Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

Insulation Wires for Electric/Electronic/Communication Equipment

Insulated wires for electrical, electronic and communications devices supply power to general households and factories, electrical and electronic components in large machinery and communications devices. The wires are made of drawn copper, copper alloys, aluminum, etc., and are used to connect and conduct electricity between 2 points. These wires feature conductors made of copper, etc., covered with an insulator. The wires are classified into insulated wires that transmit high current and those that transmit low current, with insulation material made of vinyl, PVC, polyethylene, etc. Some insulated wires feature fluoropolymer and polyester materials. Some insulated wires also feature a protective coating on top of the insulator.
    • H07RN-F
      • Volume Discount

      LAPP

      H07RN-F

      Benefits · Made according to harmonised European type H07RN-F, with ◁HAR▷ testing mark for proven reliability and quality· ◁HAR▷-style cables are widely accepted and can be used in Europe· Versatile use in various applications and environments· Single-core cables of this type can be used for short circuit-proof and short-to-ground-proof installationApplication · For fixed or free installation or installation in protective cable conduits· Flexible use at temperatures down to -25°C· In the case of fixed and protected installation, operation is also possible up to 1000 V· Can be used in dry, wet and especially in harsh and oily environments· Suitable for outdoor use, subject to the temperature range· Withstands heavy mechanical stress· For use with hand-held or power supply devices as well as commercial and agricultural machine tools
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 10001 ~ 300-7.1 ~ 91BlackOther-
      Cena (bez VAT) od:
      52.91 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • H07V-K
      • Volume Discount

      LAPP

      H07V-K

      Benefits · Also available in large disposable cardboard boxes Large cardboard boxes are available depending on the colour and cross-section and generally only up to 6 mm² conductor cross-section· Different core insulation colours available· Made according to harmonised European type H07V-K, with ◁HAR testing mark for proven reliability and quality (not applicable for: transparent, green (single colour), yellow (single colour), all double colours (except green/yellow and yellow/green))· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· ◁HAR▷-style cables are widely accepted and can be used in EuropeApplication · Can be used for open installation on cable trays for equipotential bonding · Use at temperatures up to -40°C possible· For wiring circuits inside machines· For fixed and protected installation· For wiring lighting
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 30001.5 ~ 240-3.4 ~ 28.4---
      Cena (bez VAT) od:
      34.39 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • NSGAFÖU 1,8 / 3 kV
      • Volume Discount

      LAPP

      NSGAFÖU 1,8 / 3 kV

      Benefits · Suitable for short circuit- and short-to-ground-proof installation up to 1000 V due to high mechanical strength· Cable certified in accordance with VDE type NSGAFÖU, with ◁VDE▷ testing mark for proven reliability and qualityApplication · Compliant with standards for use in rail vehicles and buses· For fixed installation in ducts and closed installation channels· Flexible use at temperatures down to -25°C· Suitable for wiring inside control cabinets· For wiring circuits inside machines· Can be used in dry and oily environments
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 10001.5 ~ 300-7 ~ 38---
      Cena (bez VAT) od:
      67.42 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • H05V-K
      • Volume Discount

      LAPP

      H05V-K

      Benefits · Different core insulation colours available· Also available in large disposable cardboard boxes· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· ◁HAR▷-style cables are widely accepted and can be used in Europe· Made in accordance with harmonised European design H05V-K, with ◁HAR▷testing mark for proven reliability and qualityApplication · Can be used for open installation on cable trays for equipotential bonding · Use at temperatures up to -40°C possible· For wiring circuits inside machines· For fixed and protected installation· For wiring lighting
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 2500,75 ~ 1-2,7 ~ 2.8---
      Cena (bez VAT) od:
      16.11 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • MULTI-STANDARD SC 2.1
      • Volume Discount

