Carbide Ball End Mills
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
MCD Diamond Tip Ball 2 Flutes
VAN_HOORN
[Features]
· The cutting edge is a diamond tip. The tool service life is 2 to 5 times that of PCD and 10 to 20 times that of diamond coated.
· Ideal for machining graphite and composite materials such as CFRP, etc. Provides a beautiful aluminum finish too.
· European-made high quality for peace of mind.Configure nowStarting from∗ ： 1,213.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MSBH345 3-Flute Ball-End Mill for High-Hardness
NS TOOL
Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution- Volume Discount
Configure nowStarting from∗ ： 96.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 513.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
HSB, HM Coated 2-Flute Ball
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
- Stock
Configure nowStarting from∗ ： 37.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Single Cut Ball 70 End Mill DH-OCHB Type
DIJET
[Features]
· One mill for roughing to finishing high-hardness material.
· 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
· Reduces chattering by using high tool rigidity and unequal divisions.
· Implements good cutting performance with low resistance, with a torsion angle of 45°.- Volume Discount
Configure nowStarting from∗ ： 105.49 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
XAL series carbide ball end mill, 2-flute / short model
MISUMI
XAL Series is the definitive choice for cost-sensitive customers- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 13.95 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.- Volume Discount
Configure nowStarting from∗ ： 42.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
NS TOOL
[Features]
Long shank cutter with 2 cutting edges.
[Features]
Suitable for machining aluminium alloys, copper and resins.- Volume Discount
Configure nowStarting from∗ ： 95.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
Long Neck Ball End Mill for Short Shank Type (supports shrink fit)- Volume Discount
Configure nowStarting from∗ ： 36.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds- Volume Discount
Configure nowStarting from∗ ： 31.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
HM Coated 2-Flute, Long Neck Ball HSLB
UNION TOOL
[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection- Volume Discount
- Stock
Configure nowStarting from∗ ： 28.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 103.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
MISUMI
[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 64.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
MISUMI
The user friendly regular flute length type is released simultaneously- Volume Discount
- MR
- General Steel
- 2 Flutes
- R (Regular)
Configure nowStarting from∗ ： 22.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-Flute, Ball End, FX-MG-EBD
OSG
Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.- Volume Discount
Configure nowStarting from∗ ： 91.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD
OSG
[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications- Volume Discount
Configure nowStarting from∗ ： 63.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT
OSG
Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.Configure nowStarting from∗ ： 83.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spherical Ball End FXS-EQD
OSG
Spherical cutting edge prevent chattering in the machining of standing wall. Machining undercut enabled.- Volume Discount
Configure nowStarting from∗ ： 121.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
OSG
Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.- Volume Discount
Configure nowStarting from∗ ： 49.20 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
MSB345 3-Flute Ball-End Mill
NS TOOL
Enables efficient machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution- Volume Discount
