Carbide Radius End Mills（work material：High Hardness Steel: to HRC60）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels
NS TOOL
Superior surface finish with excellent chipping prevention and reduced chattering due to the use of MUGEN coating for hardened steels and a new shape- Volume Discount
- Stock
Configure nowStarting from∗ ： 53.49 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
HLRS2000 HM Coated 2 Flute Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet type- Volume Discount
Configure nowStarting from∗ ： 43.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
HRRS, HM Coated 4-Flute Radius
UNION TOOL
[Features]
· Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
· The optimized corner radius size enables processing with larger feed than conventional
· Seamless Corner Radius Shape
· High hardness materials up to 65 HRC can also be machinedConfigure nowStarting from∗ ： 76.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 89.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
MISUMI
[Features]
-High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners
-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners
-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
Configure nowStarting from∗ ： 61.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS
OSG
Suppressing chatter due to the effect of evolutionary "unequal lead".- Volume Discount
Configure nowStarting from∗ ： 145.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
HLRS 4-Flute Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Rigidity-oriented blade shape provides long life even when machining high hardness materials
· Capable of stable machining for both dry and wet type
· New HARDMAX coating adopted to improve oxidation resistance.Configure nowStarting from∗ ： 55.58 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius
UNION TOOL
[Features]
· Long neck radius shape that exhibits power in high-performance and high-quality machining
· Capable of cutting everything from raw materials to high-hardness materials
· Capable of stable, long-life machining for both dry and wet typeConfigure nowStarting from∗ ： 60.34 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
CRS40HSP High Efficiency 3-Flute Long Neck Radius 40° Twist
UNION TOOL
[Features]
· High Efficiency 3-Flute Long Neck Radius (Short Blade)
· 40° Torsion
· Supports materials from SUS to pre-hardened and hardened steel (60 HRC)Configure nowStarting from∗ ： 70.40 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.Configure nowStarting from∗ ： 101.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 117.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 111.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 93.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible
-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-use for engraving, side face, rough and medium grinding.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Configure nowStarting from∗ ： 84.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining
-Multi-faceted type that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 79.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-purpose for engraving, side face, rough and medium finishing
-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 54.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Variable design that can be used for engraving, side faces, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 74.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
MISUMI
Long neck type with interference prevention can be selected from a number of effective lengths- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 88.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]
-Multi-functional long neck radius with high feed rate and excellent durability
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Configure nowMin. Shipping Days ： 8 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Configure nowStarting from∗ ： 83.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Conical neck effectively suppresses chatter
-Variable design that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 97.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model
MISUMI
The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining- Volume Discount
- TS
- High-Hardness Steel
- 4 Flutes
- B (Stub)
Configure nowStarting from∗ ： 96.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model
MISUMI
[Features]
-High helix angle and radius end mill for machining high hardness steel
-High tool rigidity minimises tool tilt when side milling
-Machining high hardness steel up to 65HRC is possible
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- Multi-Flutes （5 ~）
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-The long neck type is ideal for milling deep pockets, etc.
-Multi-use for engraving, side faces, R, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Configure nowStarting from∗ ： 86.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Configure nowStarting from∗ ： 86.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
GS MILL Hard Radius GSH-R
NACHI(FUJIKOSHI)
Chipping resistance is excellent, making it ideal for corner R and contour machining of high hardness material.- Volume Discount
Configure nowStarting from∗ ： 124.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 130.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GS MILL radius GS4-R
NACHI(FUJIKOSHI)
Suitable for corner R machining and high-speed contouring of molds and machine parts.- Volume Discount
Configure nowStarting from∗ ： 86.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
X's Mill Geo Radius 4XSGEO-R
NACHI(FUJIKOSHI)
Suitable for corner R machining and contouring of molds and machine parts.- Volume Discount
Configure nowStarting from∗ ： 113.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute, Corner R Short, CBN-CR-EDS
OSG
2-flute CBN-CR-EDS with short corner radius
-shows high performance in machining high-strength materials.Configure nowStarting from∗ ： 187.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-EDS-6
OSG
Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.Configure nowStarting from∗ ： 65.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Corner R Short FX-CR-MG-EDS
OSG
Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.- Volume Discount
Configure nowStarting from∗ ： 59.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.Configure nowStarting from∗ ： 98.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopt WXS coating of ultra heat-resistant and ultra-hard coatingConfigure nowStarting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS
OSG
Sharp positive cutting edge prevents the occurrence of work hardening and similar. With corner R, it can support a variety of cutter paths.Configure nowStarting from∗ ： 95.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill (Super Radius), WX-CRE
OSG
New type of radius end mill that achieves high efficiency in roughing of mold. Performs high-efficiency direct carving of hardened steel.- Volume Discount
Configure nowStarting from∗ ： 89.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Powerful Type Multi-Function FXS-PKE
OSG
In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.- Volume Discount
Configure nowStarting from∗ ： 95.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE
OSG
Suitable for high efficiency machining of pocket engraving by required minimum blade length and strength torsion. The total length of the tool just fits to shrink - HSK.- Volume Discount
Configure nowStarting from∗ ： 122.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS
OSG
High helix radius end mill with both chip discharge ability and cutting edge rigidity at high level. In addition to the usual two-dimensional processing, supports a wide range of cutter paths such as ramping and profile machining.- Volume Discount
Configure nowStarting from∗ ： 116.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS
OSG
Radius end mills for high rigidity high-speed machining. Can perform high-speed machining of hardened steel.- Volume Discount
Configure nowStarting from∗ ： 106.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Function Type for Deep Wall Applications FXS-MFE
OSG
A wide standing wall is machined with high efficiency and precision in step cutting.
