QS Holding System for CoroCut XS Bit
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| QS-SMALL1212E3 |
| QS-SMALR1010E3 |
| QS-SMALR1010E-X |
| QS-SMALR1212E-X |
| QS-SMALR1616E3 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Cutting Direction | Shank height (mm) | Dimension B (mm) | Dimensions f2 (mm) | Dimension H1 (mm) | Usable length (mm) | Gauge Chip | Dimensions/f1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
175.61 € | 1 | 8 Days | Left-hand | 12 | 12 | - | 12 | - | MAxL 3.. | 12 | ||
175.61 € | 1 | 8 Days | Right-hand | 10 | 10 | - | 10 | - | MAxL 3.. | 10 | ||
175.61 € | 1 | 8 Days | Right-hand | 10 | 10 | 7.5 | 10 | 20 | MAxR 3.. | 10 | ||
174.29 € | 1 | 6 Days | Right-hand | 12 | 12 | 7.5 | 12 | 20 | MAxR 3.. | 12 | ||
175.61 € | 1 | 6 Days | Right-hand | 16 | 16 | - | 16 | - | MAxL 3.. | 16 |
Loading...
Basic information
| Application | Outer Diameter Grooving / Cutting off | Groove Width(mm) | 0.7-2.0 | Number of corners for tip use | 2 Corner |
|---|---|---|---|---|---|
| Dimension L3(mm) | 27 | Tip tightening torque(Nm) | 1.2 | Overall Length(mm) | 70 |
| Tip Size | 3 |
Configure
Basic Attributes
-
Cutting Direction
- Right-hand
- Left-hand
-
Shank height(mm)
-
Dimension B(mm)
-
Dimensions f2(mm)
- 7.5
-
Dimension H1(mm)
-
Usable length(mm)
-
Gauge Chip
-
Type
- QS-SMALR/L
- QS-SMALR/L-X
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.