![]() | Cylindric locating pins for locating workpieces in toleranced holes and also to be used as stops and feet. Flattened locating pin used to overcome differences in tolerances, between holes or to position an element in one direction only. The bearing surface of the seating pin has no centre (picture 1). |
Dimensions | Location hole | Weight | Art. No. | |||||
d1 | l1 | b | d2 | l2 | l4 | D1 | ||
g6 | n6 | H7 | ||||||
[mm] | [mm] | [g] | ||||||
seating pin, DIN 6321 form A, tolerance l1 = h9 – picture 1 | ||||||||
6 | 5 | – | 4 | 6 | – | 4 | 1.8 | 22630.0011 |
10 | 6 | – | 6 | 9 | – | 6 | 5.7 | 22630.0012 |
16 | 8 | – | 8 | 12 | – | 8 | 17.0 | 22630.0013 |
25 | 10 | – | 12 | 18 | – | 12 | 53.0 | 22630.0014 |
locating pin, cylindric, DIN 6321, form B – picture 2 | ||||||||
6 | 7 | – | 4 | 6 | 4 | 4 | 1.7 | 22630.0020 |
6 | 12 | – | 4 | 6 | 4 | 4 | 3.0 | 22630.0021 |
8 | 10 | – | 6 | 9 | 6 | 6 | 4.9 | 22630.0022 |
8 | 16 | – | 6 | 9 | 6 | 6 | 8.0 | 22630.0023 |
10 | 10 | – | 6 | 9 | 6 | 6 | 6.9 | 22630.0024 |
10 | 18 | – | 6 | 9 | 6 | 6 | 12.0 | 22630.0025 |
12 | 10 | – | 6 | 9 | 6 | 6 | 10.0 | 22630.0026 |
12 | 18 | – | 6 | 9 | 6 | 6 | 17.0 | 22630.0027 |
16 | 13 | – | 8 | 12 | 8 | 8 | 22.0 | 22630.0028 |
16 | 22 | – | 8 | 12 | 8 | 8 | 36.0 | 22630.0029 |
20 | 15 | – | 12 | 18 | 9 | 12 | 58.0 | 22630.0030 |
20 | 25 | – | 12 | 18 | 9 | 12 | 73.0 | 22630.0031 |
25 | 15 | – | 12 | 18 | 9 | 12 | 66.0 | 22630.0032 |
25 | 25 | – | 12 | 18 | 9 | 12 | 106.0 | 22630.0033 |
locating pin, flattened, DIN 6321, form C – picture 3 | ||||||||
6 | 7 | 1.0 | 4 | 6 | 4 | 4 | 1.3 | 22630.0040 |
6 | 12 | 1.0 | 4 | 6 | 4 | 4 | 2.2 | 22630.0041 |
8 | 10 | 1.6 | 6 | 9 | 6 | 6 | 4.0 | 22630.0042 |
8 | 16 | 1.6 | 6 | 9 | 6 | 6 | 5.5 | 22630.0043 |
10 | 10 | 2.5 | 6 | 9 | 6 | 6 | 5.6 | 22630.0044 |
10 | 18 | 2.5 | 6 | 9 | 6 | 6 | 8.9 | 22630.0045 |
12 | 10 | 2.5 | 6 | 9 | 6 | 6 | 7.0 | 22630.0046 |
12 | 18 | 2.5 | 6 | 9 | 6 | 6 | 11.0 | 22630.0047 |
16 | 13 | 3.5 | 8 | 12 | 8 | 8 | 17.0 | 22630.0048 |
16 | 22 | 3.5 | 8 | 12 | 8 | 8 | 26.0 | 22630.0049 |
20 | 15 | 5.0 | 12 | 18 | 9 | 12 | 39.0 | 22630.0050 |
20 | 25 | 5.0 | 12 | 18 | 9 | 12 | 55.0 | 22630.0051 |
25 | 15 | 5.0 | 12 | 18 | 9 | 12 | 49.0 | 22630.0052 |
25 | 25 | 5.0 | 12 | 18 | 9 | 12 | 72.0 | 22630.0053 |
[Applications]
· Cylindrical pins (Fig. 1) have a height tolerance of h9 and are used together with tolerance holes for positioning.
· Additionally, the type in Fig. 1 and the type in Fig. 2 can also be used as stoppers and feet.
· Chamfered dies and pins (Fig. 3) absorb tolerances in spacing between holes and use it to determine the fixed direction of the workpiece.