Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Kategoria
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
  • Number of flutes(sheet)
  • Coating
  • Producent

    • Long Neck Ball End Mills (Carbide)

      Liczba pozycji: 66
      * Informacje o dniach wysyłki, kosztach wysyłki i cenach.
      Lista
      Zdjęcie
      Porównaj specyfikacje
    • 1
    • 2
    • Dalej
      • HM Coated 2-Flute, Long Neck Ball HSLB
        • ZNIŻKA
        • Volume Discount
        • Stock

        UNION TOOL

        HM Coated 2-Flute, Long Neck Ball HSLB

        [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
        Czytaj dalej
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        0.05 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.08 ～ 4.82For High Hardness (Silicon Group)45 ～ 1200.3 ～ 603 ～ 6
        Cena (bez VAT) od:
        28.03 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • 2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

          UNION TOOL

          2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

          [Features] · Can be used for machining at short overhang lengths.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.16 ～ 4.82-35 ～ 500.5 ～ 204 ～ 6
          Cena (bez VAT) od:
          44.94 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • TSC series carbide long neck ball end mill, 2-flute / long neck model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes

          MISUMI

          TSC series carbide long neck ball end mill, 2-flute / long neck model

          [Features] -Long neck shape suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.07 ～ 82For High Hardness (Silicon Group)40 ～ 1100.2 ～ 603 ～ 8
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • HSB, HM Coated 2-Flute Ball
          • ZNIŻKA
          • Volume Discount
          • Stock

          UNION TOOL

          HSB, HM Coated 2-Flute Ball

          [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.03 ～ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]0.06 ～ 222For High Hardness (Silicon Group)50 ～ 110-4 ～ 12
          Cena (bez VAT) od:
          37.04 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • 2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
          • ZNIŻKA
          • Volume Discount

          OSG

          2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

          Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.08 ～ 62For General Steels (AlCrN, etc.)45 ～ 1200.3 ～ 503 ～ 6
          Cena (bez VAT) od:
          49.20 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Carbide Solid Spherical Cutter, 2-Flute
          • Volume Discount

          EIKOSHA

          Carbide Solid Spherical Cutter, 2-Flute

          Copying Back / Curved Surface Deburring
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 10Spherical Ball--2-70 ～ 1004 ～ 424 ～ 16
          Cena (bez VAT) od:
          102.47 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes

          MISUMI

          TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

          [Features] -High feed, high rigidity 3-spiral taper shape with taper length-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 3Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 63For High Hardness (Silicon Group)50 ～ 1107 ～ 604 ～ 8
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
          • Volume Discount
          • DIA
          • Graphite
          • 2 Flutes

          MISUMI

          Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

          Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ～ 3Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]0.6 ～ 7.52Dia Coat50 ～ 1102 ～ 604 ～ 6
          Cena (bez VAT) od:
          87.71 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • HTNB HM Coated High-Precision Taper Neck Ball
          • ZNIŻKA

          UNION TOOL

          HTNB HM Coated High-Precision Taper Neck Ball

          [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.1 ～ 2Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.16 ～ 3.22For High Hardness (Silicon Group)50 ～ 1201.5 ～ 624 ～ 6
          Cena (bez VAT) od:
          69.30 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
          • Volume Discount

          NS TOOL

          DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)

          [Features] Long shank cutter with 2 cutting edges.[Features] Suitable for machining aluminium alloys, copper and resins.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 3Long-Neck BallAluminum[◎] / Copper[◎] / Resin[◎]1.5 ～ 92Non-Coated50 ～ 1104 ～ 504 ～ 8
          Cena (bez VAT) od:
          91.81 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
          • ZNIŻKA
          • Volume Discount

          NS TOOL

          MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

          Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.07 ～ 62TiAlN45 ～ 1200.3 ～ 504 ～ 6
          Cena (bez VAT) od:
          30.38 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • UT COAT 2-Flute Long-Neck Ball CSLEB
          • ZNIŻKA

          UNION TOOL

          UT COAT 2-Flute Long-Neck Ball CSLEB

          [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]0.08 ～ 4.82TiCN45 ～ 1200.3 ～ 603 ～ 6
          Cena (bez VAT) od:
          45.25 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

          A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 5Long-Neck Ball / Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-2For High Hardness (Silicon Group)70 ～ 904 ～ 556 ～ 10
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes

          MISUMI

          TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

          [Features] -High rigidity, 2 flute type with longitudinal taper-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.15 ～ 5Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.3 ～ 82For High Hardness (Silicon Group)50 ～ 1101.5 ～ 604 ～ 12
          Cena (bez VAT) od:
          33.49 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • TSC series carbide long neck ball end mill, 3-flute / long neck model
          • Volume Discount
          • TS
          • General Steel
          • 3 Flutes