Coated for steel
Standard/Alteration Category: Manufacturer's standard product
Number of flutes (pcs.) 4
Spiral angle, Strong spiral (45 to 60°).Configure nowStarting from∗ ： 225.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape machining of mold. Performs also high-speed cutting of hardened steel due to WXS coating with excellent heat resistance.- Volume Discount
Configure nowStarting from∗ ： 72.80 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Phoenix Pencil Neck Deep Feeders Radius, PHX-PC-DFR
OSG
Radius cutter with pencil neck, which enables highly efficient machining of deep parts prone to chattering and hard-to-cut materials.- Volume Discount
Configure nowStarting from∗ ： 85.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Neck Deep Feeders Radius, PHX-LN-DFR
OSG
It enables highly efficient machining of deep parts that tend to chatter and of materials that are difficult to machine. Radius cutter with long neck.Configure nowStarting from∗ ： 83.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HRRS, HM Coated 4-Flute Short Shank Radius
UNION TOOL
[Features]
· Unique corner rounding creates larger cutting depth and pick feed than with a ball
· The seamless corner radius shape reduces cutting resistance and chattering
· High hardness materials up to 65 HRC can also be machinedConfigure nowStarting from∗ ： 76.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NS TOOL | UNION TOOL | UNION TOOL | MISUMI | MISUMI | OSG | UNION TOOL | UNION TOOL | UNION TOOL | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL |
| Product Series | MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade | Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS | HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius | CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model | TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS | Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE | WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS | Carbide End Mill WX Super Coating (High Precision Bull Nose) WXS-CPR | |||||||||||||||||||||||||||
| Starting from∗ | 53.49 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 43.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 76.38 € *Unit price with basic configuration | 89.61 € *Unit price with basic configuration Volume Discount | 61.48 € *Unit price with basic configuration Volume Discount | 145.60 € *Unit price with basic configuration Volume Discount | 55.58 € Special price *Unit price with basic configuration Promotional pricing | 60.34 € Special price *Unit price with basic configuration Promotional pricing | 70.40 € *Unit price with basic configuration | 101.29 € *Unit price with basic configuration | 117.55 € *Unit price with basic configuration Volume Discount | 111.66 € *Unit price with basic configuration Volume Discount | 93.03 € *Unit price with basic configuration Volume Discount | 84.39 € *Unit price with basic configuration Volume Discount | 79.89 € *Unit price with basic configuration Volume Discount | 54.32 € *Unit price with basic configuration Volume