(FUJIKOSHI)

          AG Mill, 4-Flute 4AGE

          Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.
          Czytaj dalej
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          4.5 ~ 5015 ~ 70General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Square4Cobalt HSSPlane / Side / Groove / Inclined Cuts8 ~ 32AG
          Cena standardowa (bez VAT):
          44.74 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Rough and Finish End Mills RFE
          • Volume Discount

          OSG

          Rough and Finish End Mills RFE

          Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.
          Czytaj dalej
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          12 ~ 5040 ~ 120General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 8Cobalt HSSPlane / Side / Groove12 ~ 42Non-Coated
          Cena standardowa (bez VAT):
          74.50 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • 3S End Mill, 4-Flute Extra Long Blade
          • ZNIŻKA
          • Volume Discount

          FUKUDA

          3S End Mill, 4-Flute Extra Long Blade

          Long blade for cutting such as deep grooving and wide widths Repolishing is easy
          Czytaj dalej
          Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
          3 ~ 6030 ~ 300Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]Square4Alloy HSSPlane / Side / Groove6 ~ 42Non-Coated
          Cena standardowa (bez VAT):
          47.06 €
          Cena standardowa (bez VAT):
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • V-XPM-WRESF, Powder metal end mill

            OSG

            V-XPM-WRESF, Powder metal end mill

            Powder metal end mill - Multiflute, for roughing, short length of cut - Weldon shank
            Czytaj dalej
            Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
            ---------
            Cena standardowa (bez VAT):
            57.10 €
            Standardowa data wysyłki:
            4 dni robocze
            Konfiguruj
          • V-WEML, HSS-Co end mill

              OSG

              V-WEML, HSS-Co end mill

              HSS-Co end mill - Multiflute, long length of cut - Weldon shank
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              ---------
              Cena standardowa (bez VAT):
              31.60 €
              Standardowa data wysyłki:
              4 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut

              The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              46.54 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • R (Regular)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut

              The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              52.20 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • L (Long)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut

              The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              69.77 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
              • Volume Discount
              • AS
              • 3 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut

              The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              57.35 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

              [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              44.14 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • R (Regular)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut

              [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3019 ~ 68General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              51.92 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • L (Long)

              MISUMI

              AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

              [Features] -The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              68.91 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
              • Volume Discount
              • TiCN
              • 4 Flutes
              • S (Short)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut

              Powdered HSS with high durability is available more cheaply than the cobalt HSS market price
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3213 ~ 53General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 32TiCN
              Cena standardowa (bez VAT):
              30.25 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
              • Volume Discount
              • TiCN
              • 4 Flutes
              • L (Long)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut

              [Features] -High-speed steel powder roughing type with long flute length expected to last long-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 3045 ~ 90General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25TiCN
              Cena standardowa (bez VAT):
              56.01 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
              • Volume Discount
              • TiCN
              • 3 Flutes
              • S (Short)

              MISUMI

              TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

              [Features] -Long shank of high-speed steel powder expected to last a long time-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25TiCN
              Cena standardowa (bez VAT):
              53.30 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut

              [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5 ~ 5013 ~ 75General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              29.75 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • R (Regular)

              MISUMI

              AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut

              [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 5019 ~ 112General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              37.69 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
              • Volume Discount
              • AS
              • 4 Flutes
              • L (Long)

              MISUMI

              AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut

              [Features] -High-speed steel roughing cutter that offers both good machining performance and reasonable price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 5045 ~ 150General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              45.78 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
              • Volume Discount
              • AS
              • 3 Flutes
              • S (Short)

              MISUMI

              AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut

              [Features] -High-speed roughing cutter made of steel, which offers both good machining performance and good price-The coating has high oxidation resistance and high hardness, and has a long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3011 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              42.12 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • S (Short)

              MISUMI

              Powdered High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

              [Features] -Uncoated short flutes of high-speed steel powder expected to last a long time-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5 ~ 3013 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
              Cena standardowa (bez VAT):
              37.85 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • R (Regular)

              MISUMI

              Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

              [Features] -High speed steel powder roughers uncoated with normal flute length, expecting long life-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3019 ~ 68General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 5Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
              Cena standardowa (bez VAT):
              48.25 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • L (Long)

              MISUMI

              Powdered High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

              [Features] -High speed steel powder roughing, uncoated, with long flute length expected to last a long time-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 2545 ~ 90General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4Powder high-speed steelPlane / Side / Groove / Inclined Cuts10 ~ 25Non-Coated
              Cena standardowa (bez VAT):
              68.31 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 3 Flutes
              • S (Short)

