Potwierdzono
- Screw Nominal(inch)
- d2(inch)
- 0.64
- d3(inch)
- 1.378
- d4(inch)
- 2.323
- d5(inch)
- 1.969
- l1(inch)
- 0.866
- l2(inch)
- 1.181
- l3(inch)
- 1.437
- l4(inch)
- 2.902
- l5(inch)
- 2.189
- l6(inch)
- 2.756
- l7(inch)
- 4.016
- l8(inch)
- 6.594
- l9(inch)
- 2.323
- l10(inch)
- 0.669
- F1(lbf)
- 3619.0
- F2(lbf)
- 1731.0
- F3(lbf)
- 1124.0
- Tightening torque max.(lbf ft)
- 2.21
- Pin part
- Shackle
- Locating thread(inch)
- CAD
- 3D
- Szacowane dni wysyłki
- Wszystko
- W ciągu 4 dni robocze
Threaded Lifting Pins, self-locking, with rotatable shackle - INCH (2B353.0020)
Szczegółowe informacje
Podstawowe informacje
Material
Pin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardened
Press button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571
Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.
Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.
Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.
Notes
- • This product is manufactured in INCH dimensions.
Katalog
Numer części został potwierdzony