Insulated Supports

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 13 Days or Less

?* Information on days to ship and prices

• 

  Insulated Support Stand【6 Pieces Per Package】

  MISUMI

  A wide variety of variations. [Features] An insulated support for copper rails. -Standard type: M6 or M8 nut-to-nut, bolt-to-nut type -Panel direct mount type: M5 bolt-to-nut type -The panel direct mount type has a shorter bolt part so that it can be connected together when a fixed height is required.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PP Holder, G Type【25-50 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used to maintain insulation wiring within a high-pressure device. Secured using a cable tie.
  
  [Features]
  · Possible to easily and firmly maintain wiring via tightening with a cable band.
  · A total of three different types of varying heights are available for use with your preferred application.
  · Has excellent insulating properties, is lightweight, and won’t crack.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	73.51 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  PP Holders【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the PP holders for retaining insulated wires on the inside of high-voltage equipment.
  
  [Features]
  · The PP holders can fully secure wires by tightening a single screw due to their hinged opening and closing type clamp covers.
  · By using the adapters, wires of various sizes can be fully protected and supported.
  · Has excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and won’t crack.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Insulating Bushings【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Insulating support bases that can be used for floating insulation for sequencers, etc.
  [Features]
  · PP (black) *Specification altered from white Duracon.
  A set of both protruding and depressed types, ensuring that the base parts of equipment can be insulated.
  Can be used with M4, M5, M6, M8, M10 and M12 bolts.
  [Applications]
  For floated insulation on the bases of various types of equipment, sequencers and inverters.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	63.51 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Insulating Bushes

  FISCHER ELEKTRONIK

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Insulating Caps, SR 25

  FISCHER ELEKTRONIK

  For single-semiconductors, UL 94 V-0

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Insulating support【50 Pieces Per Package】

  KASUGA ELECTRIC

  Convenient for supporting the main and branch bars. Optimal as an accessory to aid layout inside the panel.

  Select to compare

  Configure now
  Starting from∗ ：	158.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Insulating support, fit-direct-to-panel type【50 Pieces Per Package】

  KASUGA ELECTRIC

  Convenient for supporting the main and branch bars. This product attaches directly to the panel and is optimal as an accessory to aid layout inside the panel.

  Select to compare

  Configure now
  Starting from∗ ：	159.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  FRP Cleat

  SHINOHARA ELECTRIC

  Please use as a mother wire support mount. Made by FRP
  
  [Features]
  ・FRP materials are used as the machining material for a light weight.
  ・Does not rust.
  ・Strong
  ・Good insulation.
  · Machining can easily be performed.
  ・Good resistance to water absorption.
  · Has superior arc resistance.
  ・There is no need for post-machining treatment like with Bakelite.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.91 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Bar holder【50-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the bus bar to support insulation.
  
  [Features]
  · The copper band and bar holder S are secured and tightened with a mounting bolt for a wide range of band thicknesses.
  · Reduced manual work compared to conventional insulation materials.
  · Copper bands can be mounted from both surfaces in a row by inserting the separator into the interstitial space.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	361.11 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Resin Insulator【50 Pieces Per Package】

  SHINOHARA ELECTRIC

  A high-pressure insulating support.
  
  [Features]
  · Smaller and lighter than conventional porcelain insulators, with excellent durability. Useful for streamlining.
  Features excellent electrical and mechanical properties.
  · Produced in accordance with JIS standards (JIS-C3851).

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	774.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Three-Stage Support Base【1-25 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as a bus support base. Achieves space savings with three-stage design.
  
  [Features]
  · Can easily support a copper band by simple insertion of square nut(s).
  · Resin molding ensures that the product is lightweight and will not crack.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Branching Bus Support Base

  SHINOHARA ELECTRIC

  Use to support bus lines
  
  [Features]
  · No need to manually treat insulation like before.
  · Made of lightweight, non-breakable plastic.
  · Excellent insulation (for low voltages)

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mounting Bracket for Indoor Supporting Insulator

  SHINOHARA ELECTRIC

  Can be used as a mounting bracket for indoor support insulators used in bus bars and wires.
  
  [Features]
  - A wide array of different sizes designed to match various mounting hole pitches used for indoor support insulators are available.
  - Different models can be selected based on the intended application, such as a clamp for round wires (high pressure covered wires) or a clamp for bus bar use (vertical support/horizontal support).

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  EP Holders【80-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the emergency power holders for retaining the insulated wires on the inside of high-voltage equipment. This type of holder is secured by bolts on both sides.
  
  [Features]
  · This product has been manufactured based on the criteria that have been established in the guidelines for certification of electrical equipment receiving cubicle-type, dedicated, emergency power supply, enacted by the Japan Electric Association.
  · By using the adapters, wires of 5.5–250 ksi can be fully secured.
  · Excellent insulating properties (creepage plugs-circuit voltage of 22 kV or more), is lightweight, and will not crack.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	48.10 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  EI Supporters

  SHINOHARA ELECTRIC

  Use the EI supporters to support the conductors on the inside of low-voltage equipment. The supporters are manufactured from epoxy resin.
  
  [Features]
  · The load-bearing capacity is superior to that of conventional supporters. Therefore, the scope of application has been expanded further.
  · Has excellent insulating properties, is lightweight, and won’t crack.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.92 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  WS Wire Supporter

  SHINOHARA ELECTRIC

  Use as a wire support base
  
  [Features]
  · Three types, from WS-1 to WS-3. Combine WS-1 with WS-2 to support a wide variety of electrical lines

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.90 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Free Cleat Mount

  SHINOHARA ELECTRIC

  Use the free cleat mount for damping wire vibrations.
  
  [Features]
  · Holes have been drilled into the extruded resin material at 20 mm intervals.
  · Cables can be simply supported at intermediate locations by using zip ties.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.23 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  20Stage support mount【25 Pieces Per Package】

  SHINOHARA ELECTRIC

  Please use as an ELB ground support mount.
  
  [Features]
  ・By arranging copper bus bars on 2 vertical levels, particularly when ELB and general purpose ground bars need to be distinguished, this product can be used in the ELB vicinity within a small space so as to install 2 ground bars.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	129.37 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Sloped Bus Support Base【1-10 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as a bus support base (sloped bus support base)
  
  [Features]
  · The sloped bus makes wire connection work easy.
  · Allows for a reduction in mounting space.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Bus Bar Supporters【20 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the polycarbonate bus bar supporters as supports for bus bars.
  
  [Features]
  · Copper strips can be supported by simply sandwiching the tops and bottoms of the strips.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	184.58 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Bushings

  FISCHER ELEKTRONIK

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Insulating Caps, Fluoropolymer

  FISCHER ELEKTRONIK

  For single-semiconductors, UL 94 V-0

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Insulating Clamping Part

  FISCHER ELEKTRONIK

  For semiconductor

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Mounting Kits for Insulation of Power Transistors, MST Series

  FISCHER ELEKTRONIK

  For semiconductor-design TO 220

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

Loading...