Carbide Ball End Mills（Coating：Non-Coated）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

MCD Diamond Tip Ball 2 Flutes

VAN_HOORN

[Features]
· The cutting edge is a diamond tip. The tool service life is 2 to 5 times that of PCD and 10 to 20 times that of diamond coated.
· Ideal for machining graphite and composite materials such as CFRP, etc. Provides a beautiful aluminum finish too.
· European-made high quality for peace of mind.

Select to compare

Configure now
Starting from^∗ ：	1,213.84 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

RSB230 Ball-End Mill for Resin Clear Cut

NS TOOL

3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, for Plus Check, Ball End CAP-EBD

OSG

Ball end mill for copper, aluminum alloy, and plastic. Good cutting properties and expels debris well.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSB200 CBN Super Speed Ball End Mill

NS TOOL

High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

Select to compare

Configure now
Starting from^∗ ：	160.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Ball End Mill with Blades LS-BE-R

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	260.52 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide ball end mill, 2-flute / short model

MISUMI

Highly versatile due to the non-coated specification

Volume Discount

Non-Coated
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

MISUMI

A type for aluminum that achieves high efficiency while having the affordable uncoated design

Volume Discount

Non-Coated
Aluminum
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

MISUMI

The price of the non-coated product with excellent cost performance has been further reduced

Volume Discount

Non-Coated
Graphite
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	77.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

MISUMI

Sharp edge that's suitable for machining resin

Volume Discount

Non-Coated
Resin
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	30.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	136.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, MG-EBD-3

OSG

Shank diameter (mm) 3, total length (mm) 40, helix angle: standard helix (30 to 44°).

Select to compare

Configure now
Starting from^∗ ：	64.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-EBD

OSG

2-Flute Ball End Type CBN-EBD
-Demonstrates high performance when machining high strength materials and cast iron
-The wide selection of CBN tools allows you to choose the best tool for your application.

Select to compare

Configure now
Starting from^∗ ：	235.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, CBN-SXB

OSG

Spiral ball blade with its own twist achieve deep cuts in acute sharpness and small diameter. CBN end mill that can be used in the cut of the Carbide

Select to compare

Configure now
Starting from^∗ ：	125.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, MG-EBD

OSG

Achieves long tool life at medium low speed by adopting the high toughness cemented carbide

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	132.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End Type, GF-EBDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	108.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Shank, Ball End Type, GF-LS-EBDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	125.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck, Ball End CBN-LN-SXB

OSG

2-Flute Long Neck Ball End Type CBN-LN-SXB
-Achieves deep cut milling even with small diameters. Good cutting quality.
With the effect of spiral cutting, both cutting edge strength and sharpness are achieved.
-CBN sintered body is used for flute material.

Select to compare

Configure now
Starting from^∗ ：	110.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CGB2000 2-Flute Ball for Graphite Processing

UNION TOOL

[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.

Select to compare

Configure now
Starting from^∗ ：	115.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CGB4000 4-Flute Ball for Graphite Processing

UNION TOOL

[Features]
· An end mill dedicated for graphite machining.
· Adopts a carbide base material with excellent wear resistance.

Select to compare

Configure now
Starting from^∗ ：	228.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

CPRB for Resin Processing, 2-Flute Long Neck Ball

UNION TOOL

[Features]
· Long Neck Ball End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck part

Select to compare

Configure now
Starting from^∗ ：	72.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSBL200 CBN Super Speed Long Neck Ball End Mill

NS TOOL

Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

Select to compare

Configure now
Starting from^∗ ：	166.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SFB200 CBN Super Finish Ball End Mill

NS TOOL

The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

Select to compare

Configure now
Starting from^∗ ：	200.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

NS TOOL

The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

Select to compare

Configure now
Starting from^∗ ：	239.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining

NS TOOL

World's smallest ball end mill "Micro Ball" extends the microfabrication area

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	76.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)

NS TOOL

[Features]
Long shank cutter with 2 cutting edges.
[Features]
Suitable for machining aluminium alloys, copper and resins.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long-Neck Ball End Mill (for Deep Ribs) NHB-2

NS TOOL

Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	75.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Miniature Ball End Mill NCB-2

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	80.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Ball End Mill NSBL-2

NS TOOL

The blade length is 5 times the radius. 3D machining utilizing the benefits of a long shank is possible

