Roller runner block / Steel (R18516222X)

Volume Discount

BOSCH REXROTH

Product Details:

Manufacturer part number: R18516222X

Brand: BOSCH REXROTH

Price: 892.67 €

Delivery time: 70 Days

Technical Data:

Block Type: [Wide] FNS - Flange, normal, standard height

Rail Width: 63 mm

Mounting Height H: 90 mm

Nominal Part Number: 65

Basic Load Rating: Dynamic Load: 237200 N

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

R18516222X

Product specification
Part Numbers
Catalog

RSHP Roller runner block made of steel

Characteristic features
▶ RSHP roller runner blocks are suitable for all typical applications as well as for special installation and environmental conditions and conditions of use,
so that additional special designs are not necessary.
▶ High torque load capacity
▶ Same high load capacity in all four directions of loading
▶ Maximum rigidity in all load directions due to additional screw connections on two bore holes in the center of the roller runner block
▶ Unrestricted interchangeability
▶ All roller guide rail versions can be combined arbitrarily with all roller runner block versions
▶ Accessories can be screwed down to the front of the roller runner block.

Identification system of material numbers

Formats of high-precision roller runner blocks

FNS – Flanged, normal, standard height

FLS – Flanged, long, standard height

SNS – Slimline, normal, standard height

SLS – Slimline, long, standard height

SNH – Slimline, normal, high

SLH – Slimline, long, high

FNS – Flanged, normal, standard height R1851 ... 2.

Features and Ordering

Dynamic characteristics
Travel speed: v_max = 4 m/s
Acceleration: a_max = 150 m/s²

Recommended combination based on preload and accuracy class
▶ For preload C2: H and P (preferably)
▶ For preload C3: P and SP

Material numbers

Size	Roller runner block with size	Preload class		Accuracy class				Seals
Size	Roller runner block with size	C2	C3	H	P	SP	UP	DS	LS	SS	AS¹⁾
25	R1851 2	2		3	2	1	9	2X	–	–	–
25	R1851 2		3		2	1	9	2X	–	–	–
35	R1851 3	2		3	2	1	9	2X	25	24	2A
35	R1851 3		3		2	1	9	2X	25	24	2A
45	R1851 4	2		3	2	1	9	2X	25	24	2A
45	R1851 4		3		2	1	9	2X	25	24	2A
55	R1851 5	2		3	2	1	9	2X	–	–	2A
55	R1851 5		3		2	1	9	2X	–	–	2A
65	R1851 6	2		3	2	1	9	2X	–	–	–
65	R1851 6		3		2	1	9	2X	–	–	–

1) With integrated DS seal

Preload classes
C2 = Average preload
C3 = High preload
C1, C4, C5 upon request

Seals
DS = Double-lip seal
LS = Low-friction seal
SS = Standard seal
AS = Longitudinal seal

Order example
Options:
▶ Roller runner block FNS
▶ Size 35
▶ Preload class C2
▶ Accuracy class H
▶ With double-lip seal 2X
Material number: R1851 323 2X

Dimensional Drawing and Specifications


		a) For O-ring Size 25: Ø 5 · 1.5 (mm) Sizes 35 to 65: Ø 7 · 1.5 (mm) Open lube port if necessary (see section entitled "Lubrication"). b) Recommended position for pin holes (E4 dimensions, see section entitled "Instruction for mounting", segment "Pinned fitting"). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out. c) Lube nipple, thread M6 – 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors. d) For roller guide rails of accuracy class H, this base area may be without a groove for manufacturing reasons. e) Sealing plugs may be present at this position for manufacturing reasons. Remove before mounting. f) Runner blocks size 55 and 65 without coating and AS seal.

Dimensions (mm)

Size	A	A₁	A₂	A₃	A₄¹⁾	B	B₁	E₁	E₂	E₃	E₄	E₈	E_8.1	E_8.2	E₉	E_9.1	E_9.2
25	70	35	23	23.5	–	97.00	63.5	57	45	40	55	33.4	–	40.2	8.30	–	21.40
35	100	50	34	33.0	47.0	118.00	79.6	82	62	52	80	50.3	–	60.5	13.10	–	29.10
45	120	60	45	37.5	55.6	147.00	101.5	100	80	60	98	62.9	–	72.0	16.70	–	36.50
55	140	70	53	43.5	63.3	170.65	123.1	116	95	70	114	74.2	–	81.6	18.85	–	40.75
65	170	85	63	53.5	–	207.30	146.0	142	110	82	140	35.0	93	106.0	9.30	26	55.00

