Square End Mills (Carbide)（Machining Application：Inclined Cuts Page 4）

224

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 13 Days or Less 14 Days or Less

?* Information on days to ship and prices

Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE

OSG

Provides a wide variety of cutter paths, among high precision, high efficiency standing-wall machining, such as helical processing, contouring, ramping. Due to a long, slim shank, over-hang length is freely adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	100.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Extra Long, MG-EXML

OSG

A non-coated 4-flute extra long type.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	108.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, for Graphite, Short, DG-EMS

OSG

Graphite Processing Carbide 3-Flute With Center Blade 30°Helix Angle

Select to compare

Configure now
Starting from^∗ ：	133.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Short, FX-MG-EMS

OSG

General-purpose 4-flute end-mill with heat resistant FX coating. Supports high-speed, high feed machining.

Select to compare

Configure now
Starting from^∗ ：	70.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Short, MG-EMS

OSG

Pin corner.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	141.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

WXL-Coated 4-Flute Short WXL-EMS

OSG

[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

WX Super Coat, Multi-Flutes, Short, WXS-EMS

OSG

High-rigidity type end mill that was subjected to a new development WX super coat of super-hard and ultra-heat-resistant. High-speed machining of general steel can be done for high-speed, high-precision machining of hardened steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	67.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

4-Flute, Stub Shape, FX-MG-EMSS

OSG

Ultra-short blade with blade length 1.5 times the blade diameter, Ideal for high-speed machining with high-speed machining center.

Select to compare

Configure now
Starting from^∗ ：	70.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Stub (Gut Mill) WX-G-EMSS

OSG

Powerful 4-flute end-mill with reinforced base blade corner section. High-speed, high-feed is possible because of the high rigidity short blade length. Achieves reduction in lead-time during mass production processes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute Slim Shank, Short, FX-SS-EMS

OSG

Shank diameters are 1 mm smaller than blade diameter. Can freely adjust the extension and length.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	228.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Long FX-MG-EML

OSG

General-purpose 4-flute end-mill long blade type with heat resistant FX coating.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	183.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Long, MG-EML

OSG

Pin corner.

Select to compare

Configure now
Starting from^∗ ：	134.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, for Steel / Aluminum Alloy, Balance Check Short CRN-EMS

OSG

Precise finishing of copper and copper alloys possible with the CRN coated, well sharpened blade shape.

Select to compare

Configure now
Starting from^∗ ：	69.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute Short (Anti-Vibration Type, Multifunction) UP-PHS

OSG

Multifunctional end mill that suppresses chattering vibrations, along with grooving and side machining with high efficiency.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Stub Shape (Heavy Duty Cutting Type) WX-PHSS

OSG

Short blade type high helix end mill with both chip discharge ability and cutting edge rigidity at high level. Enables high feed machining of a large incision, due to the high rigidity short blade length.

Select to compare

Configure now
Starting from^∗ ：	59.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Medium, WX-PHN

OSG

Medium blade type high helix end mill with both chip discharge ability and cutting edge rigidity at high level. Suitable for a wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	62.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute, Long, WX-PHL

OSG

Long blade type high helix end mill with both chip discharge ability and cutting edge rigidity at high level.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN End Mill, 1-Flute, Short, MBOS

OSG

End mill with soldering CBN tip. Exhibits power in processing tempered steel.

Select to compare

Configure now
Starting from^∗ ：	150.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2-Flute, Regular Type, GF-EDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	88.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Shank, Regular Type, GF-LS-EDR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	105.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 2 Flutes, Long Type, GF-EDL

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	111.14 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 4-Flute, Regular Type, GF-EMR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	97.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

4-Flute Long Shank for Graphite, Regular Type, GF-LS-EMR

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	114.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Graphite, 4 Flutes, Long Type, GF-EML

OSG

Cemented carbide with superior abrasion resistance adopted as a base material. Achieves long-life graphite processing.

Select to compare

Configure now
Starting from^∗ ：	123.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Diamond End Mills 1-Flute Short Type MDOS

OSG

End mills with sintered diamond tip rows. Allow efficient machining of non-ferrous alloy and graphite.

Select to compare

Configure now
Starting from^∗ ：	263.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Helix Short Type FX-MG-EHS

OSG

4-flute groove cutting has fantastic chip evacuation, and prevents burrs with its excellent sharpness. 3-flute strong against chatter vibrations is also available.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	86.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Multi-Flute Long Shank Short (High Rigidity) FXS-LS-EMS

OSG

Extremely high rigidity long shank end mill tool. Can perform a wide variety of machining ranging from general materials to hardened steel.