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	124.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aluminum Ball-End Mill ALB225

NS TOOL

The unique blade shape suppresses chattering during corner and side machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Ball End Mill for Copper Electrode / Aluminum / Plastic DB

NS TOOL

Uses a very sharp cutting edge for outstanding nonferrous machining performance

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GCBE 2-Flute Carbide Ball

SANKO MFG

Machining of hardened steel, high-speed machining and high-efficiency machining are possible.
Skew angle: standard spiral (30 to 44°)
R accuracy (µm)-30 to 0.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.63 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

GCALBE Carbide Ball for Aluminum Use

SANKO MFG

[Features]
· The unique round shape discharges cutting chips smoothly and the center part has excellent sharpness, ideal for machining aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	125.55 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Small Diameter Ball End Mill, 2-Flute

ATOM

Good surface roughness of the cutting edge realizes high quality finished surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	80.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Standard Ball End Mill, 2-Flute

ATOM

Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	68.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Standard Ball End Mill, 4-Flute

ATOM

Supports a wide range of applications, from general steel to nonferrous metals and resins. A multi-purpose type with support from rough machining to finish machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

BEM2 Ball End Mill G2

ASAHI TOOLS

Up to R4.5 specification products (solid tip) have a torsional shape on the rounded section as well, resulting in corners with improved profiling efficiency, which are ideal for rounding.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	140.39 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

BEM2 Long Shank Ball End Mill G2

ASAHI TOOLS

2-flute ball end mill long shank type. Ideal for rounding corners.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	187.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SBD2 Ball End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.35 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