Configure nowStarting from∗ ： 71.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SSB200 CBN Super Speed Ball End Mill
NS TOOL
High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of useConfigure nowStarting from∗ ： 160.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MRBTN230 MUGEN-COATING Long Tapered Neck Ball End Mill
NS TOOL
The lower part of the neck is tapered to improve tool rigidity. The cutting depth can be set larger than conventional products- Volume Discount
Configure nowStarting from∗ ： 52.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type
EIKOSHA
Graphite Electrode Processing- Volume Discount
Configure nowStarting from∗ ： 110.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Solid Ball End Mill SBEL
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.- Volume Discount
Configure nowStarting from∗ ： 107.03 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Diamond Coated Ball End Mill, 4-Flute, Type-N 6725
GUHRING
Diamond coated endmill suitable for graphite or plastic.- Volume Discount
Configure nowStarting from∗ ： 127.51 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 225.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SSPB220 CBN Super Spiral Ball End Mill
NS TOOL
[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°Configure nowStarting from∗ ： 172.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 105.69 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 160.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TSC series carbide ball end mill (R accuracy ±3μm)
MISUMI
[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
MISUMI
[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowStarting from∗ ： 24.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide ball end mill, 2-flute / short model
MISUMI
[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 23.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 44.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, short model
MISUMI
[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, regular model
MISUMI
[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 3-flute / short model
MISUMI
[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 3-flute / regular model
MISUMI
[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, short model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 4-flute / regular model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
Carbide ball end mill, 2-flute / short model
MISUMI
Highly versatile due to the non-coated specification- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
-High rigidity, 2 flute type with longitudinal taper
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 34.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| R Size(mm) |
| Type |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| R Precision(μm) |
| Machining Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | VAN_HOORN | NS TOOL | SANDVIK | UNION TOOL | SANDVIK | DIJET | MISUMI | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | EIKOSHA | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | NS TOOL | NS TOOL | NS TOOL | EIKOSHA | DIJET | GUHRING | EIKOSHA | NS TOOL | SANDVIK | SANDVIK | SANDVIK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib) | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model | 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT | Carbide Graphite Solid Tapered Ball End Mill with 4 Flutes Long Type GBEL4 | CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less) | Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63) | TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model | XAC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | |||||||||||||||||||||||||||||||