Select to compare

Configure now
Starting from^∗ ：	87.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SSF120 CBN Super Surface End Mill

NS TOOL

Idea for reference surface protrusion machining during microfabrication. Adopts a unique shape and corner rounding to achieve a stable machined surface

Select to compare

Configure now
Starting from^∗ ：	146.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SMEZ120 CBN Micro Edge Z

NS TOOL

Sharp edge achieved by matching NS machining technology with carefully selected CBN material

Select to compare

Configure now
Starting from^∗ ：	226.66 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL2D-2 Aluminum-Only End Mill (2x Blade Length Type)

NS TOOL

High rigidity type with excellent cost performance

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)

NS TOOL

Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL5D-2 Aluminum-Only End Mill (5x Blade Length Type)

NS TOOL

Stable machined surface precision can be obtained over a wide range, with suppressed chatter even for high speed machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	74.53 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL3D-2DLC Aluminum-Only End Mill (DLC Coating)

NS TOOL

Capable of stable high efficiency machining under all conditions. Adopts a uniquely adhesive high DLC coating suited to long periods of machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	56.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NEA-2 Aluminum (Non-Ferrous) End Mill

NS TOOL

Machines using a wide chip pocket and sharp cutting quality.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.58 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AL-3LS Long Shank End Mill for Aluminum (Under-Shank)

NS TOOL

A slim type with a narrower shank than the blade diameter, supporting vertical wall processing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	93.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX-30 Lead 30 End Mill

NS TOOL

The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	33.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX-35 Lead 35 End Mill

NS TOOL

The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX-40 Lead 40 End Mill

NS TOOL

The blade length is 4x the blade diameter and the torsion angle is 40°. Strong torsion angle enables smooth chip discharge

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.12 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX-45 Lead 45 End Mill

NS TOOL

The blade length is 5x the blade diameter and the torsion angle is 45°. Features excellent sharpness enabling deep side cutting

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	95.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MHDH445 4-Flute Square-End Mill for High-Hardness

NS TOOL

Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC). Focusing on blade shape to improve deflection amount and processing accuracy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill

NS TOOL

Realizing the highest vertical accuracy. Produces a higher grade finished surface accuracy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MUGEN-COATING 2-Flute End Mill MSE230

NS TOOL

Adopts a unique Infinity coating for 2-flute end mill. Capable of universal cutting from roughing to finishing

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill

NS TOOL

Uses a rigid short blade. Sharp edge provides excellent sharpness, allowing machining with reduced deflection

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSEM230 MUGEN-COATING 2-Flute Medium End Mill

NS TOOL

The blade length is 4x the blade diameter and the torsion angle is 30°

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	43.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MSE345 MUGEN-COATING 3-Flute End Mill

NS TOOL

Adopts a unique Infinity coating for 3-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	64.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	Corresponding Standing Wall Type for 3-Blade Steel / Aluminum Alloy CA-MFE	4-Flute, Extra Long, MG-EXML	4-Flute, for Graphite, Short, DG-EMS	4-Flute, Short, FX-MG-EMS	4-Flute, Short, MG-EMS	WXL-Coated 4-Flute Short WXL-EMS	WX Super Coat, Multi-Flutes, Short, WXS-EMS	4-Flute, Stub Shape, FX-MG-EMSS	4-Flute, Stub (Gut Mill) WX-G-EMSS	4-Flute Slim Shank, Short, FX-SS-EMS	4-Flute, Long FX-MG-EML	4-Flute, Long, MG-EML	4-Flute, for Steel / Aluminum Alloy, Balance Check Short CRN-EMS	4-Flute Short (Anti-Vibration Type, Multifunction) UP-PHS	4-Flute, Stub Shape (Heavy Duty Cutting Type) WX-PHSS	4-Flute, Medium, WX-PHN	4-Flute, Long, WX-PHL	CBN End Mill, 1-Flute, Short, MBOS	For Graphite, 2-Flute, Regular Type, GF-EDR	For Graphite, 2 Flutes, Long Shank, Regular Type, GF-LS-EDR	For Graphite, 2 Flutes, Long Type, GF-EDL	For Graphite, 4-Flute, Regular Type, GF-EMR	4-Flute Long Shank for Graphite, Regular Type, GF-LS-EMR	For Graphite, 4 Flutes, Long Type, GF-EML	Diamond End Mills 1-Flute Short Type MDOS	High Helix Short Type FX-MG-EHS	Multi-Flute Long Shank Short (High Rigidity) FXS-LS-EMS	SSF120 CBN Super Surface End Mill	SMEZ120 CBN Micro Edge Z	AL2D-2 Aluminum-Only End Mill (2x Blade Length Type)	AL3D-2 Aluminum-Only End Mill (3x Blade Length Type)	AL5D-2 Aluminum-Only End Mill (5x Blade Length Type)	AL3D-2DLC Aluminum-Only End Mill (DLC Coating)	NEA-2 Aluminum (Non-Ferrous) End Mill	AL-3LS Long Shank End Mill for Aluminum (Under-Shank)	NX-30 Lead 30 End Mill	NX-35 Lead 35 End Mill	NX-40 Lead 40 End Mill	NX-45 Lead 45 End Mill	MHDH445 4-Flute Square-End Mill for High-Hardness	DX for Copper Electrode / Aluminum / Plastic, 2-Blade End Mill	MUGEN-COATING 2-Flute End Mill MSE230	MSES230P MUGEN-COATING 2-Flute Sharp Edge Short End Mill	MSEM230 MUGEN-COATING 2-Flute Medium End Mill	MSE345 MUGEN-COATING 3-Flute End Mill
Starting from^∗	100.21 € *Unit price with basic configuration	108.75 € *Unit price with basic configuration	133.25 € *Unit price with basic configuration	70.14 € *Unit price with basic configuration	141.18 € *Unit price with basic configuration	42.20 € *Unit price with basic configuration Volume Discount	67.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	70.14 € *Unit price with basic configuration	50.50 € *Unit price with basic configuration Volume Discount	228.90 € *Unit price with basic configuration	183.80 € *Unit price with basic configuration	134.88 € *Unit price with basic configuration	69.29 € *Unit price with basic configuration	82.30 € *Unit price with basic configuration Volume Discount	59.09 € *Unit price with basic configuration	62.60 € *Unit price with basic configuration	65.53 € *Unit price with basic configuration Volume Discount	150.58 € *Unit price with basic configuration	88.82 € *Unit price with basic configuration	105.13 € *Unit price with basic configuration	111.14 € *Unit price with basic configuration	97.40 € *Unit price with basic configuration	114.56 € *Unit price with basic configuration	123.15 € *Unit price with basic configuration	263.25 € *Unit price with basic configuration	86.80 € *Unit price with basic configuration Volume Discount	87.11 € *Unit price with basic configuration	146.69 € *Unit price with basic configuration	226.66 € *Unit price with basic configuration	28.74 € *Unit price with basic configuration Volume Discount	45.91 € *Unit price with basic configuration Volume Discount	74.53 € *Unit price with basic configuration Volume Discount	56.40 € *Unit price with basic configuration Volume Discount	73.58 € *Unit price with basic configuration Volume Discount	93.85 € *Unit price with basic configuration Volume Discount	33.50 € *Unit price with basic configuration Volume Discount	44.01 € *Unit price with basic configuration Volume Discount	62.12 € *Unit price with basic configuration Volume Discount	95.50 € *Unit price with basic configuration Volume Discount	65.94 € *Unit price with basic configuration Volume Discount	37.33 € *Unit price with basic configuration Volume Discount	19.20 € *Unit price with basic configuration Volume Discount	20.15 € *Unit price with basic configuration Volume Discount	43.04 € *Unit price with basic configuration Volume Discount	64.99 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Blade diameter (D)(φ)	10 ～ 12	5 ～ 8	4 ～ 12	2 ～ 30	13 ～ 25	1 ～ 30	4 ～ 8	3 ～ 16	3 ～ 4	8 ～ 12	10	12 ～ 25	3 ～ 12	3 ～ 12	2.5 ～ 16	3 ～ 5	3 ～ 5	6 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	6 ～ 12	3	3 ～ 30	0.2 ～ 2	0.03 ～ 0.1	0.5 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	3 ～ 6	5 ～ 12	0.5 ～ 12	0.5 ～ 12	0.5 ～ 11.9	0.5 ～ 11.9	1 ～ 4	0.5 ～ 6	0.1 ～ 12	0.1 ～ 12	0.5 ～ 12	3 ～ 12
work material	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Cast Iron[○]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Graphite[◎]	Aluminum[◎] / Graphite[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎] / Copper[◎]	Aluminum[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]
Blade length (ℓ)(mm)	15 ～ 18	50	8 ～ 24	6 ～ 45	26 ～ 45	2.5 ～ 45	11 ～ 19	4.5 ～ 24	4.5 ～ 6	20 ～ 30	34	40 ～ 67	8 ～ 26	8 ～ 26	3.8 ～ 24	10 ～ 17	12 ～ 20	3 ～ 6	10 ～ 65	10 ～ 65	20 ～ 130	10 ～ 65	10 ～ 65	20 ～ 130	7 ～ 13	8	10 ～ 55	0.1 ～ 1	0.03 ～ 0.1	1 ～ 24	3 ～ 36	5 ～ 60	3 ～ 36	10 ～ 30	7.5 ～ 18	1 ～ 24	1.5 ～ 36	2 ～ 47.6	2.5 ～ 59.5	2 ～ 8	1 ～ 12	0.15 ～ 30	0.15 ～ 24	2 ～ 48	8 ～ 30
Number of flutes(sheet)	3	4	4	4	4	4	4 ～ 6	4	4	4	4	4	4	4	4	4	4	1	2	2	2	4	4	4	1	3	4 ～ 8	1	1	2	2	2	2	2	3	2	2	2	2	4	2	2	2	2	3
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Coating	Non-Coated	Non-Coated	DG	For General Steels (AlCrN, etc.)	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	CrN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	DLC	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN
Shank diameter (d)(mm)	8 ～ 10	6 ～ 10	4 ～ 12	4 ～ 32	12 ～ 25	4 ～ 32	6 ～ 8	6 ～ 16	6	7 ～ 11	10	12 ～ 25	6 ～ 12	6 ～ 12	6 ～ 16	6	6	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	6	6 ～ 32	4	4	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6	4 ～ 10	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12
Overall Length (L)(mm)	130 ～ 150	90 ～ 95	80 ～ 120	40 ～ 125	85 ～ 120	40 ～ 125	60 ～ 70	50 ～ 100	50	100 ～ 110	80	90 ～ 140	70 ～ 140	60 ～ 100	60 ～ 115	60	60	50 ～ 75	75 ～ 130	100 ～ 200	100 ～ 200	75 ～ 130	100 ～ 200	100 ～ 200	50 ～ 75	50	80 ～ 200	50	50	45 ～ 80	45 ～ 90	50 ～ 110	45 ～ 90	50 ～ 70	80 ～ 150	40 ～ 75	40 ～ 85	45 ～ 105	40 ～ 110	60	45 ～ 60	45 ～ 80	45 ～ 80	50 ～ 110	50 ～ 80
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	12 ～ 24	20 ～ 85	25 ～ 130	25 ～ 80	20 ～ 85	25 ～ 130	25 ～ 80	12 ～ 24	-	-	0.5 ～ 5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Blade tip shape	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Micro R	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	With Lead
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	No torsion	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	No torsion	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.96
  - 3
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
  - 3.96
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.78
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.52
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.49
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.4
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.8
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
  - 29.8
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.8
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.8
  - 47
  - 47.2
  - 47.5
  - 47.6
  - 47.8
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.5
- 63
- 65
- 67
- 70～70.5
  - 70
  - 70.5
- 75
- 80
- 83
- 85
- 90
- 100
- 103
- 110
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16
Clear

