Appearance of air cylinder CS2 series
JIS symbol for air cylinder CS2 series double acting type air cushion
Tube Inner Diameter (mm) | 125 | 140 | 160 | |
---|---|---|---|---|
Action | Double acting, single rod | |||
Fluid | Air | |||
Proof Pressure | 1.57 MPa | |||
Maximum operating pressure | 0.97 MPa | |||
Minimum operating pressure | 0.05 MPa | |||
Piston Speed | 50 to 500 mm/s | |||
Cushioning | Air cushion | |||
Ambient and fluid temperature | Without auto switch | 0 to 70°C (no freezing) | ||
With auto switch | 0 to 60°C (without freezing) | |||
Lubrication | Not required (non-lubricated) | |||
Stroke Length Tolerance (mm) | Stroke | Tolerance | ||
250 or Less | +1.0 0 | |||
251 to 1,000 | +1.4 0 | |||
1,001 to 1,500 | +1.8 0 | |||
1,501 to 1,600 | +2.2 0 | |||
Mounting type | Basic type, foot type, rod-end flange type, head-end flange type Single clevis type, double clevis type, center trunnion type |
(Units: mm)
Tube inner diameter | Mounting bracket | |
---|---|---|
Maximum Stroke | ||
Basic Type / Head Flange Type Single Clevis Type / Double Clevis Type Center trunnion type | Foot type Rod-end flange type | |
125 | 1,000 or less | 1,600 or less |
140 | ||
160 | 1,200 or less |
Structural Drawing
Number | Name | Material | Notes |
---|---|---|---|
1 | Rod cover | Aluminum diecast | Chromate |
2 | Head cover | Aluminum diecast | Chromate |
3 | Cylinder Tube | Aluminum alloy | Hard anodized aluminum |
4 | Piston | Aluminum alloy | Chromate |
5 | Piston rod | Carbon steel | Hard chrome plating |
6 | Bushing | Resin/Copper alloy (Multiple layers) | — |
7 | Tie-rod | Carbon steel | Zinc chromate |
8 | Tie-rod nut | Rolled steel | Nickel plated |
9 | Cushion Ring | Stainless steel | — |
10 | Cushion valve | Rolled steel | Nickel plated |
11 | Piston Nut | Carbon steel | Nickel plated |
12 | Plain washer | Carbon steel | Nickel plated |
13 | Wear Ring | Resin | — |
14 | magnet * | — | — |
15 | Retaining Ring | Spring steel | Phosphate coating |
16 | Rod packing | NBR | — |
17 | Cushion Seal | Urethane | — |
18 | Piston packing | NBR | — |
19 | Valve packing | NBR | — |
20 | Tube gasket | NBR | — |
21 | Piston gasket | NBR | — |
Tube Inner Diameter (mm) | Order Number | Details |
---|---|---|
125 | CS2-125A-PS | A set of part numbers (16), (17), (18), (20) |
140 | CS2-140A-PS | |
160 | CS2-160A-PS |
[Features]
· Lighter weight makes it possible to reduce device weight
· Die cast rod cover and head cover used for greater weight reduction
· Rod diameter has been changed to suit the application, allowing for greater weight reduction
· Allowable lateral load equal to the CS1 series
· Function remains equal to the CS1 series even if rod diameter is changed to suit the application
· Improved operability after installation
Operability has been improved by placing the piping port and cushion valve operating position on the same side
· Interchangeable with CS1 series
Cylinder mounting dimensions and rod-end thread sizes are interchangeable with the CS1 series
· Maintenance improved by making cushion seals replaceable
· Compact auto switches can be mounted