Warunki filtrowania
- Screw Nominal (M)
- d2(mm)
- 8.35
- d3(mm)
- 21.5
- d4(mm)
- 10.2
- l1(mm)
- 16
- l2(mm)
- 20.0
- l3(mm)
- 22.9
- l4(mm)
- 36.4
- l5(mm)
- 27
- l6(mm)
- 30
- l7(mm)
- 49
- l8(mm)
- 83.6
- l9(mm)
- 21.5
- l10(mm)
- 10.0
- F1(kN)
- 3.9
- F2(kN)
- 1.5
- F3(kN)
- 1.5
- Locating thread(mm)
- CAD
- 3D
- Szacowane dni wysyłki
- Wszystko
- W ciągu 3 dni robocze
- W ciągu 4 dni robocze
Threaded Lifting Pins, self-locking, for centre holes according to DIN 332
Numer części:
.Lista numerów części
Liczba pozycji
| Numer części |
|---|
Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem) | Standardowa data wysyłki |
|---|
196.80 € ( 234.19 € ) | 3 dni robocze |
256.76 € ( 305.54 € ) | 4 dni robocze |
Szczegółowe informacje
Podstawowe informacje
Material
Pin part
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4542, precipitation-hardened
Press button
- • Aluminium, orange, anodised
Threaded element
- • Stainless steel 1.4542, precipitation-hardened
Shackle
- • Heat-treated steel, tempered, manganese phosphated
• Stainless steel 1.4571
Spring
- • Stainless Steel
Assembly
Threaded lifting pins can be mounted into a thread that is true to gauge.
Mounting:
- • Press in the button and hold it down.
• Insert the threaded lifting pin.
• Release the button (The button must be back in its original position.).
• Tighten the threaded lifting pin by hand, until it bears compleately on the bearing surface.
• It must be ensured that the threaded segments are engaged in the mounting thread.
Dismantling:
- • Unscrew the threaded lifting pin approx. a quarter of a turn anticlockwise.
• Press in the button and hold it down.
• Remove the threaded lifting pin.
• Release the button.
Operation
Each threaded lifting pin contains an instruction manual with an EC Declaration of Conformity.