Type
- Square
- Roughing
- Long-Neck Square
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Shank diameter (d)(mm)
1

1.5

2

2.9

3

3.175

3.8

4

4.8

5

5.8

6

6.35

7

7.8

8

9

9.53

9.7

10

11

11.7

12

14

15.5

15.7

16

18

19.3

19.7

20

24.2

25

30

32

42
Drawing

Clear

Overall Length (L)(mm)
30

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

79

80

82

83

84

85

86

87

88

89

90

92

93

95

97

99

100

104

105

107

108

109

110

111

112

115

118

120

121

123

124

125

126

128

130

135

140

145

150

155

156

160

165

170

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 58
- 60
- 62
- 64
- 65
- 66
- 67
- 70
- 74
- 76
- 79
- 80
- 85
- 94
- 99
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
- Micro R
Images

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Variable lead
Drawing

Clear

Brand

- MISUMI (70)
- Cost Efficient Products ()
- OSG (60)
- NS TOOL (42)
- NACHI(FUJIKOSHI) (23)
- KYOWA SEIKO (12)
- 7 LEADERS (11)
- GCT (2)
- UNION TOOL (2)
- SPEED TIGER (1)
- SANKO MFG (1)
- SANDVIK (0)
- WIDIN (0)
- PROCHI (0)
- ATOM (0)
- VAN_HOORN (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- TOYO DRILL (0)
- THE CUT (0)
- OKAZAKI SEIKO (0)
- GUHRING (0)
- EIKOSHA (0)
- KYOCERA (0)
- DIJET (0)
Clear