Rejestracja
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1–3/0.1mm jedn.]
  • Blade length (ℓ)(mm)
    [5–56/1mm jedn.]
  • Number of flutes(sheet)
    • Cermet End Mill (for Bottom Surface Finishing), FX-MCF

        OSG

        Cermet End Mill (for Bottom Surface Finishing), FX-MCF

        End mills dedicated to bottom surface finishing, adopted cermet base metal plus FX coating. Stunning high-speed mirror finish machining.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        6 ~ 80.1General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]0.9 ~ 1.24Radius90 ~ 1006 ~ 89 ~ 12
        Cena standardowa (bez VAT):
        94.84 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • R (Regular)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

        [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ~ 200.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 563Radius60 ~ 1306 ~ 2026 ~ 92
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • HLRS 4-Flute Long-Neck Radius
        • ZNIŻKA

        UNION TOOL

        HLRS 4-Flute Long-Neck Radius

        [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Rigidity-oriented blade shape provides long life even when machining high hardness materials· Capable of stable machining for both dry and wet type· New HARDMAX coating adopted to improve oxidation resistance.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.8 ~ 60.05 ~ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Copper[○]0.48 ~ 4.84Long-Neck Radius50 ~ 1204 ~ 62 ~ 48
        Cena standardowa (bez VAT):
        55.58 €
        Cena standardowa (bez VAT):
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • EPL-HP-4FL, Carbide end mill

          OSG

          EPL-HP-4FL, Carbide end mill

          Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank
          Czytaj dalej
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          ---------
          Cena standardowa (bez VAT):
          42.20 €
          Standardowa data wysyłki:
          4 dni robocze
          Konfiguruj
        • CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730
          • Volume Discount

          SANDVIK

          CoroMill Plura HD, End Mill, Roughing and Finish Milling, Center Cut, 2S342-PA-1730

          [Features]· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.
          Czytaj dalej
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          -0.5 ~ 2General Steel[○] / Cast Iron[○]-4Radius57 ~ 726 ~ 12-
          Cena standardowa (bez VAT):
          111.93 €
          Standardowa data wysyłki:
          8 dni robocze
          Konfiguruj
        • Union Tool Carbide End Mill

            UNION TOOL

            Union Tool Carbide End Mill

            [Features]· Long-neck radius ball-end mill that can cut cemented carbide.· Diamond coating for cemented carbide machining has been developed to achieve outstanding hardness, toughness and adhesive strength.· Phenomenal "deep" cutting has been achieved through adoption of a blade shape optimized for cemented carbide.· Achieves tear-free, excellent machined surfaces, especially from medium rough to finish machining.
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            ---0.752Long-Neck Radius504-
            Cena standardowa (bez VAT):
            172.18 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
            • Volume Discount
            • TS
            • High-Hardness Steel
            • 4 Flutes
            • S (Short)

            MISUMI

            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

            [Features] -Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            4 ~ 120.813 ~ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ~ 244High-Feed Radius80 ~ 1606 ~ 1235 ~ 108
            Cena standardowa (bez VAT):
            96.97 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • XAL series carbide radius end mill, 4-flute, 45° torsion / regular model
            • Volume Discount
            • XAL
            • General Steel
            • 4 Flutes

            MISUMI

            XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

            4-Flute Radius for High-Efficiency and High-Speed Machining
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            4 ~ 120.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]18 ~ 384Radius60 ~ 1006 ~ 12-
            Cena standardowa (bez VAT):
            23.73 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • XAL series carbide radius end mill, 2-flute / short model
            • Volume Discount
            • XAL
            • General Steel
            • 2 Flutes

            MISUMI

            XAL series carbide radius end mill, 2-flute / short model

            Radius end mills are available at low prices
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            1 ~ 120.1 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3 ~ 302Radius50 ~ 754 ~ 12-
            Cena standardowa (bez VAT):
            14.52 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
            • Volume Discount
            • Non-Coated
            • Aluminum
            • 3 Flutes

            MISUMI

            Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

            Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            5 ~ 220.5 ~ 2Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]9 ~ 333Radius80 ~ 2004 ~ 20-
            Cena standardowa (bez VAT):
            109.63 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
            • Non-Coated
            • General Steel

            MISUMI

            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

            [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            1 ~ 200.1 ~ 3General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 602 ~ 4Radius40 ~ 1254 ~ 20-
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

