Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT
- Volume Discount
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| CPM-LT-POT-M12X1.5X150 |
| CPM-LT-POT-M12X1.75X150 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Nominal | Pitch, Number of Threading (mm) | Length under neck (mm) | Shank diameter (mm) | Thread Length (mm) | Tool No. | |
|---|---|---|---|---|---|---|---|---|---|---|
58.98 € | 1 | Available | 6 Days | M12 | 1.5 | 48 | 8.5 | 29 | 78647 | |
58.98 € | 1 | Available | 6 Days | M12 | 1.75 | 48 | 8.5 | 29 | 78643 |
Loading...
Basic information
| Screw Types | Meter | Chamfer threads | 5P | Tool Material Type | Powder high-speed steel |
|---|---|---|---|---|---|
| Work material | High Carbon Steel (C with a content over 0.45%) / Quenched and tempered steel (25 to 35 HRC) / Quenched and tempered steel (35 to 45 HRC) / Tool Steel (Before SKD Hardening) / Steel casting (SC) / Cast Iron (FC) / Ductile Cast Iron (FCD) / Titanium Alloy (Ti-6Al-4V, etc) / Nickel-based alloy (Inconel, etc.) | Tap Type | Point tap | Hole type | For through hole |
| Coating Y/N | N/A | Coating Type | Non-Coated | L(mm) | 150 |
| Accuracy | OH3 | Number of Grooves | 3 | Protrusion | Available |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.