      LAPP

      MULTI-STANDARD SC 2.1

      Benefits · Different core insulation colours available· UL certification according to technical data enables the product to be used on the North American market· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· Available as a ring or in a large, disposable cardboard box Large cardboard boxes are available depending on the colour and cross-section and generally only up to 6 mm² conductor cross-section· Versatile use in various applications and environments· Manufactured according to harmonised European type H07V-K, with ◁HAR▷ testing mark for proven reliability and quality (not applicable for dimensions 05 / 075 / 10 / 16 mm2, for single colours green and yellow and for double colours (except green/yellow)) · Compact design for easy processingApplication · Can be used in dry and damp rooms· Suitable for wiring inside control cabinets· Use at temperatures up to -40°C possible· For wiring circuits inside machines· For fixed and protected installation
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 30000,5 ~ 12012 ~ 222,7 ~ 19.8---
      Cena (bez VAT) od:
      32.53 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • NSHXAFÖ 1,8 / 3 kV
      • Volume Discount

      LAPP

      NSHXAFÖ 1,8 / 3 kV

      Benefits · Suitable for short circuit- and short-to-ground-proof installation up to 1000 V due to high mechanical strength· Halogen free and highly flame retardant materials reduce the risk of flame propagation, high smoke density and toxic flue gases in the event of a fire· Cable certified in accordance with VDE type NSHXAFÖ, with ◁VDE▷ testing mark for proven reliability and qualityApplication · Compliant with standards for use in rail vehicles and buses· For fixed installation in ducts and closed installation channels· Flexible use at temperatures down to -25°C· Suitable for wiring inside control cabinets· For wiring circuits inside machines· Can be used in dry rooms
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 10001.5 ~ 300-7 ~ 38---
      Cena (bez VAT) od:
      204.28 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® FD P plus
      • Volume Discount

      LAPP

      UNITRONIC® FD P plus

      Benefits · Relatively small bending radii thanks to highly flexible cable design· Operating voltage of 1000 V according to UL, permitted for North America· Compact design enables small outer diameters despite high number of cores· Durable, resistant product thanks to the outer sheath PU material that is resistant to abrasions, notches and cuts· Low-capacitance core insulation for long transmission paths· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· With conductor cross-sections from 014 mm² for low-frequency data transmission · UL/CSA certification according to technical data enables the product to be used in the North American marketApplication · The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals· The cable design allows highly flexible, continuously flexing use in moving machine parts and in the cable chain, with horizontal travel distances of up to 100 m· Suitable for outdoor use in Europe, in accordance with the temperature range· The PUR outer sheath withstands high mechanical loads· For use in control, regulating and measurement circuits· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· Can be used in dry, wet and especially in harsh and oily environments· Flexible use at temperatures down to -40°C
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 10000.14 ~ 0.34-3.9 ~ 11.9GrayRubber-Based-
      Cena (bez VAT) od:
      138.45 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® LiYY
      • Volume Discount

      LAPP

      UNITRONIC® LiYY

      Benefits · Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Compact design enables small outer diameters despite high number of cores· Numerous dimensions available for wide range of applicationsApplication · The PVC outer sheath is somewhat oil-resistant· Can be used in dry and damp rooms· Suitable for light mechanical stress· Suitable for computer systems, electronic control and regulation devices, office machines, scales, etc· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· For fixed installation
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 10000.14 ~ 1.5-3.2 ~ 15.8GrayPVC (Polyvinyl Chloride)-
      Cena (bez VAT) od:
      25.76 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® SENSOR FD Lif9YC11Y
      • Volume Discount

      LAPP

      UNITRONIC® SENSOR FD Lif9YC11Y

      Benefits · UL certification according to technical data enables the product to be used on the North American market· Durable, resistant product thanks to the outer sheath PU material that is resistant to abrasions, notches and cuts· Highly flexible cable design for maximum mechanical stress· FD-optimised variant with particularly small cable outer diameter thanks to thinner outer sheath · The “FD-screened” variant offers ideal protection against electromagnetic interference thanks to the copper braided screening with a high degree of coverage (F/UTP)· Compact dimensions enable easy integration into the machine conceptApplication · Cable design allows highly flexible, continuously flexing use in moving machine parts and in the cable chain· The PUR outer sheath withstands high mechanical loads· The PU outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals· Can be used in dry, damp and, especially, harsh and oily environments· Suitable for outdoor use, subject to the temperature range
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 25000,34-4,3 ~ 5BlackRubber-Based-
      Cena (bez VAT) od:
      353.31 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Flexible cable H03VV-F
      • Volume Discount