Discount | 74.55 € *Unit price with basic configuration Volume Discount | 88.68 € *Unit price with basic configuration Volume Discount | - Volume Discount | 83.63 € *Unit price with basic configuration Volume Discount | 97.30 € *Unit price with basic configuration Volume Discount | 96.21 € *Unit price with basic configuration Volume Discount | - Volume Discount | 86.79 € *Unit price with basic configuration Volume Discount | 86.33 € *Unit price with basic configuration Volume Discount | 124.12 € *Unit price with basic configuration Volume Discount | 130.87 € *Unit price with basic configuration Volume Discount | 86.52 € *Unit price with basic configuration Volume Discount | 113.49 € *Unit price with basic configuration Volume Discount | 187.96 € *Unit price with basic configuration | 65.64 € *Unit price with basic configuration | 59.59 € *Unit price with basic configuration Volume Discount | 98.58 € *Unit price with basic configuration | 88.29 € *Unit price with basic configuration | 95.88 € *Unit price with basic configuration | 89.60 € *Unit price with basic configuration Volume Discount | 95.20 € *Unit price with basic configuration Volume Discount | 122.60 € *Unit price with basic configuration Volume Discount | 116.30 € *Unit price with basic configuration Volume Discount | 106.85 € *Unit price with basic configuration Volume Discount | 225.60 € *Unit price with basic configuration | 72.80 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 85.23 € *Unit price with basic configuration Volume Discount | 83.42 € *Unit price with basic configuration | 76.10 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | 6 Days | 5 Days | 5 Days | 5 Days | Same day | Same day | 9 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 6 | 0.4 ～ 6 | 2 ～ 12 | 4 ～ 12 | 3 ～ 12 | 6 ～ 25 | 0.8 ～ 6 | 0.2 ～ 6 | 3 ～ 12 | 0.5 ～ 3 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 20 | 4 ～ 16 | 4 | 3 ～ 12 | 3 ～ 12 | 2 ～ 6 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 20 | 3 ～ 20 | 3 ～ 12 | 3 ～ 20 | 3 ～ 6 | 0.5 ～ 2.5 | 1 ～ 12 | 1 ～ 5 | 6 ～ 20 | 6 ～ 12 | 2 ～ 13 | 3 ～ 20 | 6 ～ 12 | 6 | 6 ～ 25 | 10 | 0.2 ～ 4 | 2 ～ 12 | 4 ～ 16 | 2 ～ 12 |
| R Size(mm) | 0.05 ～ 1 | 0.05 ～ 1 | 0.3 ～ 4 | 0.813 ～ 2.438 | 0.75 ～ 3 | 0.3 ～ 5 | 0.05 ～ 1 | 0.05 ～ 1 | 0.1 ～ 0.5 | 0.05 ～ 0.5 | 0.813 ～ 2.438 | 0.813 ～ 2.607 | 0.813 ～ 2.438 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 3 | 1 ～ 3 | 0.5 | 0.8 ～ 2 | 0.8 ～ 2 | 0.2 ～ 0.5 | 0.5 ～ 2 | 1 ～ 2 | 0.2 ～ 1 | 0.2 ～ 2 | 0.2 ～ 2 | 0.2 ～ 2 | 0.2 ～ 3 | 0.2 ～ 2 | 0.1 | 0.1 ～ 3 | 0.3 ～ 1 | 1.5 ～ 3 | 0.2 | 0.5 ～ 3 | 0.2 ～ 3 | 0.5 ～ 1 | 0.3 | 0.2 ～ 3 | 0.5 | 0.05 ～ 0.5 | 0.5 ～ 2 | 1 ～ 3 | 0.3 ～ 4 |
| work material | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[○] | High Hardness Steel: to HRC60[◎] |
| Blade length (ℓ)(mm) | 0.8 ～ 5 | 0.4 ～ 6 | 2 ～ 12 | 8 ～ 24 | 1.2 ～ 5 | 12 ～ 50 | 0.48 ～ 4.8 | 0.2 ～ 6 | 4 ～ 15 | 0.3 ～ 1.8 | 8 ～ 24 | 8 ～ 40 | 8 ～ 24 | 2 ～ 12 | 4 ～ 24 | 2 ～ 12 | 4 ～ 40 | 6 ～ 24 | 3.2 | 4.5 ～ 18 | 4.5 ～ 18 | 3 ～ 9 | 5 ～ 12 | 8 ～ 24 | 18 ～ 38 | 13 ～ 38 | 4.5 ～ 30 | 7.5 ～ 26 | 8 ～ 38 | 3 ～ 6 | 0.7 ～ 3.7 | 2.5 ～ 26 | 2 ～ 10 | 12 ～ 40 | 13 ～ 26 | 0.8 ～ 5.5 | 5 ～ 30 | 9 ～ 18 | 13 | 15 ～ 50 | 15 | 0.15 ～ 4 | 3 ～ 18 | 6 ～ 24 | 2 ～ 12 |
