All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature

High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Numbers

Data to be displayed: 30; 45; 60

Part Number
HSR15M1A[1,2,3,4,5,6,7,8,9]+[67-1240/1]LH
HSR15M1A[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]LH
HSR15M1B[1,2,3,4,5,6,7,8,9]+[67-1240/1]LH
HSR15M1B[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]LH
HSR15M1YR[1,2,3,4,5,6,7,8,9]+[67-1240/1]LH
HSR15M1YR[1,2,3,4,5,6,7,8,9]C1+[67-1240/1]LH
HSR20M1A[1,2,3,4,5,6,7,8,9]+[89-1500/1]LH
HSR20M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]LH
HSR20M1B[1,2,3,4,5,6,7,8,9]+[89-1500/1]LH
HSR20M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]LH
HSR20M1LA[1,2,3,4,5,6,7,8,9]+[105-1500/1]LH
HSR20M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]LH
HSR20M1LB[1,2,3,4,5,6,7,8,9]+[105-1500/1]LH
HSR20M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]LH
HSR20M1LR[1,2,3,4,5,6,7,8,9]+[105-1500/1]LH
HSR20M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[105-1500/1]LH
HSR20M1R[1,2,3,4,5,6,7,8,9]+[89-1500/1]LH
HSR20M1R[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]LH
HSR20M1YR[1,2,3,4,5,6,7,8,9]+[89-1500/1]LH
HSR20M1YR[1,2,3,4,5,6,7,8,9]C[0,1]+[89-1500/1]LH
HSR25M1A[1,2,3,4,5,6,7,8,9]+[97-1500/1]LH
HSR25M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]LH
HSR25M1B[1,2,3,4,5,6,7,8,9]+[97-1500/1]LH
HSR25M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]LH
HSR25M1LA[1,2,3,4,5,6,7,8,9]+[116-1500/1]LH
HSR25M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]LH
HSR25M1LB[1,2,3,4,5,6,7,8,9]+[116-1500/1]LH
HSR25M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]LH
HSR25M1LR[1,2,3,4,5,6,7,8,9]+[116-1500/1]LH
HSR25M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[116-1500/1]LH
HSR25M1R[1,2,3,4,5,6,7,8,9]+[97-1500/1]LH
HSR25M1R[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]LH
HSR25M1YR[1,2,3,4,5,6,7,8,9]+[97-1500/1]LH
HSR25M1YR[1,2,3,4,5,6,7,8,9]C[0,1]+[97-1500/1]LH
HSR30M1A[1,2,3,4,5,6,7,8,9]+[112-1500/1]LH
HSR30M1A[1,2,3,4,5,6,7,8,9]C[0,1]+[112-1500/1]LH
HSR30M1B[1,2,3,4,5,6,7,8,9]+[112-1500/1]LH
HSR30M1B[1,2,3,4,5,6,7,8,9]C[0,1]+[112-1500/1]LH
HSR30M1LA[1,2,3,4,5,6,7,8,9]+[135-1500/1]LH
HSR30M1LA[1,2,3,4,5,6,7,8,9]C[0,1]+[135-1500/1]LH
HSR30M1LB[1,2,3,4,5,6,7,8,9]+[135-1500/1]LH
HSR30M1LB[1,2,3,4,5,6,7,8,9]C[0,1]+[135-1500/1]LH
HSR30M1LR[1,2,3,4,5,6,7,8,9]+[135-1500/1]LH
HSR30M1LR[1,2,3,4,5,6,7,8,9]C[0,1]+[135-1500/1]LH
HSR30M1R[1,2,3,4,5,6,7,8,9]+[112-1500/1]LH
HSR30M1R[1,2,3,4,5,6,7,8,9]C[0,1]+[112-1500/1]LH
HSR30M1YR[1,2,3,4,5,6,7,8,9]+[112-1500/1]LH
HSR30M1YR[1,2,3,4,5,6,7,8,9]C[0,1]+[112-1500/1]LH

Minimum order quantity	Standard Shipping Days ?	Block Type	Rail Width W1 (mm)	Mounting Height M (mm)	The number of LM blocks combined with a axis	Rail Length L (mm)	Radial Clearance	Accuracy Grade	Nominal Part Number	Basic Load Rating Dynamic Rating C (N)	Basic Load Rating Static Rating Co (N)	Allowable Static Moment MA (Nm)	Allowable Static Moment MB (Nm)	Allowable Static Moment MC (Nm)	Block Mounting Hole Pitch (Width Direction) (mm)	Block Mounting Hole Pitch (Length Direction) (mm)	Block Mounting Hole Diameter	Rail Mounting Hole Pitch (mm)	Rail Mounting Hole Diameter	Block external dimension W (mm)	Block external dimension L (mm)	Mounting hole for blocks	Mounting Hole Dimension H (ø)	Mounting Hole Screw Depth (mm)	Block dimension L1 (mm)
1	54 Days	Wide	15	24	1 ～ 9	67 ～ 1240	Normal	High Grade	15	8330	13500	80.5	80.5	84.4	38	30	4.5	60	4.5	47	59.6	Tapped Hole	-	Through	38.8
1	54 Days	Wide	15	24	1 ～ 9	67 ～ 1240	Light Preload	High Grade	15	8330	13500	80.5	80.5	84.4	38	30	4.5	60	4.5	47	59.6	Tapped Hole	-	Through	38.8
1	54 Days	Wide	15	24	1 ～ 9	67 ～ 1240	Normal	High Grade	15	8330	13500	80.5	80.5	84.4	38	30	4.5	60	4.5	47	59.6	Drilled Hole	4.5	Through	38.8
1	54 Days	Wide	15	24	1 ～ 9	67 ～ 1240	Light Preload	High Grade	15	8330	13500	80.5	80.5	84.4	38	30	4.5	60	4.5	47	59.6	Drilled Hole	4.5	Through	38.8
1	54 Days	Standard	15	28	1 ～ 9	67 ～ 1240	Normal	High Grade	15	8330	13500	80.5	80.5	84.4	11.5	18	4	60	4.5	33.5	59.6	Tapped Hole	-	5	38.8
1	54 Days	Standard	15	28	1 ～ 9	67 ～ 1240	Light Preload	High Grade	15	8330	13500	80.5	80.5	84.4	11.5	18	4	60	4.5	33.5	59.6	Tapped Hole	-	5	38.8
1	54 Days	Wide	20	30	1 ～ 9	89 ～ 1500	Normal	High Grade	20	13800	23800	190	190	201	53	40	6	60	4.5	63	76	Tapped Hole	-	Through	50.8
1	54 Days	Wide	20	30	1 ～ 9	89 ～ 1500	Light Preload / Medium Preload	High Grade	20	13800	23800	190	190	201	53	40	6	60	4.5	63	76	Tapped Hole	-	Through	50.8
1	54 Days	Wide	20	30	1 ～ 9	89 ～ 1500	Normal	High Grade	20	13800	23800	190	190	201	53	40	6	60	4.5	63	76	Drilled Hole	6	Through	50.8
1	54 Days	Wide	20	30	1 ～ 9	89 ～ 1500	Light Preload / Medium Preload	High Grade	20	13800	23800	190	190	201	53	40	6	60	4.5	63	76	Drilled Hole	6	Through	50.8
1	54 Days	Wide	20	30	1 ～ 9	105 ～ 1500	Normal	High Grade	20	21300	31800	323	323	270	53	40	6	60	4.5	63	92	Tapped Hole	-	Through	66.8
1	54 Days	Wide	20	30	1 ～ 9	105 ～ 1500	Light Preload / Medium Preload	High Grade	20	21300	31800	323	323	270	53	40	6	60	4.5	63	92	Tapped Hole	-	Through	66.8
1	54 Days	Wide	20	30	1 ～ 9	105 ～ 1500	Normal	High Grade	20	21300	31800	323	323	270	53	40	6	60	4.5	63	92	Drilled Hole	6	Through	66.8
1	54 Days	Wide	20	30	1 ～ 9	105 ～ 1500	Light Preload / Medium Preload	High Grade	20	21300	31800	323	323	270	53	40	6	60	4.5	63	92	Drilled Hole	6	Through	66.8
1	54 Days	Standard	20	30	1 ～ 9	105 ～ 1500	Normal	High Grade	20	21300	31800	323	323	270	32	50	5	60	4.5	44	92	Tapped Hole	-	6	66.8
1	54 Days	Standard	20	30	1 ～ 9	105 ～ 1500	Light Preload / Medium Preload	High Grade	20	21300	31800	323	323	270	32	50	5	60	4.5	44	92	Tapped Hole	-	6	66.8
1	54 Days	Standard	20	30	1 ～ 9	89 ～ 1500	Normal	High Grade	20	13800	23800	190	190	201	32	36	5	60	4.5	44	76	Tapped Hole	-	6	50.8
1	54 Days	Standard	20	30	1 ～ 9	89 ～ 1500	Light Preload / Medium Preload	High Grade	20	13800	23800	190	190	201	32	36	5	60	4.5	44	76	Tapped Hole	-	6	50.8
1	54 Days	Standard	20	30	1 ～ 9	89 ～ 1500	Normal	High Grade	20	13800	23800	190	190	201	11.5	25	5	60	4.5	43.5	76	Tapped Hole	-	6	50.8
1	54 Days	Standard	20	30	1 ～ 9	89 ～ 1500	Light Preload / Medium Preload	High Grade	20	13800	23800	190	190	201	11.5	25	5	60	4.5	43.5	76	Tapped Hole	-	6	50.8
1	54 Days	Wide	23	36	1 ～ 9	97 ～ 1500	Normal	High Grade	25	19900	34400	307	307	344	57	45	8	60	7	70	83.9	Tapped Hole	-	Through	59.5
