Extractor (Square Model)
[Characteristics]
For removing broken bolts and pipes.
The angle shape can be used with both left and right bolts and screws.
Type that can be used with right or left-handed screws.
When the plus or minus grooves on screw heads become stripped.
To remove hexagonal bolts with crushed head corners, or bolts that have been broken off half way.
For removing broken bolts and pipes.
For removing broken bolts and pipes.
The angle shape can be used with both left and right bolts and screws.
Type that can be used with right or left-handed screws.
When the plus or minus grooves on screw heads become stripped.
To remove hexagonal bolts with crushed head corners, or bolts that have been broken off half way.
For removing broken bolts and pipes.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
EX-802K
Basic information
| Tap Type | Modification/removal Tool | Overall Length L(mm) | 60 | Original Diameter(mm) | 5.6 |
|---|---|---|---|---|---|
| Dimensions of pilot hole for bolt to use(mm) | 3.3 | Tip diameter(mm) | 2.5 | Compatible Tap Handle | TH-6 |
| Used Bolt Screw(mm) | 6.4~8.0 | Trusco Code | 231-8717 | Mass(g) | 10 |
| Application | When the plus or minus groove in the head of a machine screw is damaged | Application 2 | For removal of hex bolts with crushed head or broken bolts | Application 3 | For extracting folded bolts and pipes |
| Specifications | Applicable to both Left and Right Bolt Screw | Material | Medium carbon steel (S45C) |
This page is Extractor (Square Model), part number EX-802K.
You can find the detail information about specifications and dimensions on part number EX-802K.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.