An energy saving, long life, and maintenance-free LED rotating light with integrated high quality MP3 audio synthesis. Produces a maximum volume of 95 dB (at 1 m). No sound sources (MP3 data) included. Please prepare separately.
[Features] · Features built-in MP3 audio synthesis and an LED rotating light. · Uses MP3 technology for high-quality and clear message playback. Messages can be easily rewritten using the audio programming tool FV-Win (sold separately) and an SD card (sold separately). · Boasts greater energy-saving performance and a longer service life than light bulb types. The LED light source reduces maintenance as there is no need to replace dead bulbs. Gives stable light over long periods. · The rotation mechanism uses a gear system. This prevents idling due to the belt wearing out, etc. Can also be used in emergency applications in which rotation is not normally used. · Boasts a maximum volume of 95dB (at 1 m). The built-in control enables the volume to be adjusted. · Tasks such as changing the settings or rewriting messages can be performed while the product is installed without having to remove the side covers. · The built-in test switches enable easy operation of the product and facilitate easy configuration of the settings during installation such as volume adjustment etc. · Switch the operation mode to set to bit input (four channels) or binary input (15 channels). · The sound can be reduced by approximately 15dB via the sound reduction input. · The combination of a timer and sensor allow noise reduction for use during nighttime. · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc. · Boasts a protection grade of IP54 and can even be used outdoors (with forwards mounting)
A best-selling small rotating light. Compatible with a wide range of applications.
[Features] · A best-seller rotating light that is usable in a wide range of applications. · Uses easy-to-obtain automobile light bulbs that are able to withstand vibration. · Uses a small motor for a longer service life, higher durability, and greater energy saving performance. · A sturdy metal body with strong durability.
A large, maintenance-free rotating light that uses LEDs as its light source, enabling use in harsh environments.
[Features] · Boasts a long service life through the use of an LED light source, a brushless motor, and gears that use bearings. Uses a long-life brushless DC motor for an approximate service life five times that of existing rotating lights. The rotation mechanism uses gears with bearings, ensuring that the rotation performance remains stable. Uses LEDs for the light source, so there is no worry of it burning out. This helps greatly reduce maintenance work such as the replacing of light bulbs and motors, etc. Furthermore, the all-plastic body is made using polycarbonate resin, giving excellent impact and heat resistance while also preventing rusting. An energy saving, long life, high durability, and environmentally-friendly product. · Vibration-resistant performance that is able to withstand vibrations of 11.2 G (*except RLR-M2). Uses newly-developed vibration-proof rubber feet, making it strong against vibration. Delivers stable operation, even at vibrations of 11.2 G. · The two high-power LED light sources at the top and bottom and the new reflector ensure high visibility. Equipped with two high-power LED light sources, one at the top and one at the bottom. The newly-developed reflector reflects each of these light sources over a wide area with excellent brightness, greatly increasing the area of exposure for each of the LED light sources. · The use of energy-saving and long-life LED light sources greatly reduces both the amount of current consumed and the power load. · The dust and water-proofed structure prevents water from entering from any direction, even with powerful jet streams (protection grade IP66).
Built-in high-quality electronic sound. An energy saving and maintenance-free integrated LED rotating light with a long service life.
[Features] · Boasts greater energy-saving performance and a longer service life than light bulb types. The LED light source reduces maintenance as there is no need to replace dead bulbs. Gives stable light over long periods. · The rotation mechanism uses a gear system. · This prevents idling due to the belt wearing out, etc. Can also be used in emergency applications in which rotation is not normally used. · Produces a loud volume of up to 90dB (at 1 m). The volume can be adjusted using the built-in volume control. · Tasks such as changing the settings can be performed while the product is installed without having to remove the side covers. · Features a built-in test switch.
A flashing LED display light with a refined design. Uses a triple-flash method for high visibility even from afar.
[Features] · Colors: red, yellow, green, blue, white. · Globe: Polycarbonate resin with excellent shock and heat resistance. · Outstanding visibility even outdoors and from afar. A high-luminance LED flashing display light. · Eligible for free repairs for three years after purchase. A highly-reliable and high quality maintenance-free design. · A specification with two variations on the number of flashes. Complies with various standards. · The bottom of the main body is square shaped, allowing installation pretty much anywhere. Boasts excellent vibration resistance as well as being both dust and water-proofed. · Equipped as standard with light-reducing functionality for preventing glare from up close or during the night. · The anti-vibration functionality provides stable lighting, even when installed to locations subject to constant vibration. · Boasts mounting pitch compatibility with existing products. · UL Listed (File no. S24210) (except LFH-S).