Keyless Chuck (Part Numbers)
No chuck is required so that simple manual turning allows attaching and removing of the drill.
An internal design in which gripping force naturally increases as centrifugal force is generated in a spindle rotation direction.
Used to attach drills, generally attaching to the drilling machine, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
KL-130N
Basic information
| Product Category | Attachments/Accessories | Outer Diameter(mm) | 50.5 | Overall Length(mm) | 105 |
|---|---|---|---|---|---|
| Trusco Code | 150-7516 | Mass(g) | 1030 | Features | The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone. It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction. Mainly used mounted on lathes to mount a drill. |
| Gripping ability(mm) | 0.5～13 | Accuracy(mm) | 0.05 | Connection Taper | JT6 |
| Specifications | Runout Accuracy 5/100 mm or Less / |
This page is Keyless Chuck, part number KL-130N.
You can find the detail information about specifications and dimensions on part number KL-130N.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.