SBD2L Long Ball End Mill, 2-Flute, Non-Coated

OKAZAKI SEIKO

[Features]
A long ball end cutter made of carbide with 2 cutting edges.
The deep rib prevents the tool from interfering with deep cuts.
The long shank allows milling over a wide area.
[Features]
Suitable for milling curved surfaces, engraving and R-slot milling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	85.50 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Solid Ball End Mill (for Aluminum Etc.) with Rounded Rake Angle AL-DBPS2 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid Ball-End Mill for Graphite GF-SBL Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	148.42 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid Ball-End Mill for Graphite GF-SBX Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	164.71 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Solid Ball-End Mill for Graphite GF-SBR Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	107.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	VAN_HOORN	NS TOOL	OSG	NS TOOL	DIJET	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	SANKO MFG	SANKO MFG	ATOM	ATOM	ATOM	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET
Product Series	MCD Diamond Tip Ball 2 Flutes	RSB230 Ball-End Mill for Resin Clear Cut	2-Flute, for Plus Check, Ball End CAP-EBD	SSB200 CBN Super Speed Ball End Mill	Ball End Mill with Blades LS-BE-R	SSPB220 CBN Super Spiral Ball End Mill	Carbide ball end mill, 2-flute / short model	Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model	Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model	CBN Ball End Mill, 2-Flute	2-Flute, Ball End, Miniature, MG-EBD-3	2-Flute, Ball End, CBN-EBD	2-Flute, Ball End, CBN-SXB	2-Flute, Ball End, MG-EBD	For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL	For Graphite, 2 Flutes, Ball End Type, GF-EBDR	For Graphite, 2 Flutes, Long Shank, Ball End Type, GF-LS-EBDR	2-Flute Long Neck, Ball End CBN-LN-SXB	CGB2000 2-Flute Ball for Graphite Processing	CGB4000 4-Flute Ball for Graphite Processing	CPRB for Resin Processing, 2-Flute Long Neck Ball	SSBL200 CBN Super Speed Long Neck Ball End Mill	SFB200 CBN Super Finish Ball End Mill	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	NSMB100 Carbide Ball End Mill Micro Ball for Ultra-Fine Machining	DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)	Long-Neck Ball End Mill (for Deep Ribs) NHB-2	Miniature Ball End Mill NCB-2	Long Ball End Mill NSBL-2	Aluminum Ball-End Mill ALB225	Ball End Mill for Copper Electrode / Aluminum / Plastic DB	GCBE 2-Flute Carbide Ball	GCALBE Carbide Ball for Aluminum Use	Small Diameter Ball End Mill, 2-Flute	Standard Ball End Mill, 2-Flute	Standard Ball End Mill, 4-Flute	BEM2 Ball End Mill G2	BEM2 Long Shank Ball End Mill G2	SBD2 Ball End Mill, 2-Flute, Non-Coated	SBD2L Long Ball End Mill, 2-Flute, Non-Coated	Solid Ball End Mill (for Aluminum Etc.) with Rounded Rake Angle AL-DBPS2 Type	Solid Ball-End Mill for Graphite GF-SBL Type	Solid Ball-End Mill for Graphite GF-SBX Type	Solid Ball-End Mill for Graphite GF-SBR Type
Starting from^∗	1,213.84 € *Unit price with basic configuration	42.09 € *Unit price with basic configuration Volume Discount	72.61 € *Unit price with basic configuration Volume Discount	160.01 € *Unit price with basic configuration	260.52 € *Unit price with basic configuration Volume Discount	172.90 € *Unit price with basic configuration	- Volume Discount	- Volume Discount	77.02 € *Unit price with basic configuration Volume Discount	30.26 € *Unit price with basic configuration Volume Discount	136.38 € *Unit price with basic configuration Volume Discount	64.79 € *Unit price with basic configuration	235.08 € *Unit price with basic configuration	125.12 € *Unit price with basic configuration	67.83 € *Unit price with basic configuration Volume Discount	132.60 € *Unit price with basic configuration	108.56 € *Unit price with basic configuration	125.73 € *Unit price with basic configuration	110.50 € *Unit price with basic configuration	115.16 € *Unit price with basic configuration	228.98 € *Unit price with basic configuration	72.74 € *Unit price with basic configuration	166.68 € *Unit price with basic configuration	200.00 € *Unit price with basic configuration	239.99 € *Unit price with basic configuration	76.47 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	95.50 € *Unit price with basic configuration Volume Discount	75.47 € *Unit price with basic configuration Volume Discount	80.25 € *Unit price with basic configuration Volume Discount	124.12 € *Unit price with basic configuration Volume Discount	34.47 € *Unit price with