| Starting from∗ | 1,213.84 € *Unit price with basic configuration | 96.47 € *Unit price with basic configuration Volume Discount | 513.00 € *Unit price with basic configuration | 37.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | - | 105.49 € *Unit price with basic configuration Volume Discount | 13.95 € *Unit price with basic configuration Volume Discount | 42.09 € *Unit price with basic configuration Volume Discount | 95.50 € *Unit price with basic configuration Volume Discount | 36.37 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 31.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 28.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 103.57 € *Unit price with basic configuration Volume Discount | 64.20 € *Unit price with basic configuration Volume Discount | 22.05 € *Unit price with basic configuration Volume Discount | 91.40 € *Unit price with basic configuration Volume Discount | 63.80 € *Unit price with basic configuration Volume Discount | 83.42 € *Unit price with basic configuration | 121.20 € *Unit price with basic configuration Volume Discount | 49.20 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 71.66 € *Unit price with basic configuration Volume Discount | 160.01 € *Unit price with basic configuration | 52.58 € *Unit price with basic configuration Volume Discount | 110.27 € *Unit price with basic configuration Volume Discount | 107.03 € *Unit price with basic configuration Volume Discount | 127.51 € *Unit price with basic configuration Volume Discount | 225.74 € *Unit price with basic configuration Volume Discount | 172.90 € *Unit price with basic configuration | 116.51 € *Unit price with basic configuration Volume Discount | 105.69 € *Unit price with basic configuration Volume Discount | 160.55 € *Unit price with basic configuration Volume Discount | 46.74 € *Unit price with basic configuration Volume Discount | 24.07 € *Unit price with basic configuration Volume Discount | 23.03 € *Unit price with basic configuration Volume Discount | 44.96 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 34.83 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 6 Days | 5 Days | Same day | 5 Days | 6 Days | 5 Days | 6 Days | 6 Days | Same day | Same day | Same day | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 24 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||
| R Size(mm) | 6 | 0.5 ～ 3 | - | 0.03 ～ 6 | - | - | 0.05 ～ 10 | 0.1 ～ 3 | 0.5 ～ 3 | 0.1 ～ 1.5 | 0.05 ～ 3 | 0.05 ～ 3 | 0.4 ～ 20 | 0.3 ～ 2 | 0.2 ～ 8 | 0.5 ～ 15 | 0.1 ～ 6 | 0.5 ～ 6 | 0.5 ～ 6 | 0.05 ～ 3 | 0.5 ～ 6 | 0.1 ～ 1 | 0.1 ～ 2 | 0.5 ～ 15 | 0.5 ～ 15 | - | 1.5 ～ 15 | 0.1 ～ 3 | 1 ～ 8 | 2 ～ 10 | 0.5 ～ 8 | 1.5 ～ 3 | 0.2 ～ 6 | 0.2 ～ 12.5 | 2 ～ 8 | 0.05 ～ 10 | 0.2 ～ 8 | 0.5 ～ 12.5 | 0.5 ～ 5 | 0.5 ～ 10 | 1 ～ 6 | 1 ～ 10 | 1.5 ～ 6 | 0.2 ～ 10 | 0.15 ～ 5 |
| Type | Ball | Ball | - | Ball | - | Ball | Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Ball | Spherical Ball | Long-Neck Ball | Ball | Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball / Spherical Ball | Ball | Ball | Ball | Ball | Ball | Tapered neck ball |
| work material | Aluminum[◎] / Graphite[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○] | - | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | - | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Graphite[◎] | General Steel[○] / Quenched and tempered steel[○] / Graphite[○] | - | Aluminum[◎] / Copper[◎] / Graphite[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | Aluminum[○] / Copper[○] | General Steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Blade length (ℓ)(mm) | 12 | 1.5 ～ 10 | 7.874 ～ 45.49 | 0.06 ～ 22 | 1.19 ～ 4.8 | 7.5 ～ 9 | 0.2 ～ 38 | 0.6 ～ 30 | 1.5 ～ 9 | 0.15 ～ 2.5 | 0.07 ～ 6 | 0.08 ～ 4.8 | 3 ～ 70 | 0.6 ～ 4 | 1.5 ～ 30 | 2.5 ～ 55 | 0.16 ～ 12 | 1.5 ～ 18 | 0.7 ～ 8.1 | 0.08 ～ 6 | 1.5 ～ 20 | 0.15 ～ 1.2 | 0.2 ～ 4 | 8 ～ 60 | 5 ～ 80 | - | 30 ～ 80 | 0.15 ～ 3.6 | 6 ～ 26 | 11 ～ 38 | 2 ～ 15 | 4.5 ～ 9 | 0.4 ～ 12 | 0.8 ～ 50 | 8 ～ 30 | 0.2 ～ 25 | 1.5 ～ 30 | 2 ～ 30 | - | 2 ～ 25 | 5 ～ 22 | 3 ～ 25 | 5 ～ 22 | 0.8 ～ 25 | 0.3 ～ 8 |
| Number of flutes(sheet) | 2 | 3 | - | 2 | - | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | 3 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 2 ～ 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 4 | 4 | 2 | 2 |