              MISUMI

              Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

              [Features] -Uncoated long shank blade made of high-speed steel powder for roughing, which can be expected to have a long service life-Suitable for milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3011 ~ 45General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Powder high-speed steelPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
              Cena standardowa (bez VAT):
              49.15 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • S (Short)

              MISUMI

              High-Speed Steel Roughing End Mill, Short, Center Cut / Non-Coated Model

              [Features] -High-speed steel roughing, uncoated, short flute length with optimum pitch width for rough finishing-Can be reground. Please refer to the "Regrinding Service" page for details of how to proceed, what services you can take advantage of, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5 ~ 5013 ~ 75General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
              Cena standardowa (bez VAT):
              21.82 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • R (Regular)

              MISUMI

              High-Speed Steel Roughing End Mill, Regular, Center Cut / Non-Coated Model

              [Features] -High-speed steel roughing cutter without coating with regular flute length and optimum pitch width for roughing-Can be reground. Please refer to the "Regrinding Service" page to find out how to proceed, what services you can take advantage of, what the prices are, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 5019 ~ 112General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 42Non-Coated
              Cena standardowa (bez VAT):
              30.11 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 4 Flutes
              • L (Long)

              MISUMI

              High-Speed Steel Roughing End Mill, Long, Center Cut / Non-Coated Model

              [Features] -High speed steel roughing cutter with uncoated long flute with optimum pitch width for roughing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              10 ~ 5045 ~ 150General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing4 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts10 ~ 42Non-Coated
              Cena standardowa (bez VAT):
              37.18 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model
              • Volume Discount
              • Non-Coated
              • 3 Flutes
              • S (Short)

              MISUMI

              High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut / Non-Coated Model

              [Features] -High speed steel roughing cutter with uncoated long shank and optimum pitch width for rough finishing-Suitable for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 3011 ~ 45General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 4Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25Non-Coated
              Cena standardowa (bez VAT):
              37.78 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
              • Volume Discount
              • TiAlN
              • S (Short)

              MISUMI

              TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut

              [Features] -Short flute high-speed steel roughing cutter with standard TiAlN coating-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              5 ~ 3013 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Roughing3 ~ 6Cobalt HSSPlane / Side / Groove / Inclined Cuts6 ~ 25TiAlN
              Cena standardowa (bez VAT):
              27.27 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short
              • Volume Discount
              • AS
              • 3 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short

              [Features] -High-spiral design with excellent machinability, therefore suitable for a wide range of applications from heavy machining to finishing-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Powder high-speed steelPlane / Side / Groove / Inclined Cuts / Countersinking8 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              33.72 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short

              [Features] -High flute design with excellent machinability, so it can be used for a wide range of applications from heavy machining to fine cutting-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 2515 ~ 50General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking8 ~ 25For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              36.53 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
              • Volume Discount
              • AS
              • 3 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 3-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

              [Features] -The cutting force is reduced as the notches on the peripheral edge dissipate chips-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 2015 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square3Powder high-speed steelPlane / Side / Groove / Inclined Cuts / Countersinking8 ~ 20For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              44.25 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge
              • Volume Discount
              • AS
              • 4 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 4-Flute, 50° Spiral, Short, with Nicked Peripheral Cutting Edge

              [Features] -The cutting force is reduced as the notches on the peripheral edge divert chips-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              6 ~ 2015 ~ 45General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Square4Powder high-speed steelPlane / Side / Groove / Countersinking8 ~ 20For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              44.48 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short
              • Volume Discount
              • AS
              • 2 Flutes
              • S (Short)

              MISUMI

              AS Coated Powdered High-Speed Steel Square End Mill, 2-Flute, Short

              [Features] -High speed steel powder square short blade length 2-flute type, which can expect for durability-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
              Czytaj dalej
              Blade diameter (D)(φ)Blade length (ℓ)(mm)work materialBlade shape typeNumber of flutes(sheet)Tool Material TypeMachining ApplicationShank diameter (d)(mm)Coating
              1 ~ 402.5 ~ 65General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Square2Powder high-speed steelPlane / Side / Groove / Countersinking6 ~ 32For High Hardness (Silicon Group)
              Cena standardowa (bez VAT):
              26.46 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj

            Nie ma tu produktu, którego szukasz?