      VOKA KABELWERK

      Flexible cable H03VV-F【100 szt.】

      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      -------
      Cena (bez VAT) od:
      114.37 €
      Standardowa data wysyłki:
      3 dni robocze
      Konfiguruj
    • ÖLFLEX® CHAIN 809 SC CY
      • Volume Discount

      LAPP

      ÖLFLEX® CHAIN 809 SC CY

      Benefits · Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage· Operating voltage of 1000 V according to UL, permitted for North America· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· Durable cable chain use with moderate travel distances or acceleration (LAPP performance class “Basic Line”)· UL/CSA certification according to technical data enables the product to be used in the North American marketApplication · Specially designed for energy circuits of servo motors driven by frequency converters· Can be used in dry, damp or wet environments· Especially for environments where electromagnetic compatibility (EMC) is required· Suitable for light to medium mechanical stress· Suitable for outdoor use, subject to the temperature range· The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance· Cable design also suitable for torsion applications in wind turbines· Also suitable for fixed wiring in control cabinets and in applications where multi-core cables are difficult to use due to space requirements and minimum bending radii· The cable design allows flexible, continuously flexing use in moving machine parts and in the cable chain
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      50 ~ 5006 ~ 300-8,1 ~ 33,5BlackPVC (Polyvinyl Chloride)-
      Cena (bez VAT) od:
      285.66 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • ÖLFLEX® HEAT 205 SC
      • Volume Discount

      LAPP

      ÖLFLEX® HEAT 205 SC

      Benefits · Resistant to contact with mostly all highly aggressive chemical media· Small outer diameters for maximum saving of space and weightApplication · Typical fields of application- Control cabinets with high heat generation- Measuring instruments- Furnaces and brickworks- Heating equipment and kitchen appliances- Electric motor building- Installations in the chemical industry· For use in environments with very high operating temperatures, heavy usage of chemical agents or confined spaces
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 25000,5 ~ 16-1 ~ 6.7---
      Cena (bez VAT) od:
      82.07 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • ÖLFLEX® HEAT 180 SiF A
      • Volume Discount

      LAPP

      ÖLFLEX® HEAT 180 SiF A

      Benefits · Possesses insulating properties after combustion due to remaining SiO2 ash on the conductor· Certified for the USA and Canada for export-oriented machine, appliance and apparatus manufacturersApplication · Areas with high ambient temperatures where conventional core insulation materials will embrittle after a short while· Typical fields of application- Control cabinet manufacturing- Appliances and apparatus engineering- Electric motor industry- Sauna/solarium construction- Thermal and heating elements- Lighting technology- Ventilator engineering- Air-conditioning technology- Furnace construction- Polymer processing- Generator and transformer manufacturing
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 5000,5 ~ 95-2,2 ~ 17,5---
      Cena (bez VAT) od:
      33.67 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • ÖLFLEX® HEAT 260 SC
      • Volume Discount

      LAPP

      ÖLFLEX® HEAT 260 SC

      Benefits · Resistant to contact with mostly all highly aggressive chemical media· Small outer diameters for maximum saving of space and weight· Stress crack resistant to frequent ambient temperature fluctuationsApplication · For use in environments with very high operating temperatures, heavy usage of chemical agents or confined spaces
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 1000-10 ~ 280,9 ~ 3.4---
      Cena (bez VAT) od:
      103.57 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • ÖLFLEX® SPIRAL 400 P
      • Volume Discount

      LAPP

      ÖLFLEX® SPIRAL 400 P

      Benefits · Resistant to contact with many mineral oil-based lubricants, diluted acids, aqueous alkaline solutions and other chemical media· High restoring forces and extension lengths up to 3 times the unextended spiral length· Increased durability under harsh conditions thanks to robust PUR outer sheathApplication · As control and power cables in machines· Mechanical engineering· Apparatus construction
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      -0,75 ~ 2,5-5,4 ~ 13,4GrayRubber-Based-
      Cena (bez VAT) od:
      31.00 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® LiHCH
      • Volume Discount

      LAPP

      UNITRONIC® LiHCH

      Benefits · Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage· With halogen free LSZH outer sheath to meet special fire protection requirements· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Compact design enables small outer diameters despite high number of cores· With conductor cross-sections from 014 mm² for low-frequency data transmission · Core marking according to DIN 47100 colour code for unambiguous identification of the single coresApplication · Can be used in dry and damp rooms· For use in control, regulating and measurement circuits· Especially for environments where electromagnetic compatibility (EMC) is required· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· For occasional flexing
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 10000.14 ~ 1.5-4.1 ~ 12.1GrayOther-
      Cena (bez VAT) od:
      152.76 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® LiYCY A
      • Volume Discount

