Pull Thread Type MT Shank New Drill Mill Chuck
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| M3M-NDC13-50 |
| M4M-NDC13-45 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Retainable blade diameter (mm) | Nut Outer Diameter D (mm) | Full length L1 (mm) | Length from Standard Diameter L1 (mm) | Morse Taper | Mass (g) | Supported collets | Supported wrenches | Wrench Hook Width H (mm) | H part OD φ/length (mm) | Pulling screw g | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
132.19 € | 1 | 8 Days | 0.5～13.0 | 36 | 131 | 50 | MT3 | 340 | YCC13 | FS36 | 27 | Outer Diameter (φ):31/Length: 13 | M12×1.75 | ||
133.34 € | 1 | 6 Days | 0.5～13.0 | 36 | 147.5 | 45 | MT4 | 560 | YCC13 | FS36 | 27 | Outer Diameter (φ):31/Length: 13 | M16×2 |
Loading...
Basic information
| Product Category | Main Body | Applicable Manufacturing Machinery (main unit) | Generic Machine |
|---|
Configure
Basic Attributes
-
Nut Outer Diameter D(mm)
- 22
- 33
- 36
- 42
- 52
-
Full length L1(mm)
-
Length from Standard Diameter L1(mm)
- 45
- 50
- 55
- 70
-
Morse Taper
- MT2
- MT3
- MT4
-
Mass(g)
-
Supported collets
- YCC7
- YCC10
- YCC13
- YCC16
- YCC20
-
Supported wrenches
-
Wrench Hook Width H(mm)
-
Type
- NDC
-
Retainable blade diameter(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.