basic configuration Volume Discount	74.53 € *Unit price with basic configuration Volume Discount	86.63 € *Unit price with basic configuration Volume Discount	125.55 € *Unit price with basic configuration Volume Discount	80.70 € *Unit price with basic configuration Volume Discount	68.47 € *Unit price with basic configuration Volume Discount	78.85 € *Unit price with basic configuration Volume Discount	140.39 € *Unit price with basic configuration Volume Discount	187.46 € *Unit price with basic configuration Volume Discount	64.35 € *Unit price with basic configuration Volume Discount	85.50 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	148.42 € *Unit price with basic configuration Volume Discount	164.71 € *Unit price with basic configuration Volume Discount	107.15 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	6 Days	6 Days	6 Days	8 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	7 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	9 Days	9 Days	6 Days	6 Days	6 Days	6 Days	6 Days	10 Days	10 Days	8 Days	8 Days	8 Days	8 Days
Specifications							Non-Coated General Steel 2 Flutes S (Short)	Non-Coated Aluminum 2 Flutes S (Short)	Non-Coated Graphite 2 Flutes L (Long)	Non-Coated Resin 2 Flutes S (Short)	High-Hardness Steel 2 Flutes
R Size(mm)	6	0.1 ～ 3	0.5 ～ 10	0.1 ～ 1	5 ～ 25	0.1 ～ 3	0.2 ～ 10	0.5 ～ 6	1 ～ 6	0.5 ～ 6	0.3 ～ 1	0.05 ～ 1.5	3 ～ 6	0.2 ～ 1.5	0.5 ～ 12.5	1 ～ 6	1 ～ 6	1 ～ 6	0.2 ～ 1.5	0.2 ～ 6	2 ～ 10	0.2 ～ 3	0.05 ～ 1	0.1 ～ 1	0.01 ～ 0.05	0.005 ～ 0.05	0.5 ～ 3	0.4 ～ 3	0.2 ～ 0.9	3 ～ 6	0.3 ～ 6	0.5 ～ 3	0.3 ～ 10	3 ～ 10	0.05 ～ 0.475	0.5 ～ 10	0.5 ～ 10	2 ～ 20	5 ～ 15	0.5 ～ 12.5	1 ～ 12.5	0.5 ～ 5	1 ～ 6	1 ～ 6	1 ～ 6
Type	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball
work material	Aluminum[◎] / Graphite[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	-	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Graphite[◎]	Graphite[◎]	Graphite[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[◎] / Copper[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	Graphite[◎]	Graphite[◎]	Graphite[◎]
Blade length (ℓ)(mm)	12	0.6 ～ 30	2.5 ～ 38	0.15 ～ 1.2	30 ～ 80	0.15 ～ 3.6	0.8 ～ 25	1.5 ～ 18	10 ～ 55	1.5 ～ 18	0.5 ～ 1.2	0.2 ～ 8	4 ～ 7	0.3 ～ 1.8	2.5 ～ 50	20 ～ 130	10 ～ 65	10 ～ 65	0.3 ～ 1.8	0.8 ～ 55	20 ～ 60	0.4 ～ 6	0.08 ～ 1.2	0.15 ～ 1.2	0.02 ～ 0.1	0.01 ～ 0.1	1.5 ～ 9	0.6 ～ 6	0.8 ～ 3.6	15 ～ 30	0.45 ～ 24	2 ～ 12	0.9 ～ 40	15 ～ 45	0.2 ～ 2.5	3 ～ 40	3 ～ 40	9 ～ 80	30 ～ 60	2 ～ 55	2 ～ 60	1.5 ～ 15	10 ～ 55	20 ～ 130	10 ～ 55
Number of flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	4	2	2	2	1	1	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	78	50 ～ 130	60 ～ 180	52 ～ 53	200 ～ 350	50 ～ 70	40 ～ 150	50 ～ 110	100 ～ 200	50 ～ 120	50	40	90 ～ 110	45 ～ 50	50 ～ 180	100 ～ 200	75 ～ 130	100 ～ 200	45 ～ 50	60 ～ 200	100 ～ 250	45 ～ 120	50 ～ 53	50 ～ 52	50	45	50 ～ 110	45 ～ 120	35	120 ～ 180	60 ～ 120	45 ～ 80	50 ～ 160	80 ～ 160	40	40 ～ 105	40 ～ 105	100 ～ 220	130 ～ 240	60 ～ 180	80 ～ 230	50 ～ 100	100 ～ 200	100 ～ 190	80 ～ 130
Underneck length (ℓ1)(mm)	30	2 ～ 80	-	0.3 ～ 5	70 ～ 150	0.3 ～ 18	-	14 ～ 68	20 ～ 65	-	1.5 ～ 5	-	20	1.2 ～ 6	-	25 ～ 80	20 ～ 85	25 ～ 130	2 ～ 15	-	-	1 ～ 50	0.3 ～ 10	0.5 ～ 5	-	-	4 ～ 50	6 ～ 50	-	-	3 ～ 60	-	-	-	-	-	-	-	-	-	14 ～ 21	-	-	-	-
Shank diameter (d)(mm)	12	3 ～ 6	4 ～ 20	4	12 ～ 42	4	3 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4	3	6 ～ 12	4 ～ 6	4 ～ 25	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 12	4 ～ 20	4 ～ 6	4	4	4	4	4 ～ 8	4 ～ 6	3	6 ～ 12	4 ～ 12	4 ～ 6	3 ～ 20	6 ～ 20	3	4 ～ 20	4 ～ 20	10 ～ 32	12 ～ 32	4 ～ 25	6 ～ 25	4 ～ 10	4 ～ 12	6 ～ 12	4 ～ 12
R Precision(μm)	-	0.005～-0.005 ～ 0.01～-0.01	-0.01～+0.01	0.005～-0.005 ～ 3 to -3	-	0.05～-0.05 ～ 5 to -5	±0.01	±0.01	±0.01	±0.01	±0.005	-	-0.01～+0.01	-0.005～+0.005	-	-	-	-	-0.01～+0.01	-0.01～0.01	-0.01～0.01	-0.01～0.01	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	-	0.002～-0.002	0.01～-0.01	0.01～-0.01	0.01～-0.01	0.02～-0.02	0.01～-0.01	0.01～-0.01	0～-0.03	0～-0.03	-	±0.01	±0.01	-	-	-10～+10	-	0～-50	0～-40	0～-40	0～-40
Machining Application	-	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.5
  - 17.9
- 18
- 19
- 20
- 21～21.5
  - 21
  - 21.5
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 27
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-18/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

49

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

155

160

170

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 54～54.5
  - 54
  - 54.5
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[14-68/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7

7.80

7.94

8

9

9.52

9.70

10

11

11.70

12

12.7

14

15

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear