Carbide Ball End Mills

Search by sub-category

246

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Promotional pricing

HM Coated 2-Flute, Long Neck Ball HSLB

UNION TOOL

[Features]
· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	28.03 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

RSB230 Ball-End Mill for Resin Clear Cut

NS TOOL

3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Ball End Mill CSBE

EIKOSHA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	103.57 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

MISUMI

A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

MISUMI

Diamond coated products that exert tremendous durability are available in the industry's lowest price

Volume Discount

DIA
Graphite
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	111.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, Miniature, FX-MG-EBD-3

OSG

The use of FX coating and high strength carbide allows a wide range of machining.
Coated for steel
Standard/Alternation category: Manufacturer's standard product
Number of blades (pcs.) 2
Shaft diameter (mm) 3, Total length (mm) 40, Spiral angle: standard spiral (30 to 44°)
R Accuracy (µm) ±10.

Select to compare

Configure now
Starting from^∗ ：	84.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute, Ball End, DIA-EBD

OSG

Not only is high speed processing of aluminum possible, dry cutting of aluminum is also possible. A dramatic elongation of the life of tool is possible for graphite processing as well.

Select to compare

Configure now
Starting from^∗ ：	112.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

OSG

High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Spherical Cutter, 4-Flute

EIKOSHA

Copying Back / Curved Surface Deburring

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	155.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flutes Short-Shank Ball End Mills HSB-S

UNION TOOL

[Features]
· Can be used for machining at short overhang lengths.

Select to compare

Configure now
Starting from^∗ ：	18.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroMill 216 Ball Nose Milling Cutter

SANDVIK

Select to compare

Configure now
Starting from^∗ ：	513.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

MISUMI

The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating

Volume Discount

DLC
Aluminum
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	138.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	18.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

2-Flute, Ball End, FX-MG-EBD

OSG

Can work with materials ranging from general materials to quenched steel. Can also be compatible with high speed model machining centers.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	91.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material, achieving long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	132.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spherical Ball End GX-EQD-SF

OSG

Ball end mills having spherical cutting tips developed for shrink fitting.

Select to compare

Configure now
Starting from^∗ ：	142.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

HSB, HM Coated 2-Flute Ball

UNION TOOL

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	37.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MSBH345 3-Flute Ball-End Mill for High-Hardness

NS TOOL

Enables high-efficiency machining with little chatter through the adoption of a unique three-flute blade shape and variable distribution

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

MSB230 MUGEN-COATING 2-Flute Ball End Mill

NS TOOL

Supports three-dimensional precision machining from low to high speeds

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

UT COAT 2-Flute Long-Neck Ball CSLEB

UNION TOOL

[Features]
· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
· Supports a wide range from copper and raw materials to 55 HRC.

Select to compare

Configure now
Starting from^∗ ：	45.25 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

X Coated Miniature Ball-End Mill NCB-2X

NS TOOL

Essential for high-precision and high-quality precision mold processing. Features a small diameter and rigidity, and enables fast feeding

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	90.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type

EIKOSHA

Graphite Electrode Processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Spherical Cutter, 2-Flute

EIKOSHA

Copying Back / Curved Surface Deburring

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	106.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WXL-Coated 2-Flute Ball End Type WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Miniature Ball End Mill KMBE-2

KYOWA SEIKO

[Features] It can be used for side machining, curved surface machining, curving, R-machining and grooving. [Features] Using carbide materials with high hardness, it can cut general steel, heat-treated steel and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSPB220 CBN Super Spiral Ball End Mill

NS TOOL

[Features]
· Spiral ball shape used to improve sharpness of cutting edge.
· The cutting edge shape used improves the chipping resistance of the cutting edge.
· When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
Torsion angle: 20°

Select to compare

Configure now
Starting from^∗ ：	172.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc)

SANDVIK

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	146.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

SPEED / T 2 Flute SI Coat Ball

SPEED TIGER

[Features]
· A low priced ball end mill with a high hardness, high thermal oxidation temperature silicon-based (SI) coating applied to the Nano600 material of the frequently used sizes of R0.5 to R3.0 with a total length of 75 mm, R4 to R6 with a total length of 100 mm, and R8 with a total length of 150 mm, making it ideal for NAK molded materials and SKD cutting materials.
· Torsion angle of 35° ideal for rough-medium finishing.

Select to compare

Configure now
Starting from^∗ ：	52.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

EPL-SB-EBM, Carbide end mill

OSG

Carbide end mill - For general applications - 4 flutes, ball nose

Select to compare

Configure now
Starting from^∗ ：	54.40 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

TSC series carbide ball end mill (R accuracy ±3μm)

MISUMI

[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	46.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	64.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	24.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	13.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short model

MISUMI

[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	23.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TiAlN
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	45.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide ball end mill, short model

MISUMI

[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, regular model

MISUMI

[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / short model

MISUMI

[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 3-flute / regular model

MISUMI

[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, short model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide ball end mill, 4-flute / regular model

MISUMI

[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Carbide ball end mill, 2-flute / short model

MISUMI

Highly versatile due to the non-coated specification

Volume Discount

Non-Coated
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

MISUMI

[Features]
-High rigidity, 2 flute type with longitudinal taper
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	34.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application

	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	UNION TOOL	NS TOOL	EIKOSHA	MISUMI	MISUMI	OSG	OSG	OSG	EIKOSHA	UNION TOOL	SANDVIK	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	UNION TOOL	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	EIKOSHA	EIKOSHA	OSG	KYOWA SEIKO	NS TOOL	SANDVIK	SPEED TIGER	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	HM Coated 2-Flute, Long Neck Ball HSLB	RSB230 Ball-End Mill for Resin Clear Cut	Carbide Solid Ball End Mill CSBE	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute	2-Flute, Ball End, Miniature, FX-MG-EBD-3	2-Flute, Ball End, DIA-EBD	2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6	Carbide Solid Spherical Cutter, 4-Flute	2-Flutes Short-Shank Ball End Mills HSB-S	SANDVIK CoroMill 216 Ball Nose Milling Cutter	DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	2-Flute, Ball End, FX-MG-EBD	For Graphite, 2 Flutes, Ball End, Long Type, GF-EBDL	Spherical Ball End GX-EQD-SF	HSB, HM Coated 2-Flute Ball	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230 MUGEN-COATING 2-Flute Ball End Mill	UT COAT 2-Flute Long-Neck Ball CSLEB	X Coated Miniature Ball-End Mill NCB-2X	Carbide Graphite Solid Ball End Mill 2-Flute, Standard Type	Carbide Solid Spherical Cutter, 2-Flute	WXL-Coated 2-Flute Ball End Type WXL-EBD	Carbide Miniature Ball End Mill KMBE-2	SSPB220 CBN Super Spiral Ball End Mill	CoroMill Plura, Center Cut, R216.42-AK-G-16 (Hardness 43HRc to 63HRc)	SPEED / T 2 Flute SI Coat Ball	EPL-SB-EBM, Carbide end mill	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAL series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC series carbide ball end mill, short model	TSC series carbide ball end mill, 4-flute / regular model	Carbide ball end mill, 2-flute / short model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
Starting from^∗	28.03 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	42.09 € *Unit price with basic configuration Volume Discount	103.57 € *Unit price with basic configuration Volume Discount	- Volume Discount	111.08 € *Unit price with basic configuration Volume Discount	84.73 € *Unit price with basic configuration	112.67 € *Unit price with basic configuration	88.82 € *Unit price with basic configuration Volume Discount	155.28 € *Unit price with basic configuration Volume Discount	18.08 € *Unit price with basic configuration	513.00 € *Unit price with basic configuration	- Volume Discount	138.36 € *Unit price with basic configuration Volume Discount	18.61 € *Unit price with basic configuration Volume Discount	91.40 € *Unit price with basic configuration Volume Discount	132.60 € *Unit price with basic configuration	142.46 € *Unit price with basic configuration	37.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	96.47 € *Unit price with basic configuration Volume Discount	28.