| Number of flutes(sheet) | 4 | 2 | 4 | 3 | 4 | 6 | 4 | 2 | 3 | 2 | 3 | 4 | 4 | 3 | 3 | 4 | 4 | 4 | 4 | 3 | 4 | 4 | 6 | 3 | 4 | 6 ～ 8 | 4 | 4 | 4 | 2 | 2 | 2 | 3 | 3 | 4 | 3 ～ 4 | 4 | 4 | 4 | 6 ～ 8 | 4 | 2 ～ 4 | 3 | 3 | 4 |
| Type | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | High-Feed Radius | High-Feed Radius | Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | High-Feed Radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | High-Feed Radius | Radius | Long-Neck Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius |
| Overall Length (L)(mm) | 50 ～ 110 | 50 ～ 120 | 70 ～ 120 | 80 ～ 160 | 60 ～ 110 | 50 ～ 120 | 50 ～ 120 | 50 ～ 100 | 38 ～ 120 | 45 ～ 50 | 50 ～ 100 | 50 ～ 150 | 80 ～ 160 | 50 ～ 100 | 50 ～ 100 | 50 ～ 100 | 50 ～ 130 | 70 ～ 180 | 70 | 80 ～ 160 | 80 ～ 160 | 50 | 60 ～ 85 | 70 ～ 140 | 60 ～ 100 | 50 ～ 100 | 60 ～ 200 | 45 ～ 75 | 50 ～ 125 | 45 ～ 50 | 50 | 40 ～ 110 | 60 ～ 70 | 80 ～ 150 | 90 ～ 110 | 60 ～ 110 | 60 ～ 160 | 50 ～ 80 | 60 | 90 ～ 180 | 130 | 50 ～ 80 | 60 ～ 220 | 70 ～ 175 | 45 ～ 75 |
| Shank diameter (d)(mm) | 4 ～ 6 | 4 ～ 6 | 3 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 25 | 4 ～ 6 | 4 ～ 6 | 3 ～ 12 | 4 ～ 6 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 16 | 6 | 6 ～ 16 | 6 ～ 16 | 6 | 6 ～ 12 | 4 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 | 6 | 4 ～ 12 | 6 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 6 | 6 ～ 25 | 8 | 4 ～ 6 | 6 ～ 20 | 4 ～ 16 | 3 ～ 12 |
| Underneck length (ℓ1)(mm) | 2 ～ 48 | 1 ～ 60 | 6 ～ 36 | 35 ～ 108 | 7.5 ～ 24 | - | 2 ～ 48 | 0.5 ～ 30 | 7 ～ 54 | 1.5 ～ 6 | - | - | 35 ～ 108 | - | - | - | - | - | - | 24 ～ 105 | 24 ～ 105 | - | 11 ～ 55 | - | - | - | 12 ～ - | - | - | - | 1.5 ～ 5 | - | 4 ～ 15 | - | - | 5 ～ 24 | 9 ～ 60 | - | - | - | - | 0.5 ～ 35 | 10 ～ 160.8 | 20 ～ 120 | 6 ～ 36 |
| Machining Application | Plane / Side / Groove | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface / Groove / Inclined Cuts | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface / Groove / Plunging (Z feed) | Plane / Side / Curved surface |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | - | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | No torsion | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) |
| R Precision(μm) | 0.005 to -0.005 ～ 0.01～-0.01 | - | - | - | ±0.02 | - | - | - | - | - | - | - | - | ±0.015 | ±0.015 | ±0.015 | ±0.015 | ±0.015 | ±0.01 | ±0.02 | ±0.02 | ±0.005 | ±0.02 | ±0.015 | ±20 | - | -0.032～-0.059 ～ -0.014～-0.028 | 0～-0.030 ～ 0～-0.015 | -0.032～-0.059 ～ -0.014～-0.028 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
[5-12/1mm Unit(s)]
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Brand
-
- OSG (19)
- NS TOOL (9)
- UNION TOOL (8)
- NACHI(FUJIKOSHI) (6)
- KYOWA SEIKO (4)
- GUHRING (3)
- DIJET (2)
- VAN_HOORN (2)
- OKAZAKI SEIKO (1)
- SANDVIK (1)
- THE CUT (1)
- SPEED TIGER (0)
- ATOM (0)
- WATERMILLS (0)
- SANKO MFG (0)
- TAIYO-TOOL (0)
- 7 LEADERS (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.