      LAPP

      UNITRONIC® LiYCY A

      Benefits · Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage· Compact design enables small outer diameters despite high number of cores· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· UL/CSA certification according to technical data enables the product to be used in the North American market· Core marking according to DIN 47100 colour code for unambiguous identification of the single coresApplication · For fixed installation and occasional flexing· Can be used in dry and damp rooms· For use in control, regulating and measurement circuits· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      100 ~ 305-18 ~ 264.3 ~ 11.5GrayPVC (Polyvinyl Chloride)-
      Cena (bez VAT) od:
      127.93 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • UNITRONIC® LiYY A
      • Volume Discount

      LAPP

      UNITRONIC® LiYY A

      Benefits · Compact design enables small outer diameters despite high number of cores· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· UL/CSA certification according to technical data enables the product to be used in the North American market· Core marking according to DIN 47100 colour code for unambiguous identification of the single coresApplication · For fixed installation and occasional flexing· The PVC outer sheath is somewhat oil-resistant· Can be used in dry and damp rooms· For use in control, regulating and measurement circuits· Suitable for light mechanical stress· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range
      Czytaj dalej
      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
      152 ~ 305-19 ~ 263.8 ~ 11.6GrayPVC (Polyvinyl Chloride)-
      Cena (bez VAT) od:
      69.91 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Video Cable

        HELUKABEL

        Video Cable

        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        500 ~ 1000--6.1 ~ 11.8---
        Cena (bez VAT) od:
        647.14 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Ground Straps / Flat Ground Straps
        • Volume Discount

        LAPP

        Ground Straps / Flat Ground Straps

        Application · Control cabinet manufacturing· The protective earth safety measure is prescribed by standard
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        200 ~ 5006 ~ 25-----
        Cena (bez VAT) od:
        2.69 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • H07Z-K 90°C
        • Volume Discount

        LAPP

        H07Z-K 90°C

        Benefits · Different core insulation colours available· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· ◁HAR▷-style cables are widely accepted and can be used in Europe· Compact design for easy processing· Halogen-free core insulation compound as well as low smoke gas emission and low corrosiveness of gases in the event of fire make the cable suitable for use in public areas· Made according to harmonised European type H07Z-K, with ◁HAR▷ testing mark for proven reliability and quality (not applicable for: transparent, green (single colour), yellow (single colour), all double colours (except green/yellow and yellow/green))· Available as ring, on coils or in large disposable cardboard boxes Large cardboard boxes are available depending on the colour and cross-section and generally only up to 6 mm² conductor cross-sectionApplication · Can be used for open installation on cable trays for equipotential bonding · Suitable for wiring inside control cabinets· For wiring lighting· For fixed and protected installation in an electrical installation pipe on or under plaster· Can be used in dry rooms· For operating temperatures from -40°C to +90°C· For wiring machine-internal circuits, subject to special fire protection requirements
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        50 ~ 20001,5 ~ 9510 ~ 163,5 ~ 18.8---
        Cena (bez VAT) od:
        50.37 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • MULTI-STANDARD SC 2.2
        • Volume Discount

        LAPP

        MULTI-STANDARD SC 2.2

        Benefits · Different core insulation colours available· Operating voltage of 1000 V according to UL, permitted for North America· Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· Available as a ring or in a large, disposable cardboard box Large cardboard boxes are available depending on the colour and cross-section and generally only up to 6 mm² conductor cross-section· UL/CSA certification according to technical data enables the product to be used in the North American market· Improved core insulation allows conductor temperatures of up to +90°C and therefore a wide range of applicationsApplication · Can be used in dry and damp rooms· Suitable for wiring inside control cabinets· Use at temperatures up to -40°C possible· For wiring circuits inside machines· For fixed and protected installation
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        50 ~ 20000,5 ~ 9512 ~ 182,7 ~ 18.2---
        Cena (bez VAT) od:
        36.98 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • ÖLFLEX® FD 90 CY
        • Volume Discount