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	45.25 € Special price *Unit price with basic configuration Promotional pricing	90.74 € *Unit price with basic configuration Volume Discount	110.27 € *Unit price with basic configuration Volume Discount	106.58 € *Unit price with basic configuration Volume Discount	49.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	95.00 € *Unit price with basic configuration Volume Discount	172.90 € *Unit price with basic configuration	146.85 € *Unit price with basic configuration Volume Discount	52.52 € Special price *Unit price with basic configuration Promotional pricing	54.40 € *Unit price with basic configuration	46.74 € *Unit price with basic configuration Volume Discount	64.20 € *Unit price with basic configuration Volume Discount	24.07 € *Unit price with basic configuration Volume Discount	13.95 € *Unit price with basic configuration Volume Discount	23.35 € *Unit price with basic configuration Volume Discount	45.59 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	34.83 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	6 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	Same day	6 Days	Same day	Same day	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	2 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Specifications	Stock			TS General Steel 2 Flutes B (Stub)	DIA Graphite 2 Flutes L (Long)							DLC Aluminum 2 Flutes S (Short)	High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)				Stock													TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	XAL General Steel 2 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes
R Size(mm)	0.05 ～ 3	0.1 ～ 3	0.4 ～ 20	0.5 ～ 5	0.5 ～ 6	0.2 ～ 1.5	0.5 ～ 6	0.25 ～ 3	3 ～ 10	0.1 ～ 2	-	0.5 ～ 6	0.3 ～ 1	0.1 ～ 10	0.5 ～ 15	1 ～ 6	10	0.03 ～ 6	0.5 ～ 3	0.05 ～ 6	0.05 ～ 3	0.2 ～ 0.9	0.5 ～ 15	0.5 ～ 10	0.05 ～ 10	0.1 ～ 1.5	0.1 ～ 3	0.5 ～ 8	R 4.0	-	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.05 ～ 10	0.2 ～ 12.5	2 ～ 8	0.05 ～ 10	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	0.2 ～ 10	0.15 ～ 5
Type	Long-Neck Ball	Long-Neck Ball	Ball	Long-Neck Ball / Spherical Ball	Ball	Ball	Ball	Long-Neck Ball	Spherical Ball	Ball	-	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Tapered neck ball	Long-Neck Ball	-	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball
work material	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-	Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Graphite[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Graphite[◎]	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○]	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade length (ℓ)(mm)	0.08 ～ 4.8	0.6 ～ 30	3 ～ 70	-	3 ～ 55	0.8 ～ 8	2.5 ～ 22	0.5 ～ 6	-	0.2 ～ 4	7.874 ～ 45.49	1.5 ～ 18	0.5 ～ 1.2	0.4 ～ 25	2.5 ～ 55	20 ～ 130	15	0.06 ～ 22	1.5 ～ 10	0.1 ～ 20	0.08 ～ 4.8	0.8 ～ 3.6	8 ～ 60	-	0.2 ～ 38	0.4 ～ 8	0.15 ～ 3.6	1.5 ～ 32	16	-	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.2 ～ 38	0.8 ～ 50	8 ～ 30	0.2 ～ 25	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	0.8 ～ 25	0.3 ～ 8
Number of flutes(sheet)	2	2	2	2	2	2	2	2	4	2	-	2	2	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	-	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2
Coating	For High Hardness (Silicon Group)	Non-Coated	-	For High Hardness (Silicon Group)	Dia Coat	TiAlN	Dia Coat	TiAlN	-	-	-	DLC	Non-Coated	MRC	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiCN	TiCN	-	-	For General Steels (AlCrN, etc.)	-	Non-Coated	Other	Other	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)
Overall Length (L)(mm)	45 ～ 120	50 ～ 130	45 ～ 180	70 ～ 90	50 ～ 200	40	60 ～ 140	60 ～ 90	70 ～ 100	35 ～ 40	20 ～ 50	50 ～ 110	50	50 ～ 150	50 ～ 180	100 ～ 200	58	50 ～ 110	60 ～ 80	50 ～ 110	45 ～ 120	35	60 ～ 180	70 ～ 100	40 ～ 160	40	50 ～ 70	57 ～ 125	100	-	60 ～ 90	40	40 ～ 65	40 ～ 160	40 ～ 180	100 ～ 250	40 ～ 150	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	40 ～ 150	50 ～ 110
Underneck length (ℓ1)(mm)	0.3 ～ 60	2 ～ 80	-	4 ～ 55	20 ～ 65	-	-	2.5 ～ 30	18 ～ 42	-	-	14 ～ 68	1.5 ～ 5	-	-	25 ～ 80	-	-	-	-	0.3 ～ 60	-	-	4 ～ 42	-	-	0.3 ～ 18	3 ～ 8	-	-	-	-	-	-	-	-	15 ～ 75	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	-	1.5 ～ 60
Shank diameter (d)(mm)	3 ～ 6	3 ～ 6	4 ～ 32	6 ～ 10	4 ～ 12	3	4 ～ 12	6	6 ～ 16	4 ～ 6	9.52 ～ 50.8	4 ～ 12	4	4 ～ 20	4 ～ 25	6 ～ 12	12	4 ～ 12	6	4 ～ 12	3 ～ 6	3	4 ～ 25	4 ～ 16	4 ～ 20	3	4	6 ～ 16	8	-	6	6	4 ～ 12	3 ～ 20	3 ～ 25	4 ～ 16	3 ～ 20	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	3 ～ 20	4 ～ 12
R Precision(μm)	-0.005～0.005 ～ -0.002～0.002	0.005～-0.005 ～ 0.01～-0.01	±0.02	±0.01	±0.01	-0.01～+0.01	-	-0.005～+0.005	±0.01 ～ ±0.02	±3	-	±0.01	±0.005	±0.005 ～ ±0.01	-0.01～+0.01	-	-0.01～+0.01	-0.007～0.007 ～ -0.002～0.002	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-0.005～0.005 ～ -0.002～0.002	0.01～-0.01	±0.02	±0.01 ～ ±0.02	-0.007 to 0.003 ～ ±0.01	＋0.01～－0.01	0.05～-0.05 ～ 5 to -5	-	0 ～−0.02	-	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	-	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove

1
2
3
4
5
Next >>

Filter by:

Stock

- Show only stock items
Clear

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

R 4.0

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Type
Clear

work material
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.3
  - 0.32
  - 0.35
  - 0.38
  - 0.4
  - 0.45
  - 0.48
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.1
  - 1.12
  - 1.19
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.4
  - 1.42
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.39
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.85
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.81
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.874
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
  - 7.874
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.8
  - 10
  - 10.5
  - 10.8
- 11～11.5
  - 11
  - 11.2
  - 11.278
  - 11.28
  - 11.3
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.199
  - 14.2
  - 14.4
  - 14.5
- 15
- 16～16.993
  - 16
  - 16.5
  - 16.99
  - 16.993
- 17～17.9
  - 17
  - 17.9
- 18
- 19
- 20
- 22～22.682
  - 22
  - 22.3
  - 22.68
  - 22.682
- 23
- 24
- 25
- 26～26.9
  - 26
  - 26.9
- 28～28.6
  - 28
  - 28.296
  - 28.3
  - 28.6
- 29
- 30
- 31.6
- 32
- 33
- 34
- 35
- 36～36.5
  - 36
  - 36.5
- 38
- 40
- 44.6
- 45～45.49
  - 45
  - 45.49
- 48
- 50
- 55
- 58
- 60
- 65
- 70
- 80
- 90
- 100
- 110
- 120
- 130
[5-30/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Overall Length (L)(mm)
20

25

30

32

34

35

38

40

45

50

51

52

53

54

55

57

58

60

63

65

70

72

73

75

78

80

83

85

90

92

100

104

105

110

115

120

121

125

130

140

150

160

170

175

180

190

200

210

220

230

240

250

280

300

330

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.2～0.9
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.8
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.75
  - 1.8
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.4
  - 2.5
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25
- 26～26.8
  - 26
  - 26.8
- 27
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.5
  - 31
  - 31.5
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.2
  - 44
  - 44.2
- 45～45.2
  - 45
  - 45.2
- 46～46.5
  - 46
  - 46.5
- 47.5
- 48～48.9
  - 48
  - 48.9
- 49
- 50
- 52
- 54～54.5
  - 54
  - 54.5
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63.3
- 64.3
- 65
- 70
- 80～80.4
  - 80
  - 80.4
- 81.4
- 82.4
- 85
- 90～90.4
  - 90
  - 90.4
- 92.9
- 100
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160
[4-80/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
2.90

3

3.80

4

4.80

5

5.80

6

7.80

7.94

8

9.52

9.70

10

11.70

12

12.7

14

15.70

15.88

16

18

19.05

20

25

25.4

30

30/32

31.75

32

38.1

40

42

50

50.8
Drawing

Clear

R Precision(μm)
-10～+10

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.03

0 ～−0.02

0.002～-0.002

±0.003

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

±3

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10
Clear