Indexing levers, Steel

Volume Discount

With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).
Limiting the indexing angle can be achieved with two dowels (sketch).
The bushing is connected to the shaft via keyway.
The location flange is bolted to the machine with two socket head cap screws (M 5).

The lever, via the location pin, provides the connection between shaft and location flange.
The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Products homepage

Data to be displayed: 30; 45; 60

Part Number
215-54-K10-A
215-54-K10-B
215-54-K12-A
215-54-K12-B
215-60-K14-A
215-60-K14-B
215-60-K16-A
215-60-K16-B

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Outside diameter d1	Bore d2	Type
107.26 €	1	Available	7 Days	54	K 10	A, without serrations
117.90 €	1	Available	7 Days	54	K 10	B, with 30 serrations
107.26 €	1	Available	7 Days	54	K 12	A, without serrations
117.90 €	1	Available	7 Days	54	K 12	B, with 30 serrations
114.88 €	1	Available	7 Days	60	K 14	A, without serrations
126.50 €	1	Available	7 Days	60	K 14	B, with 30 serrations
114.88 €	1	Available	7 Days	60	K 16	A, without serrations
126.50 €	1	Available	7 Days	60	K 16	B, with 30 serrations