Rockwell Diamond Indenter (Part Numbers)

Mitutoyo indenters for Rockwell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers. The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.Constant development at our calibration partners secures an unmatched quality level. Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available. Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
63DIA002
63DIA007

Part Number	Related to	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Accreditation Standard	Additional Spec	Collar Diameter (mm)	Collar Thickness (mm)	Cone Angle (degree)	Function Test	Indenter Diameter (mm)	Material	Method	Product Line	Shaft Length (mm)	Shaft Diameter (mm)	Tip Radius	Total Length (mm)	Type	Usable Length (mm)
	Data sheet	418.42 €	1		60 Days	-	Conforming to ISO 6508-2	-	-	-	Without	-	-	-	-	-	-	-	-	-	-
	Data sheet	561.84 €	1		60 Days	ISO 17025	Conforming to ISO 6508-2	-	-	120	Without	10	diamond	Rockwell	HR-500	10	6.35	0.2	15	Diamond cone indenter	5

Basic information

Product Type	Hardness Check	Accreditation Body	DAkkS	Calibration	with

Configure

2Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Accreditation Standard
- ISO 17025
Clear
Collar Diameter(mm)
- 10
- 12
- 13.5
Clear
Collar Thickness(mm)
- 3
Clear
Cone Angle(degree)
- 120
Clear
Indenter Diameter(mm)
- 6
- 6.5
- 10
Clear
Material
- diamond
Clear
Method
- Rockwell
Clear
Product Line
- HR-500
- HR-100. HR-200. HR-300. HR-400. HR-500. HR-600. AR-10. AR-20ARK
- HR-100. HR-200. HR-300. HR-400. HR-500. AR-10. AR-20. ARK
- HR-100. HR-200. HR-300. HR-400. AR-10. AR-20. ARK
Clear
Shaft Length(mm)
- 10
- 11
- 12
- 18
Clear
Shaft Diameter(mm)
- 6.34
- 6.35
Clear
Tip Radius
- 0.2
Clear
Total Length(mm)
- 15
- 27
- 29
- 46
Clear
Type
- Diamond cone indenter
Clear
Usable Length(mm)
- 5
- 16
- 17
- 28
Clear
Type
Clear
Additional Spec
Conforming to ASTM E18 Class B

Conforming to ISO 6508-2

Conforming to ISO 6508-2 and function test acc. to table 4 ISO 6508-2
Clear
Function Test
- Without
- Yes
Clear