              OSG

              New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

              An end-mill with a concept of ultra high speed processing of aluminum alloys. Suitable for high efficiency processing of large size aluminum parts for air craft.
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              12 ~ 251 ~ 3Aluminum[◎]14 ~ 272Radius90 ~ 11012 ~ 2540 ~ 56
              Cena standardowa (bez VAT):
              233.00 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Powerful Type Multi-Function FXS-PKE
              • Volume Discount

              OSG

              Powerful Type Multi-Function FXS-PKE

              In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              3 ~ 200.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]5 ~ 304Radius60 ~ 1606 ~ 209 ~ 60
              Cena standardowa (bez VAT):
              95.20 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • HLRS2000 HM Coated 2 Flute Long-Neck Radius
              • ZNIŻKA
              • Volume Discount

              UNION TOOL

              HLRS2000 HM Coated 2 Flute Long-Neck Radius

              [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              0.4 ~ 60.05 ~ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.4 ~ 62Long-Neck Radius50 ~ 1204 ~ 61 ~ 60
              Cena standardowa (bez VAT):
              43.45 €
              Cena standardowa (bez VAT):
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • CRRS UT Coated 4-Flute Radius
              • ZNIŻKA
              • Volume Discount

              UNION TOOL

              CRRS UT Coated 4-Flute Radius

              [Features]· Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              2 ~ 120.3 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]2 ~ 124Long-Neck Radius60 ~ 1204 ~ 126 ~ 36
              Cena standardowa (bez VAT):
              85.32 €
              Cena standardowa (bez VAT):
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • SSR200 CBN Super Speed Radius End Mill

                NS TOOL

                SSR200 CBN Super Speed Radius End Mill

                Achieves high-efficiency machining of corner radius due to outstanding CBN durability
                Czytaj dalej
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                0.2 ~ 20.02 ~ 0.5General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.08 ~ 1.22Radius48 ~ 5340.5 ~ 10
                Cena standardowa (bez VAT):
                126.93 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Square End Mill, Regular, 4-Flute Corner R 3562
                • Volume Discount

                GUHRING

                Square End Mill, Regular, 4-Flute Corner R 3562

                [Features]· Ideal for corner rounding of molds and machine parts.
                Czytaj dalej
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                6 ~ 20---4Radius57 ~ 1046 ~ 20-
                Cena standardowa (bez VAT):
                84.67 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
                • Volume Discount

                SANDVIK

                CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

                Unique shape exhibits high performance
                Czytaj dalej
                Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                2 ~ 160.2 ~ 3General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]2 ~ 162 ~ 4Radius / Long-Neck Radius57 ~ 1506 ~ 164 ~ 42
                Cena standardowa (bez VAT):
                105.98 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • HYP-CR-HI-WEMS, Carbide end mill

                  OSG

                  HYP-CR-HI-WEMS, Carbide end mill

                  Carbide end mill - For general applications - 4 flutes, variable helix and unequal spacing, corner radius - Weldon shank
                  Czytaj dalej
                  Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                  ---------
                  Cena standardowa (bez VAT):
                  45.10 €
                  Standardowa data wysyłki:
                  4 dni robocze
                  Konfiguruj
                • HYP-HS-CRE , Carbide end mill

                    OSG

                    HYP-HS-CRE , Carbide end mill

                    Carbide end mill - For hard materials and cast iron - 4 flutes, super radius
                    Czytaj dalej
                    Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                    ---------
                    Cena standardowa (bez VAT):
                    71.70 €
                    Standardowa data wysyłki:
                    4 dni robocze
                    Konfiguruj
                  • DG-CPR, Carbide end mills with diamond coating

                      OSG

                      DG-CPR, Carbide end mills with diamond coating

                      Carbide end mills with diamond coating - For graphite milling - Multiflute, long neck for deep reach, corner radius
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      ---------
                      Cena standardowa (bez VAT):
                      121.60 €
                      Standardowa data wysyłki:
                      4 dni robocze
                      Konfiguruj
                    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 3 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                      Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      4 ~ 120.813 ~ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ~ 243High-Feed Radius50 ~ 1006 ~ 12-
                      Cena standardowa (bez VAT):
                      122.52 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      4 ~ 200.813 ~ 2.607General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ~ 404High-Feed Radius50 ~ 1506 ~ 20-
                      Cena standardowa (bez VAT):
                      116.38 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 3 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

                      [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      4 ~ 120.813 ~ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ~ 243High-Feed Radius80 ~ 1606 ~ 1235 ~ 108
                      Cena standardowa (bez VAT):
                      93.37 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute / stub model