        LAPP

        ÖLFLEX® FD 90 CY

        Benefits · Durable cable chain use with medium travel distances or increased acceleration (LAPP performance class “Core Line”)· Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage· Highly flexible cable design means excellent product performance· Product with multiple certifications enables universal use and reduces the variety of parts, thus guaranteeing logistics savings· UL/CSA certification according to technical data enables the product to be used in the North American marketApplication · Suitable for medium mechanical stress· Specially designed for energy circuits of servo motors driven by frequency converters· For circuits that require a higher nominal voltage due to their installation· The cable design allows flexible, continuously flexing use in moving machine parts and in the cable chain· The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance· Also suitable for fixed wiring in control cabinets and in applications where multi-core cables are difficult to use due to space requirements and minimum bending radii· Can be used in dry, damp or wet interiors
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        50 ~ 50010 ~ 300-9.7 ~ 34.8OrangePVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        390.53 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • ÖLFLEX® HEAT 125 SC
        • Volume Discount

        LAPP

        ÖLFLEX® HEAT 125 SC

        Benefits · Reduction of flame propagation, density and toxicity of smoke gases in event of fire· For safety in areas with high density of people· Certified\xa0for maritime applications· Minimises damage to buildings and equipment caused by the formation of toxic acid fumes in firesApplication · Coil winding, electromagnets, pumps, electrical systems· For the wiring and connection of lighting, heating appliances, control cabinets, and distributors in mechanical and plant engineering· Heat treatment plants, pressure die casting, heating and cooling technology· For installation in tubes, on, in and under plaster as well as in closed installation ducts· Suitable for assembling cable harnesses and wiring during switch cabinet installation
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        50 ~ 30000.5 ~ 185-2.2 ~ 22.5---
        Cena (bez VAT) od:
        53.78 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • ÖLFLEX® TRUCK 170 TWIN
        • Volume Discount

        LAPP

        ÖLFLEX® TRUCK 170 TWIN

        Benefits · Polarity identification is possible without stripping the sheath or external marking (the item designation is always printed on the positive pole) This rules out incorrect connections· No brushing of cores after stripping and therefore optimum subsequent handling, for example when crimping/contacting· Special ADR approvalApplication · Battery cable between the power source and the end user· For commercial verhicles
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        50 ~ 10006 ~ 50--BlackPVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        245.70 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® 100 CY
        • Volume Discount

        LAPP

        UNITRONIC® 100 CY

        Benefits · Resistant to electromagnetic interference thanks to copper braided screening with a high degree of coverage· Additional robustness thanks to the extruded inner sheath (for cables from 025 mm2)· Compact design enables small outer diameters despite high number of cores· With conductor cross-sections from 014 mm² for low-frequency data transmission Application · For fixed installation and occasional flexing without tensile strain· Suitable for computer systems, electronic control and regulation devices, office machines, scales, etc· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· Can be used in dry, damp or wet interiors
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        100 ~ 10000.14 ~ 0.34-3.7 ~ 10.5GrayPVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        125.40 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® 300 / UNITRONIC® 300 S
        • Volume Discount

        LAPP

        UNITRONIC® 300 / UNITRONIC® 300 S

        Benefits · Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring)· Wide application range due to multiple certificationsApplication · Control and signal cables for internal and external wiring· Thanks to the DIRECT BURIAL approval, direct burial of versions with the nominal conductor cross sections 18 AWG and 16 AWG is normatively permitted in the USA· For the North American market· Torsion resistant up to ±150 °/m for the drip loop of wind turbine generators· On the basis of CMG, PLTC or ITC direct laying on cable tray in the USA, in conjunction with -ER (Exposed Run) for unprotected transition sections with a length of not more than 6 ft each
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        152 ~ 3050.5216 ~ 225 ~ 9.9GrayPVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        451.78 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® 300 STP
        • Volume Discount

        LAPP

        UNITRONIC® 300 STP

        Benefits · Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring)· Wide application range due to multiple certifications· Overall braid minimises electrical interference· Decoupling of circuits by means of twisted-pair (TP) design (crosstalk effects)Application · Thanks to the DIRECT BURIAL approval, direct burial of versions with the nominal conductor cross-section 18 AWG in the USA· Control and signal cables for internal and external wiring· For the North American market· Torsion resistant up to ±150 °/m for the drip loop of wind turbine generators· On the basis of CMG, PLTC or ITC direct laying on cable tray in the USA, in conjunction with -ER (Exposed Run) for unprotected transition sections with a length of not more than 6 ft each
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        152 ~ 305-18 ~ 245,1 ~ 14,6GrayPVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        1,368.40 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® LiYD11Y
        • Volume Discount