Size	H	H₁	H₂²⁾	H₂³⁾	H₃⁴⁾	K₁	K₂	N₁	N₂	N₅	N₆^±0.5	Ø S₁	S₂	S₅	S₉⁵⁾	T⁶⁾	V₁	V₁⁷⁾
25	36	30	23.60	23.40	–	14.05	–	9	7.3	5.5	14.3	6.7	M8	7	M3-6.5 deep	30.0	7.5	-
35	48	41	31.10	30.80	43	15.55	17.40	12	11.0	7.0	19.4	8.5	M10	9	M3-6.0 deep	40.0	8.0	-
45	60	51	39.10	38.80	53	17.45	20.35	15	13.5	8.0	22.4	10.4	M12	14	M4-9.0 deep	52.5	10.0	-
55	70	58	47.85	47.55	60	21.75	24.90	18	13.7	9.0	28.7	12.4	M14	16	M5-8.0 deep	60.0	12.0	12.6_+/-0,5⁷⁾
65	90	76	58.15	57.85	–	30.00	33.00	23	21.5	9.3	36.5	14.6	M16	18	M4-8.0 deep	75.0	15.0	15.6_+/-0,5⁷⁾

1) Dimension A₄ = Width of the additional longitudinal seal
2) Dimension H₂ with cover strip
3) Dimension H₂ without cover strip
4) Dimension H₃ = Total roller runner block including the additional longitudinal seal
5) Thread for connecting parts
6) T = Rail separation of the roller guide rail
7) Dimension for runner blocks size 55 and 65 without coating and AS seal

Technical data

Size	Mass (kg)	Load ratings¹⁾ (N)		Torsional moment load capacity¹⁾ (Nm)		Longitudinal moment load capacity¹⁾ (Nm)

	m	C	C₀	M_t	M_t0	M_L	M_L0
25	0.73	26900	59500	348	770	260	580
35	2.15	61000	119400	1210	2370	760	1480
45	4.05	106600	209400	2640	5180	1650	3240
55	5.44	140400	284700	4120	8350	2610	5290
65	10.72	237200	456300	8430	16210	5260	10120

1) Determination of the dynamic load capacities and load moments is based on a stroke travel of 100,000 m according to DIN ISO 14728-1.
However, often only 50,000 m is actually stipulated. For comparison: Multiply values C, M_t and M_L from the table by 1.23.

FLS – Flanged, long, standard height R1853 ... 2.

Features and Ordering

Material numbers

Size	Roller runner block with size	Preload class		Accuracy class				Seals
Size	Roller runner block with size	C2	C3	H	P	SP	UP	DS	LS	SS	AS¹⁾
25	R1853 2	2		3	2	1	9	2X	–	–	–
25	R1853 2		3		2	1	9	2X	–	–	–
35	R1853 3	2		3	2	1	9	2X	25	24	2A
35	R1853 3		3		2	1	9	2X	25	24	2A
45	R1853 4	2		3	2	1	9	2X	25	24	2A
45	R1853 4		3		2	1	9	2X	25	24	2A
55	R1853 5	2		3	2	1	9	2X	–	–	2A
55	R1853 5		3		2	1	9	2X	–	–	2A
65	R1853 6	2		3	2	1	9	2X	–	–	–
65	R1853 6		3		2	1	9	2X	–	–	–

1) With integrated DS seal

Preload classes
C2 = Average preload
C3 = High preload
C1, C4, C5 upon request

Seals
DS = Double-lip seal
LS = Low-friction seal
SS = Standard seal
AS = Longitudinal seal

Order example
Options:
▶ Roller runner block FLS
▶ Size 35
▶ Preload class C2
▶ Accuracy class H
▶ With double-lip seal 2X
Material number: R1853 323 2X

Dimensional Drawing and Specifications


		a) For O-ring Size 25: Ø 5 · 1.5 (mm) Sizes 35 to 65: Ø 7 · 1.5 (mm) Open lube port if necessary (see section entitled "Lubrication"). b) Recommended position for pin holes (E4 dimensions, see section entitled "Instruction for mounting", segment "Pinned fitting"). Pre-drilled holes may be present at this position for manufacturing reasons. They are suitable for drilling out. c) Lube nipple, thread M6 – 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors. d) For roller guide rails of accuracy class H, this base area may be without a groove for manufacturing reasons. e) Sealing plugs may be present at this position for manufacturing reasons. Remove before mounting. f) Runner blocks size 55 and 65 without coating and AS seal.