| Coating | Non-Coated | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | - | Other | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | TiAlN | TiAlN | For High Hardness (Silicon Group) | - | For High Hardness (Silicon Group) | MRC | TiAlN | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | TiAlN | For General Steels (AlCrN, etc.) | TiAlN | Non-Coated | TiAlN | - | Non-Coated | Dia Coat | - | Non-Coated | Other | Other | Other | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) |
| Overall Length (L)(mm) | 78 | 60 ～ 80 | 20 ～ 50 | 50 ～ 110 | - | - | 40 ～ 160 | 50 ～ 130 | 50 ～ 110 | 35 ～ 50 | 45 ～ 120 | 45 ～ 120 | 45 ～ 180 | 40 | 50 ～ 140 | 50 ～ 180 | 45 ～ 160 | 60 ～ 220 | 60 ～ 110 | 45 ～ 120 | 60 ～ 120 | 52 ～ 53 | 50 ～ 110 | 60 ～ 180 | 45 ～ 150 | 75 ～ 150 | 120 ～ 250 | 50 ～ 70 | 60 ～ 100 | 80 ～ 125 | 75 ～ 150 | 60 ～ 90 | 40 ～ 65 | 40 ～ 180 | 100 ～ 250 | 40 ～ 150 | 50 ～ 140 | 70 ～ 280 | 70 ～ 90 | 50 ～ 150 | 50 ～ 110 | 50 ～ 150 | 60 ～ 110 | 40 ～ 150 | 50 ～ 110 |
| Underneck length (ℓ1)(mm) | 30 | - | - | - | - | 24 ～ 36 | - | 2 ～ 80 | 4 ～ 50 | 0.5 ～ 20 | 0.3 ～ 50 | 0.3 ～ 60 | - | - | - | - | 1 ～ 80 | 6 ～ 160.8 | 5 ～ 60 | 0.3 ～ 50 | - | 0.3 ～ 5 | 1 ～ 60 | - | - | - | - | 0.3 ～ 18 | - | - | 20 ～ 61 | - | - | - | - | 15 ～ 75 | 17 ～ 80 | 15 ～ 80 | 4 ～ 55 | 15 ～ 75 | 17 ～ 72 | 15 ～ 75 | 17 ～ 72 | - | 1.5 ～ 60 |
| Shank diameter (d)(mm) | 12 | 6 | 9.52 ～ 50.8 | 4 ～ 12 | 7.94 ～ 30/32 | - | 3 ～ 20 | 3 ～ 6 | 4 ～ 8 | 4 | 4 ～ 6 | 3 ～ 6 | 4 ～ 32 | 6 | 4 ～ 16 | 4 ～ 25 | 4 ～ 16 | 6 ～ 20 | 6 ～ 12 | 3 ～ 6 | 6 ～ 12 | 4 | 4 ～ 8 | 4 ～ 25 | 4 ～ 32 | 3 ～ 12 | 6 ～ 25 | 4 | 6 ～ 16 | 6 ～ 20 | 6 ～ 16 | 6 | 4 ～ 12 | 3 ～ 25 | 4 ～ 16 | 3 ～ 20 | 4 ～ 16 | 3 ～ 25 | 6 ～ 10 | 6 ～ 20 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 3 ～ 20 | 4 ～ 12 |
| R Precision(μm) | - | 0.01～-0.01 | - | -0.007～0.007 ～ -0.002～0.002 | - | ±8 | -0.007 ~ +0.003 ～ ±0.01 | 0.005～-0.005 ～ 0.01～-0.01 | 0.01～-0.01 | 0.005～-0.005 | 0.005～-0.005 ～ 0.01～-0.01 | -0.005～0.005 ～ -0.002～0.002 | ±0.02 | ±0.003 | ±0.005 ～ ±0.01 | -0.01～+0.01 | -0.005 to +0.005 ～ -0.005～+0.005 | - | - | -0.005～+0.005 | 0.01～-0.01 | 0.005～-0.005 ～ 3 to -3 | 0.005～-0.005 ～ 0.01～-0.01 | ±0.02 | 0～-50 | - | ±0.02 | 0.05～-0.05 ～ 5 to -5 | - | - | - | -0.005 ~ +0.001 ～ ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 |
| Machining Application | - | Curved surface / Side / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | - | Curved surface / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Engraving / R Groove | - | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface | Curved surface | Curved surface | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove | Curved surface / Side / Engraving / R Groove |
Loading...
Filter by:
Stock
-
- Show only stock items
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- R 4.0
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Type
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.1
- 1.12
- 1.19
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.42
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.39
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.81
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.874
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.874
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.8
- 10
- 10.5
- 10.8
-
11～11.5
- 11
- 11.2
- 11.278
- 11.28
- 11.3
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.199
- 14.2
- 14.4
- 14.5
-
15
-
16～16.993
- 16
- 16.5
- 16.99
- 16.993
-
17～17.9
- 17
- 17.5
- 17.9
-
18
-
19
-
20
-
21～21.5
- 21
- 21.5
-
22～22.682
- 22
- 22.3
- 22.68
- 22.682
-
23
-
24
-
25
-
26～26.9
- 26
- 26.9
-
27
-
28～28.6
- 28
- 28.296
- 28.3
- 28.6
-
29
-
30
-
31.6
-
32
-
33
-
34
-
35
-
36～36.5
- 36
- 36.5
-
38
-
40
-
44.6
-
45～45.49
- 45
- 45.49
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Coating
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
Machining Application
Brand
CAD data type
-
- 2D
- 3D
Categories related to Carbide Ball End Mills
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.