        LAPP

        UNITRONIC® LiYD11Y

        Benefits · Compact design enables small outer diameters despite high number of cores· Durable, resistant product thanks to the outer sheath PU material that is resistant to abrasions, notches and cuts· Core marking according to DIN 47100 colour code for unambiguous identification of the single coresApplication · The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals· For fixed installation and occasional flexing· Suitable for outdoor use· The PUR outer sheath withstands high mechanical loads· Especially for environments where electromagnetic compatibility (EMC) is required· Suitable for computer systems, electronic control and regulation devices, office machines, scales, etc· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· Can be used in dry, wet and harsh environments
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        100 ~ 10000.14 ~ 0.25-4.1 ~ 8.4BlackRubber-Based-
        Cena (bez VAT) od:
        182.70 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® PUR CP (TP)
        • Volume Discount

        LAPP

        UNITRONIC® PUR CP (TP)

        Benefits · Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage· Compact design enables small outer diameters despite high number of cores· Durable, resistant product thanks to the outer sheath PU material that is resistant to abrasions, notches and cuts· The conductor circuits are well decoupled thanks to the twisted pair (TP) with short lay lengths· Core marking according to DIN 47100 colour code for unambiguous identification of the single coresApplication · The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals· For fixed installation and occasional flexing· Suitable for outdoor use· Can be used in dry, damp or wet environments· The PUR outer sheath withstands high mechanical loads· Suitable for computer systems, electronic control and regulation devices, office machines, scales, etc· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        100 ~ 10000.25 ~ 0.5-6.3 ~ 11.1GrayRubber-Based-
        Cena (bez VAT) od:
        334.20 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® RE-2Y(ST)Yv
        • Volume Discount

        LAPP

        UNITRONIC® RE-2Y(ST)Yv

        Benefits · Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Very robust due to reinforced outer sheath with a wall thickness of at least 18 mm· The conductor circuits are well decoupled thanks to the twisted pair (TP) with short lay lengthsApplication · Can be used in dry and damp environments· For use in control, regulating and measurement circuits· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· Black versions are suitable for outdoor use
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        100 ~ 50000.5 ~ 1.3-7.2 ~ 27.5Black / BluePVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        92.23 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • UNITRONIC® RE-2Y(ST)Yv PiMF
        • Volume Discount

        LAPP

        UNITRONIC® RE-2Y(ST)Yv PiMF

        Benefits · Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Very robust due to reinforced outer sheath with a wall thickness of at least 18 mm· The conductor circuits are well decoupled thanks to the twisted pair (TP) with short lay lengthsApplication · Can be used in dry and damp environments· For use in control, regulating and measurement circuits· Can be used universally at machine interfaces for many applications for data and signal transmission in the low-frequency range· Black versions are suitable for outdoor use
        Czytaj dalej
        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        100 ~ 10000.5 ~ 1.3-10 ~ 22.2Black / BluePVC (Polyvinyl Chloride)-
        Cena (bez VAT) od:
        199.66 €
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • Block Enamel-coated copper wire
        • Volume Discount

        BLOCK

        Block Enamel-coated copper wire

        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        -------
        Cena (bez VAT) od:
        12.67 €
        Standardowa data wysyłki:
        3 dni robocze
        Konfiguruj
      • Cu-Braid, fine strands
        • Volume Discount

        HUBER+SUHNER

        Cu-Braid, fine strands

        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        -------
        Cena (bez VAT) od:
        1.33 €
        Standardowa data wysyłki:
        3 dni robocze
        Konfiguruj
      • Spiral cable
        • Volume Discount

        TRU COMPONENTS

        Spiral cable

        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
        -------
        Cena (bez VAT) od:
        5.01 €
        Standardowa data wysyłki:
        3 dni robocze
        Konfiguruj
      • Data & Computer Cables  PVC Pair TRONIC