Dimensions (mm)

Size	A	A₁	A₂	A₃	A₄¹⁾	B	B₁	E₁	E₂	E₃	E₄	E₈	E_8.1	E_8.2	E₉	E_9.1	E_9.2
25	70	35	23	23.5	–	115.00	81.5	57	45	40	55	33.4	–	40.2	8.30	–	21.40
35	100	50	34	33.0	47.0	142.00	103.6	82	62	52	80	50.3	–	60.5	13.10	–	29.10
45	120	60	45	37.5	55.6	179.50	134.0	100	80	60	98	62.9	–	72.0	16.70	–	36.50
55	140	70	53	43.5	63.3	209.65	162.1	116	95	70	114	74.2	–	81.6	18.85	–	40.75
65	170	85	63	53.5	–	255.30	194.0	142	110	82	140	35.0	93	106.0	9.30	26	55.00

Size	H	H₁	H₂²⁾	H₂³⁾	H₃⁴⁾	K₁	K₂	N₁	N₂	N₅	N₆^±0.5	Ø S₁	S₂	S₅	S₉⁵⁾	T⁶⁾	V₁	V₁⁷⁾
25	36	30	23.60	23.40	–	23.05	–	9	7.3	5.5	14.3	6.7	M8	7	M3-6.5 deep	30.0	7.5	-
35	48	41	31.10	30.80	43	27.55	29.40	12	11.0	7.0	19.4	8.5	M10	9	M3-6.0 deep	40.0	8.0	-
45	60	51	39.10	38.80	53	33.70	36.60	15	13.5	8.0	22.4	10.4	M12	14	M4-9.0 deep	52.5	10.0	-
55	70	58	47.85	47.55	60	41.25	44.40	18	13.7	9.0	28.7	12.4	M14	16	M5-8.0 deep	60.0	12.0	12.6_+/-0,5⁷⁾
65	90	76	58.15	57.85	–	54.00	57.00	23	21.5	9.3	36.5	14.6	M16	18	M4-8.0 deep	75.0	15.0	15.6_+/-0,5⁷⁾

Technical data

Size	Mass (kg)	Load ratings¹⁾ (N)		Torsional moment load capacity¹⁾ (Nm)		Longitudinal moment load capacity¹⁾ (Nm)

	m	C	C₀	M_t	M_t0	M_L	M_L0
25	0.93	33300	76400	432	990	420	970
35	2.70	74900	155400	1490	3080	1220	2530
45	5.15	132300	276400	3270	6830	2690	5630
55	7.15	174000	374900	5100	10990	4420	9520
65	14.18	295900	606300	10510	21540	8870	18180

SNH – Slimline, normal, high R1821 ... 2.

Features and Ordering

Material numbers

Size	Roller runner block with size	Preload class		Accuracy class				Seals
Size	Roller runner block with size	C2	C3	H	P	SP	UP	DS	LS	SS	AS¹⁾
25	R1821 2	2		3	2	1	9	2X	–	–	–
25	R1821 2		3		2	1	9	2X	–	–	–
35	R1821 3	2		3	2	1	9	2X	25	24	2A
35	R1821 3		3		2	1	9	2X	25	24	2A
45	R1821 4	2		3	2	1	9	2X	25	24	2A
45	R1821 4		3		2	1	9	2X	25	24	2A
55	R1821 5	2		3	2	1	9	2X	–	–	2A
55	R1821 5		3		2	1	9	2X	–	–	2A

1) With integrated DS seal

Preload classes
C2 = Average preload
C3 = High preload
C1, C4, C5 upon request

Seals
DS = Double-lip seal
LS = Low-friction seal
SS = Standard seal
AS = Longitudinal seal

Order example
Options:
▶ Roller runner block SNH
▶ Size 35
▶ Preload class C2
▶ Accuracy class H
▶ With double-lip seal 2X
Material number: R1821 323 2X

Dimensional Drawing and Specifications


		a) For O-ring Size 25: Ø 5 · 1.5 (mm) Sizes 35 to 55: Ø 7 · 1.5 (mm) Open lube port if necessary (see section entitled "Lubrication"). b) Recommended position for pin holes (E4 dimensions, see section entitled "Instruction for mounting", segment "Pinned fitting"). c) Lube nipple, thread M6 – 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors. d) For roller guide rails of accuracy class H, this base area may be without a groove for manufacturing reasons.

Dimensions (mm)

Size	A	A₁	A₂	A₃	A₄¹⁾	B	B₁	E₁	E₂	E₈	E_8.2	E₉	E_9.2
25	48	24	23	12.5	–	97.00	63.5	35	35	33.4	40.2	12.30	25.40
35	70	35	34	18.0	47.0	118.00	79.6	50	50	50.3	60.5	20.10	36.10
45	86	43	45	20.5	55.6	147.00	101.5	60	60	62.9	72.0	26.70	46.50
55	100	50	53	23.5	63.3	170.65	123.1	75	75	74.2	81.6	28.85	50.75

Size	H	H₁	H₂²⁾	H₂³⁾	H₃⁴⁾	K₁	K₂	N₃	N₅	N₆^±0.5	S₂	S₅	S₉⁵⁾	T⁶⁾	V₁
25	40	34	23.60	23.40	–	19.05	–	8	–	14.3	M6	7	M3-6.5 deep	30.0	7.5
35	55	48	31.10	30.80	50	21.55	23.40	13	14.0	19.4	M8	9	M3-6.0 deep	40.0	8.0
45	70	61	39.10	38.80	63	27.45	30.35	18	18.0	22.4	M10	14	M4-9.0 deep	52.5	10.0
55	80	68	47.85	47.55	70	31.75	34.90	19	19.0	28.7	M12	16	M5-8.0 deep	60.0	12.0

Technical data

Size	Mass (kg)	Load ratings¹⁾ (N)		Torsional moment load capacity¹⁾ (Nm)		Longitudinal moment load capacity¹⁾ (Nm)

	m	C	C₀	M_t	M_t0	M_L	M_L0
25	0.63	26900	59500	348	770	260	580
35	1.85	61000	119400	1210	2370	760	1480
45	3.35	106600	209400	2640	5180	1650	3240
55	5.04	140400	284700	4120	8350	2610	5290

SLH – Slimline, long, high R1824 ... 2.

Features and Ordering

Material numbers

Size	Roller runner block with size	Preload class		Accuracy class				Seals
Size	Roller runner block with size	C2	C3	H	P	SP	UP	DS	LS	SS	AS¹⁾
25	R1824 2	2		3	2	1	9	2X	–	–	–
25	R1824 2		3		2	1	9	2X	–	–	–
35	R1824 3	2		3	2	1	9	2X	25	24	2A
35	R1824 3		3		2	1	9	2X	25	24	2A
45	R1824 4	2		3	2	1	9	2X	25	24	2A
45	R1824 4		3		2	1	9	2X	25	24	2A
55	R1824 5	2		3	2	1	9	2X	–	–	2A
55	R1824 5		3		2	1	9	2X	–	–	2A

1) With integrated DS seal

Preload classes
C2 = Average preload
C3 = High preload
C1, C4, C5 upon request

Seals
DS = Double-lip seal
LS = Low-friction seal
SS = Standard seal
AS = Longitudinal seal

Order example
Options:
▶ Roller runner block SLH
▶ Size 35
▶ Preload class C2
▶ Accuracy class H
▶ With double-lip seal 2X
Material number: R1824 323 2X

Dimensional Drawing and Specifications


		a) For O-ring Size 25: Ø 5 · 1.5 (mm) Sizes 35 to 55: Ø 7 · 1.5 (mm) Open lube port if necessary (see section entitled "Lubrication"). b) Recommended position for pin holes (E4 dimensions, see section entitled "Instruction for mounting", segment "Pinned fitting"). c) Lube nipple, thread M6 – 8 deep: Connection is possible on all sides (at front and top for size 25). Dimensions differ among different connectors. d) For roller guide rails of accuracy class H, this base area may be without a groove for manufacturing reasons.

Dimensions (mm)

Size	A	A₁	A₂	A₃	A₄¹⁾	B	B₁	E₁	E₂	E₈	E_8.2	E₉	E_9.2
25	48	24	23	12.5	–	115.00	81.5	35	50	33.4	40.2	12.30	25.40
35	70	35	34	18.0	47.0	142.00	103.6	50	72	50.3	60.5	20.10	36.10
45	86	43	45	20.5	55.6	179.50	134.0	60	80	62.9	72.0	26.70	46.50
55	100	50	53	23.5	63.3	209.65	162.1	75	95	74.2	81.6	28.85	50.75

Size	H	H₁	H₂²⁾	H₂³⁾	H₃⁴⁾	K₁	K₂	N₃	N₅	N₆^±0.5	S₂	S₅	S₉⁵⁾	T⁶⁾	V₁
25	40	34	23.60	23.40	–	20.55	–	8	9.5	14.3	M6	7	M3-6.5 deep	30.0	7.5
35	55	48	31.10	30.80	50	22.55	24.40	13	14.0	19.4	M8	9	M3-6.0 deep	40.0	8.0
45	70	61	39.10	38.80	63	33.70	36.60	18	18.0	22.4	M10	14	M4-9.0 deep	52.5	10.0
55	80	68	47.85	47.55	70	41.25	44.40	19	19.0	28.7	M12	16	M5-8.0 deep	60.0	12.0

Technical data

Size	Mass (kg)	Load ratings¹⁾ (N)		Torsional moment load capacity¹⁾ (Nm)		Longitudinal moment load capacity¹⁾ (Nm)

	m	C	C₀	M_t	M_t0	M_L	M_L0
25	0.80	33300	76400	432	990	420	970
35	2.35	74900	155400	1490	3080	1220	2530
45	4.45	132300	276400	3270	6830	2690	5630
55	6.55	174000	374900	5100	10990	4420	9520

Data to be displayed: 30; 45; 60

Part Number
R18516222X

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Block Type	Rail Width (mm)	Mounting Height H (mm)	Nominal Part Number	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (Nm)	Allowable Static Moment MB (Nm)	Allowable Static Moment MC (Nm)	Overall Width (mm)	Block Length (mm)
	892.67 €	1	Available	70 Days	[Wide] FNS - Flange, normal, standard height	63	90	65	237200	456300	10120	10120	16210	170	207.3

Download (PDF)

BOSCH REXROTHLink to the website.

Basic information

Set / Single Item	Block only	Rail Type	standard Rail	No. of Blocks	1
Material	Carbon steel	Preload	Medium Preload	Accuracy	Precision Grade (higher)
Rolling Element	Roller

This page is Roller runner block / Steel, part number R18516222X.
You can find the detail information about specifications and dimensions on part number R18516222X.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type
- R1821
- R1824
- R1851
- R1853
Clear
Block Type
- Standard
  - SNH - Slimline, normal, high height
- Wide
  - FNS - Flange, normal, standard height
- Wide Long
  - FLS - Flange, long, standard height
- Long
  - SLH - Slimline, long, high height
Clear
Rail Width(mm)
23

34

45

53

63
Clear
Mounting Height H(mm)
36

48

55

60

70

80

90
Clear
Nominal Part Number
25

35

45

55

65
Clear
Overall Width(mm)
- 70
- 86
- 100
- 120
- 140
- 170
Clear
Block Length(mm)
97

115

118

142

147

170.65

179.5

207.3

209.65

255.3
Clear
Filter by CAD data type
- 3D
Clear

Filter by standard shipping days

All

70 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
R18244222X
R18245222X
R18512222X
R18532222X
R18533222X
R18534222X

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Block Type	Rail Width (mm)	Mounting Height H (mm)	Nominal Part Number	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (Nm)	Allowable Static Moment MB (Nm)	Allowable Static Moment MC (Nm)	Overall Width (mm)	Block Length (mm)
399.42 €	1	Available	70 Days	[Long] SLH - Slimline, long, high height	45	70	45	106600	209400	3240	3240	5180	86	179.5
543.79 €	1	Available	70 Days	[Long] SLH - Slimline, long, high height	53	80	55	140400	284700	5290	5290	8350	100	209.65
287.12 €	1	Available	70 Days	[Wide] FNS - Flange, normal, standard height	23	36	25	26900	59500	580	580	770	70	97
330.18 €	1	Available	70 Days	[Wide Long] FLS - Flange, long, standard height	23	36	25	33300	76400	970	970	990	70	115
333.51 €	1	Available	70 Days	[Wide Long] FLS - Flange, long, standard height	34	48	35	74900	155400	2530	2530	3080	100	142
420.25 €	1	Available	70 Days	[Wide Long] FLS - Flange, long, standard height	45	60	45	132300	276400	5630	5630	6830	120	179.5