          MISUMI

          TSC series carbide long neck ball end mill, 3-flute / long neck model

          [Features] -Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 4.82 ～ 3For High Hardness (Silicon Group)50 ～ 1103 ～ 504 ～ 6
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • TSC series carbide long neck ball end mill, 4-flute / long neck model
          • Volume Discount
          • TS
          • General Steel
          • 4 Flutes

          MISUMI

          TSC series carbide long neck ball end mill, 4-flute / long neck model

          [Features] -Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          1 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.6 ～ 64For High Hardness (Silicon Group)50 ～ 704 ～ 304 ～ 6
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
          • Volume Discount
          • TS
          • High-Hardness Steel
          • 3 Flutes

          MISUMI

          TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

          [Features] The shape with 3 flutes and short flute length prevents chatter and enables high feed machiningThe tapered neck effectively suppresses chatterMachining of high hardness steel up to 65HRC is possibleThe coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.5 ～ 3Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.8 ～ 4.83For High Hardness (Silicon Group)70 ～ 11020 ～ 504 ～ 8
          Cena (bez VAT) od:
          74.53 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model
          • Volume Discount
          • CrN
          • Copper
          • 2 Flutes

          MISUMI

          CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

          CrN coated products that are ideal for copper electrode processing are available at affordable prices
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ～ 2Long-Neck BallAluminum[○] / Copper[◎] / Graphite[○] / Resin[○]0.4 ～ 42CrN50 ～ 1102 ～ 404 ～ 6
          Cena (bez VAT) od:
          33.74 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
          • Volume Discount
          • XAL
          • General Steel
          • 2 Flutes

          MISUMI

          XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

          A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.07 ～ 62For General Steels (AlCrN, etc.)50 ～ 1100.2 ～ 603 ～ 6
          Cena (bez VAT) od:
          17.09 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
          • Volume Discount
          • MR
          • General Steel
          • 2 Flutes
          • S (Short)

          MISUMI

          MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

          High-performance MRC series is available in the industry's largest number of sizes
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.05 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]0.07 ～ 62MRC50 ～ 1100.2 ～ 604 ～ 6
          Cena (bez VAT) od:
          20.69 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Long Neck for Copper Work, Ball CURIBR
          • Volume Discount

          NACHI(FUJIKOSHI)

          Long Neck for Copper Work, Ball CURIBR

          Well suited for detailed machining on copper electrodes. A variety of size alignment allows for multiple types of machining.
          Czytaj dalej
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.2 ～ 1.5Long-Neck BallAluminum[◎] / Copper[◎]0.4 ～ 2.52CrN45 ～ 801.5 ～ 354 ～ 6
          Cena (bez VAT) od:
          86.20 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • 2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD

            OSG

            2-Flute, Long Neck for Plus Check, Ball End,CRN-LN-EBD

            Ideal for copper electrode machining if large overhang is required due to short blade with high rigidity and long neck shape.
            Czytaj dalej
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.5 ～ 2.5Long-Neck BallAluminum[○] / Copper[◎] / Resin[○]1.5 ～ 7.52CrN60 ～ 903 ～ 406
            Cena (bez VAT) od:
            84.00 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Long Neck Ball End for 2-Flute Graphite
            • Volume Discount

            OSG

            Long Neck Ball End for 2-Flute Graphite

            Diamond Coating End-mill for Graphite Processing
            Czytaj dalej
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.2 ～ 2Long-Neck BallAluminum[○] / Graphite[◎] / Resin[◎]0.6 ～ 62DG50 ～ 1004 ～ 604
            Cena (bez VAT) od:
            107.25 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • 2-Flute Long Neck, Ball End CBN-LN-SXB

              OSG

              2-Flute Long Neck, Ball End CBN-LN-SXB

              2-Flute Long Neck Ball End Type CBN-LN-SXB-Achieves deep cut milling even with small diameters. Good cutting quality.With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.-CBN sintered body is used for flute material.
              Czytaj dalej
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.2 ～ 1.5Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.3 ～ 1.82Non-Coated45 ～ 502 ～ 154 ～ 6
              Cena (bez VAT) od:
              110.50 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 2-Flute Long Neck, Ball End CRN-LN-EBD-4
              • Volume Discount

              OSG

              2-Flute Long Neck, Ball End CRN-LN-EBD-4

              In addition to the conventional film properties, achieves coating having a very high oxidizing, high-speed processing.
              Czytaj dalej
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.1 ～ 1Long-Neck BallAluminum[○] / Copper[◎] / Resin[○]0.16 ～ 1.62CrN45 ～ 701 ～ 304
              Cena (bez VAT) od:
              64.79 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 2-Flute Long Neck, Ball End DLC-LN-EBD
              • Volume Discount

              OSG

              2-Flute Long Neck, Ball End DLC-LN-EBD

              Ultra-smooth DLC coating prevents welding. It is possible to achieve high-speed in the shape processing such as aluminum alloy, and good surface finishing can also be obtained.
              Czytaj dalej
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ～ 2Long-Neck BallAluminum[◎] / Resin[◎]1.5 ～ 62DLC60 ～ 805 ～ 206
              Cena (bez VAT) od:
              82.63 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                OSG

                2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions
                Czytaj dalej
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.3 ～ 1.5Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.5 ～ 2.42For General Steels (AlCrN, etc.)35 ～ 401.5 ～ 124
                Cena (bez VAT) od:
                20.02 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • 2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6
                • Volume Discount

                OSG

                2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

                High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.
                Czytaj dalej
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.25 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.5 ～ 62TiAlN60 ～ 902.5 ～ 306
                Cena (bez VAT) od:
                88.82 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • 2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD
                • ZNIŻKA
                • Volume Discount

                OSG

                2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

                Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.
                Czytaj dalej
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                0.1 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]0.16 ～ 4.82For High Hardness (Silicon Group)45 ～ 900.5 ～ 404 ～ 6
                Cena (bez VAT) od:
                57.40 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • 2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                  OSG

                  2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                  Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.
                  Czytaj dalej
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  0.1 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.16 ～ 4.82TiAlN45 ～ 1200.5 ～ 504 ～ 6
                  Cena (bez VAT) od:
                  35.60 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM

                    OSG

                    Long Neck for 4-Flute Graphite, Ball Cord DG-LN-EBM

                    Diamond Coating End-mill for Graphite Processing
                    Czytaj dalej
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    1 ～ 1.5Long-Neck BallAluminum[◎] / Graphite[◎] / Resin[◎]3 ～ 4.54DG50 ～ 6010 ～ 204
                    Cena (bez VAT) od:
                    107.25 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD

                      OSG

                      DIA Coated 2-Flute Long Neck, Ball End Mill DIA-LN-EBD

                      Ball end mill of the long neck shape that has been subjected to ultra-fine crystal diamond coating. Outstanding endurance in the graphite processing. Copper, is also effective in the aluminum alloy.
                      Czytaj dalej
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.5 ～ 2.5Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]1.5 ～ 7.52Dia Coat60 ～ 1005 ～ 506
                      Cena (bez VAT) od:
                      156.54 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
                      • Volume Discount

                      UNION TOOL

                      HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

                      [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
                      Czytaj dalej
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      0.1 ～ 0.75BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.3 ～ 2.52For High Hardness (Silicon Group)50-4
                      Cena (bez VAT) od:
                      43.34 €
                      Standardowa data wysyłki:
                      8 dni robocze
                      Konfiguruj
                    • HBL, HM Coated 2-Flute Long Shank Ball

                        UNION TOOL

                        HBL, HM Coated 2-Flute Long Shank Ball

                        [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
                        Czytaj dalej
                        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                        1.5 ～ 6BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]4.5 ～ 252For High Hardness (Silicon Group)80 ～ 200-3 ～ 12
                        Cena (bez VAT) od:
                        110.99 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • HLB, HM Coated 2-Flute Long Neck Ball

                          UNION TOOL

                          HLB, HM Coated 2-Flute Long Neck Ball

                          [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
                          Czytaj dalej
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.4 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.64 ～ 4.82For High Hardness (Silicon Group)45 ～ 803 ～ 304 ～ 6
                          Cena (bez VAT) od:
                          48.19 €
                          Standardowa data wysyłki:
                          7 dni robocze
                          Konfiguruj
                        • DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                            UNION TOOL

                            DCB 2-Flute Diamond-Coated Ball for Graphite Processing

                            [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                            Czytaj dalej
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.5 ～ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]5 ～ 552Dia Coat60 ～ 180-4 ～ 12
                            Cena (bez VAT) od:
                            277.34 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
                            • ZNIŻKA

                            UNION TOOL

                            DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing

                            [Features]· 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing· The newly developed diamond coating film achieves outstanding wear resistance· Adopts a highly adhesive coating film for longer product life
                            Czytaj dalej
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.2 ～ 3Long-Neck BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.32 ～ 62Dia Coat45 ～ 1202 ～ 804 ～ 6
                            Cena (bez VAT) od:
                            105.36 €
                            Cena specjalna
                            Standardowa data wysyłki:
                            Towar dostępny w magazynie: 1 dzień roboczy
                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                            Konfiguruj
                          • CGB2000 2-Flute Ball for Graphite Processing

                              UNION TOOL

                              CGB2000 2-Flute Ball for Graphite Processing

                              [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
                              Czytaj dalej
                              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                              0.2 ～ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]0.8 ～ 552Non-Coated60 ～ 200-4 ～ 12
                              Cena (bez VAT) od:
                              115.16 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • CGB4000 4-Flute Ball for Graphite Processing

                                UNION TOOL

                                CGB4000 4-Flute Ball for Graphite Processing

                                [Features]· An end mill dedicated for graphite machining.· Adopts a carbide base material with excellent wear resistance.
                                Czytaj dalej
                                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                2 ～ 10BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]20 ～ 604Non-Coated100 ～ 250-4 ～ 20
                                Cena (bez VAT) od:
                                228.98 €
                                Standardowa data wysyłki:
                                7 dni robocze
                                Konfiguruj
                              • CPRB for Resin Processing, 2-Flute Long Neck Ball

                                  UNION TOOL

                                  CPRB for Resin Processing, 2-Flute Long Neck Ball

                                  [Features]· Long Neck Ball End Mill for Resin Processing· Ideal for deep grooving thanks to the undercut processing of the neck part
                                  Czytaj dalej
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.2 ～ 3Long-Neck BallAluminum[○] / Copper[◎] / Resin[◎]0.4 ～ 62Non-Coated45 ～ 1201 ～ 504 ～ 6
                                  Cena (bez VAT) od:
                                  72.74 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • SSBL200 CBN Super Speed Long Neck Ball End Mill

                                    NS TOOL

                                    SSBL200 CBN Super Speed Long Neck Ball End Mill

                                    Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools
                                    Czytaj dalej
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.05 ～ 1Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.08 ～ 1.22Non-Coated50 ～ 530.3 ～ 104
                                    Cena (bez VAT) od:
                                    160.24 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • MRBH230 Long-Neck Ball, Hard (for High Hardness)
                                    • ZNIŻKA
                                    • Volume Discount
                                    • Stock

                                    NS TOOL

                                    MRBH230 Long-Neck Ball, Hard (for High Hardness)

                                    The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface
                                    Czytaj dalej
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]0.07 ～ 62For High Hardness (Silicon Group)45 ～ 1200.2 ～ 504 ～ 6
                                    Cena (bez VAT) od:
                                    31.29 €
                                    Cena specjalna
                                    Standardowa data wysyłki:
                                    Towar dostępny w magazynie: 1 dzień roboczy
                                    Niektóre pozycje mogą zostać wysłane tego samego dnia
                                    Konfiguruj
                                  • RSB230 Ball-End Mill for Resin Clear Cut
                                    • Volume Discount

                                    NS TOOL

                                    RSB230 Ball-End Mill for Resin Clear Cut

                                    3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.
                                    Czytaj dalej
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.1 ～ 3Long-Neck BallAluminum[◎] / Copper[◎] / Resin[◎]0.6 ～ 302Non-Coated50 ～ 1302 ～ 803 ～ 6
                                    Cena (bez VAT) od:
                                    40.48 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
                                    • ZNIŻKA
                                    • Volume Discount

                                    NS TOOL

                                    MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)

                                    Long Neck Ball End Mill for Short Shank Type (supports shrink fit)
                                    Czytaj dalej
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.1 ～ 1.5Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ～ 2.52TiAlN35 ～ 500.5 ～ 204
                                    Cena (bez VAT) od:
                                    34.97 €
                                    Cena specjalna
                                    Standardowa data wysyłki:
                                    Towar dostępny w magazynie: 1 dzień roboczy
                                    Niektóre pozycje mogą zostać wysłane tego samego dnia
                                    Konfiguruj
                                  • MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
                                    • Volume Discount

                                    NS TOOL

                                    MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill

                                    The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products
                                    Czytaj dalej
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.1 ～ 2Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ～ 42TiAlN50 ～ 1101 ～ 604 ～ 8
                                    Cena (bez VAT) od:
                                    50.56 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                • 1
                                • 2
                                • Dalej

                                  • Ostatnio oglądane produkty

                                  Kategorie związane z Long Neck Ball End Mills (Carbide)