          HELUKABEL

          Data & Computer Cables PVC Pair TRONIC

          Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
          100 ~ 10000.14 ~ 0.75-3.6 ~ 14GrayPVC (Polyvinyl Chloride)PVC (Polyvinyl Chloride)
          Cena (bez VAT) od:
          52.74 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Data & Computer Cables  PVC screened Pair TRONIC CY

            HELUKABEL

            Data & Computer Cables PVC screened Pair TRONIC CY

            Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
            50 ~ 10000.14 ~ 1.5-4.4 ~ 23.2GrayPVC (Polyvinyl Chloride)PVC (Polyvinyl Chloride)
            Cena (bez VAT) od:
            64.91 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Data & Computer Cables  PVC screened Pair TRONIC Li 2YCY black

              HELUKABEL

              Data & Computer Cables PVC screened Pair TRONIC Li 2YCY black

              Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
              500 ~ 10000.22 ~ 1-7.8 ~ 16.1BlackPVC (Polyvinyl Chloride)Polyethylene-Based
              Cena (bez VAT) od:
              796.61 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Loudspeaker Cable

                HELUKABEL

                Loudspeaker Cable

                Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                50 ~ 1000------
                Cena (bez VAT) od:
                69.74 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Single Core  SILICONE / RUBBER halogen free  FZLS

                  HELUKABEL

                  Single Core SILICONE / RUBBER halogen free FZLS

                  Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                  100--5 ~ 7---
                  Cena (bez VAT) od:
                  173.07 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • Single Core PVC ESUY

                    HELUKABEL

                    Single Core PVC ESUY

                    Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                    500 ~ 1000--8.3 ~ 19.8---
                    Cena (bez VAT) od:
                    5,192.24 €
                    Standardowa data wysyłki:
                    5 dni robocze
                    Konfiguruj
                  • Single Core SILICONE / RUBBER halogen free  FZ Lsi

                      HELUKABEL

                      Single Core SILICONE / RUBBER halogen free FZ Lsi

                      Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                      100--7.5 ~ 8.5---
                      Cena (bez VAT) od:
                      430.88 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • Data & Computer Cables  PVC screened Pair TRONIC Li 2YCY grey

                        HELUKABEL

                        Data & Computer Cables PVC screened Pair TRONIC Li 2YCY grey

                        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                        500 ~ 10000.22 ~ 0.5-5.5 ~ 12.8GrayPVC (Polyvinyl Chloride)Polyethylene-Based
                        Cena (bez VAT) od:
                        607.09 €
                        Standardowa data wysyłki:
                        5 dni robocze
                        Konfiguruj
                      • ESUY Copper Earthing Cable
                        • Volume Discount

                        LAPP

                        ESUY Copper Earthing Cable

                        Benefits · Very flexible despite a large cross-sectionApplication · For earthing devices and potential equalisation on machine parts and EDP systems· Provides protection during repairs· For earthing in high-voltage power installations of power companies and railway systems
                        Czytaj dalej
                        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                        50016 ~ 95-8.8 ~ 19.8---
                        Cena (bez VAT) od:
                        4,723.14 €
                        Standardowa data wysyłki:
                        5 dni robocze
                        Konfiguruj
                      • H05V-K in big one-way cardboard box
                        • Volume Discount

                        LAPP

                        H05V-K in big one-way cardboard box

                        Benefits · Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website· Ideal for automated cable assembly in large volumes· Also available as ring or on coils· ◁HAR▷-style cables are widely accepted and can be used in Europe· Made in accordance with harmonised European design H05V-K, with ◁HAR▷testing mark for proven reliability and quality· Embossed cable for individual, permanent reprintingApplication · Can be used for open installation on cable trays for equipotential bonding · Use at temperatures up to -40°C possible· For wiring circuits inside machines· For fixed and protected installation· For wiring lighting
                        Czytaj dalej
                        Overall Length(m)Conductor Cross Section(mm2)AWG size(AWG)Finished outer diameter(mm)Sheath (outer coating) colorSheath (outer coating) materialInsulation body materials
                        2000 ~ 90000,5 ~ 118 ~ 222,5 ~ 2.8---
                        Cena (bez VAT) od:
                        483.66 €
                        Standardowa data wysyłki:
                        5 dni robocze
                        Konfiguruj