TAC Mill EPS/TPS Insert (Part Numbers)
- Volume Discount
(i)Remark
- · "3D-Detail" is applied when the customer creates 3-dimensional data such as tooling charts.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Work material | Material Classification | Material type | Accuracy | Honing | Dimension A (mm) | Dimension B (mm) | Insert Shape | Cutter Used | Dimension T (mm) | Dimensions rε (mm) | Dimension S (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
16.71 € | 10 | 6 Days | Non-ferrous metal | DLC Coated | DS1100 | G | NA | 11.6 | 6.7 | Figure 3 | EPS11 TPS11 | 3.7 | 0.4 | - | ||
15.11 € | 10 | 10 Days | Non-ferrous metal | Carbide | KS05F | G | NA | 11.6 | 6.7 | Figure 3 | EPS11 TPS11 | 3.7 | 0.4 | - | ||
16.71 € | 10 | 6 Days | Non-ferrous metal | DLC Coated | DS1100 | G | NA | 11.6 | 6.7 | Figure 3 | EPS11 TPS11 | 3.7 | 0.8 | - | ||
15.11 € | 10 | 6 Days | Non-ferrous metal | Carbide | KS05F | G | NA | 11.6 | 6.7 | Figure 3 | EPS11 TPS11 | 3.7 | 0.8 | - | ||
20.59 € | 10 | 6 Days | Non-ferrous metal | DLC Coated | DS1100 | G | NA | 16.9 | 9.8 | - | EPS17 TPS17 | - | 0.4 | 5.6 | ||
18.89 € | 10 | 6 Days | Non-ferrous metal | Carbide | KS05F | G | NA | 16.9 | 9.8 | - | EPS17 TPS17 | - | 0.4 | 5.6 | ||
20.59 € | 10 | 6 Days | Non-ferrous metal | DLC Coated | DS1100 | G | NA | 16.9 | 9.8 | - | EPS17 TPS17 | - | 0.8 | 5.6 | ||
18.89 € | 10 | 6 Days | Non-ferrous metal | Carbide | KS05F | G | NA | 16.9 | 9.8 | - | EPS17 TPS17 | - | 0.8 | 5.6 |
Loading...
Basic information
| Shape (initial letter of model number) | A (85° parallelogram) | Clearance angle | Other | Available corners | 2 |
|---|---|---|---|---|---|
| Quantity of units ordered(piece) | 10 |
Configure
Basic Attributes
-
Material Classification
- Carbide
- Cermet
- Coating
- DLC Coated
-
Material type
-
Accuracy
- G
- M
-
Honing
- Available
- NA
-
Dimension A(mm)
-
Dimension B(mm)
-
Insert Shape
-
Cutter Used
- EPS11 TPS11
- EPS17 TPS17
-
Dimension T(mm)
-
Dimensions rε(mm)
-
Type
- ASGT□□□□□□PDFR-AJ
- ASMT□□□□□□PDPR-MJ
- ASMT□□□□□□PDPR-MS
-
Work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Difficult-to-cut material
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
- 10 Days or Less
Optional Attributes
- [Information concerning ordering unit quantity] The ordering unit quantity is 10 pieces.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.