                      A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 60.2 ~ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 94Radius506-
                      Cena standardowa (bez VAT):
                      59.74 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
                      • Volume Discount
                      • XAL
                      • General Steel
                      • 3 Flutes

                      MISUMI

                      XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                      3-flute 45° helix radius that's resistant to chattering is available at an affordable price
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]16 ~ 383Radius60 ~ 1006 ~ 12-
                      Cena standardowa (bez VAT):
                      23.73 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • XAL series carbide radius end mill, 4-flute / short model
                      • Volume Discount
                      • XAL
                      • General Steel
                      • 4 Flutes

                      MISUMI

                      XAL series carbide radius end mill, 4-flute / short model

                      The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 200.1 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]8 ~ 384Radius50 ~ 1004 ~ 20-
                      Cena standardowa (bez VAT):
                      18.89 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 3 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 120.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ~ 123High-Feed Radius50 ~ 1004 ~ 12-
                      Cena standardowa (bez VAT):
                      87.94 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 3 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 120.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ~ 243High-Feed Radius50 ~ 1004 ~ 12-
                      Cena standardowa (bez VAT):
                      83.28 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 4 Flutes

                      MISUMI

                      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                      [Features] -High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.75 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]1.2 ~ 54High-Feed Radius60 ~ 1106 ~ 127.5 ~ 24
                      Cena standardowa (bez VAT):
                      64.07 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-purpose for engraving, side face, rough and medium finishing-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 120.5 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ~ 124High-Feed Radius50 ~ 1004 ~ 12-
                      Cena standardowa (bez VAT):
                      56.61 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                      [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Variable design that can be used for engraving, side faces, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 200.5 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ~ 404High-Feed Radius50 ~ 1304 ~ 20-
                      Cena standardowa (bez VAT):
                      77.71 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model
                      • Volume Discount
                      • TS
                      • High-Hardness Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                      Long neck type with interference prevention can be selected from a number of effective lengths
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      4 ~ 161 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]6 ~ 244Long-Neck Radius70 ~ 1804 ~ 16-
                      Cena standardowa (bez VAT):
                      92.43 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                      [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.3 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 183Radius40 ~ 656 ~ 12-
                      Cena standardowa (bez VAT):
                      76.51 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                      [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.3 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 184Radius40 ~ 656 ~ 12-
                      Cena standardowa (bez VAT):
                      82.35 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

                      [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.5 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 183Radius60 ~ 1006 ~ 1214 ~ 68
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 3 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                      [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.3 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 263Radius60 ~ 1006 ~ 1218 ~ 70
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                      [Features] -Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter-Long shank is ideal for milling deep cavities-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 220.2 ~ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 304Radius80 ~ 2006 ~ 2010 ~ 18
                      Cena standardowa (bez VAT):
                      76.72 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute, 45° spiral / stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

                      [Features] -Radius end mill-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 120.5 ~ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ~ 184Radius60 ~ 1006 ~ 1214 ~ 68
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute, 45° spiral / short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute, 45° spiral / short model

                      [Features] -Multi-function end mill with radius-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 200.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 384Radius60 ~ 1106 ~ 2018 ~ 73
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 4-flute, 45°, regular model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 4 Flutes
                      • R (Regular)

                      MISUMI

                      TSC series carbide radius end mill, 4-flute, 45°, regular model

                      [Features] -Radius multi-function cutter-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      3 ~ 200.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 564Radius60 ~ 1306 ~ 2026 ~ 92
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 2-flute stub model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, 2-flute stub model

                      [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      2 ~ 120.2 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 182Radius35 ~ 604 ~ 12-
                      Cena standardowa (bez VAT):
                      34.89 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • B (Stub)

                      MISUMI

                      TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 120.1 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ~ 182Radius40 ~ 754 ~ 1214 ~ 45
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 2-flute / short model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • S (Short)

                      MISUMI

                      TSC series carbide radius end mill, 2-flute / short model

                      [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 200.1 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 402Radius40 ~ 1104 ~ 2017 ~ 45
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • TSC series carbide radius end mill, 2-flute / regular model
                      • Volume Discount
                      • TS
                      • General Steel
                      • 2 Flutes
                      • R (Regular)

                      MISUMI

                      TSC series carbide radius end mill, 2-flute / regular model

                      [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                      Czytaj dalej
                      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
                      1 ~ 200.1 ~ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 602Radius45 ~ 1254 ~ 2023 ~ 55
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj