SKF Four-Lip Seal for Pedestal Bearing Housing (Part Numbers)
[Specifications]
・Engineering material: thermoplastic elastomer
・eClass code: 23-05-17-90
SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of three barrier solution
・Engineering material: thermoplastic elastomer
・eClass code: 23-05-17-90
SKF housing seals are the first barrier against contamination. The four-lip seals replace the former double-lip seals. The four-lip seals are more effective than the double-lip and generate less friction, which enables higher shaft speeds. For highly contaminated environments, SKF recommends the three-barrier solution. This cost-effective sealing solution can have a significant impact on bearing service life as contaminants have to pass through three barriers to reach the bearing.
[Features]
・Good protection from contamination
・Keep the lubricant in the housing
・Part of three barrier solution
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Basic information
| Temperature range | -40 to 100 °C | Version(g) | Four-lip seal | Use with splash water | suitable |
|---|---|---|---|---|---|
| Use with low friction | very suitable | Use with vertical shaft | suitable | Customs tariff weight unit | kg |
| Use in direct sunlight | suitable | Shaft tolerance class | h9 | Roughness of the shaft Ra(µm) | <=3.2 |
| Use with axial displacement | very suitable | Use with coarse particles | very suitable | max. inclination(°) | 1 to 0.5 |
| Use with chips, splinters, sharp objects | suitable | max. circumferential speed m/s | 13 | Model series | TSN..L |
| Contents | 2 pieces | Customs tariff weight Pro | 1 | Use during maintenance | very suitable |
| Use with dust | very suitable | Engineering material | thermoplastic elastomer | Customs tariff article number | 39269097 |
| Use with fine particles | very suitable | Customs tariff country of origin | DE |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.