1	54 Days	Wide	23	36	1 ～ 9	97 ～ 1500	Light Preload / Medium Preload	High Grade	25	19900	34400	307	307	344	57	45	8	60	7	70	83.9	Tapped Hole	-	Through	59.5
1	54 Days	Wide	23	36	1 ～ 9	97 ～ 1500	Normal	High Grade	25	19900	34400	307	307	344	57	45	7	60	7	70	83.9	Drilled Hole	7	Through	59.5
1	54 Days	Wide	23	36	1 ～ 9	97 ～ 1500	Light Preload / Medium Preload	High Grade	25	19900	34400	307	307	344	57	45	7	60	7	70	83.9	Drilled Hole	7	Through	59.5
1	54 Days	Wide	23	36	1 ～ 9	116 ～ 1500	Normal	High Grade	25	27200	45900	529	529	459	57	45	8	60	7	70	103	Tapped Hole	-	Through	78.6
1	54 Days	Wide	23	36	1 ～ 9	116 ～ 1500	Light Preload / Medium Preload	High Grade	25	27200	45900	529	529	459	57	45	8	60	7	70	103	Tapped Hole	-	Through	78.6
1	54 Days	Wide	23	36	1 ～ 9	116 ～ 1500	Normal	High Grade	25	27200	45900	529	529	459	57	45	7	60	7	70	103	Drilled Hole	7	Through	78.6
1	54 Days	Wide	23	36	1 ～ 9	116 ～ 1500	Light Preload / Medium Preload	High Grade	25	27200	45900	529	529	459	57	45	7	60	7	70	103	Drilled Hole	7	Through	78.6
1	54 Days	Standard	23	40	1 ～ 9	116 ～ 1500	Normal	High Grade	25	27200	45900	529	529	459	35	50	8	60	7	48	103	Tapped Hole	-	8	78.6
1	54 Days	Standard	23	40	1 ～ 9	116 ～ 1500	Light Preload / Medium Preload	High Grade	25	27200	45900	529	529	459	35	50	8	60	7	48	103	Tapped Hole	-	8	78.6
1	54 Days	Standard	23	40	1 ～ 9	97 ～ 1500	Normal	High Grade	25	19900	34400	307	307	344	35	35	8	60	7	48	83.9	Tapped Hole	-	8	59.5
1	54 Days	Standard	23	40	1 ～ 9	97 ～ 1500	Light Preload / Medium Preload	High Grade	25	19900	34400	307	307	344	35	35	8	60	7	48	83.9	Tapped Hole	-	8	59.5
1	54 Days	Standard	23	40	1 ～ 9	97 ～ 1500	Normal	High Grade	25	19900	34400	307	307	344	16	30	6	60	7	47.5	83.9	Tapped Hole	-	6	59.5
1	54 Days	Standard	23	40	1 ～ 9	97 ～ 1500	Light Preload / Medium Preload	High Grade	25	19900	34400	307	307	344	16	30	6	60	7	47.5	83.9	Tapped Hole	-	6	59.5
1	54 Days	Wide	28	42	1 ～ 9	112 ～ 1500	Normal	High Grade	30	28000	46800	524	524	562	72	52	10	80	9	90	98.8	Tapped Hole	-	Through	70.4
1	54 Days	Wide	28	42	1 ～ 9	112 ～ 1500	Light Preload / Medium Preload	High Grade	30	28000	46800	524	524	562	72	52	10	80	9	90	98.8	Tapped Hole	-	Through	70.4
1	54 Days	Wide	28	42	1 ～ 9	112 ～ 1500	Normal	High Grade	30	28000	46800	524	524	562	72	52	9	80	9	90	98.8	Drilled Hole	9	Through	70.4
1	54 Days	Wide	28	42	1 ～ 9	112 ～ 1500	Light Preload / Medium Preload	High Grade	30	28000	46800	524	524	562	72	52	9	80	9	90	98.8	Drilled Hole	9	Through	70.4
1	54 Days	Wide	28	42	1 ～ 9	135 ～ 1500	Normal	High Grade	30	37300	62500	889	889	751	72	52	10	80	9	90	121.4	Tapped Hole	-	Through	93
1	54 Days	Wide	28	42	1 ～ 9	135 ～ 1500	Light Preload / Medium Preload	High Grade	30	37300	62500	889	889	751	72	52	10	80	9	90	121.4	Tapped Hole	-	Through	93
1	54 Days	Wide	28	42	1 ～ 9	135 ～ 1500	Normal	High Grade	30	37300	62500	889	889	751	72	52	9	80	9	90	121.4	Drilled Hole	9	Through	93
1	54 Days	Wide	28	42	1 ～ 9	135 ～ 1500	Light Preload / Medium Preload	High Grade	30	37300	62500	889	889	751	72	52	9	80	9	90	121.4	Drilled Hole	9	Through	93
1	54 Days	Standard	28	45	1 ～ 9	135 ～ 1500	Normal	High Grade	30	37300	62500	889	889	751	40	60	8	80	9	60	121.4	Tapped Hole	-	10	93
1	54 Days	Standard	28	45	1 ～ 9	135 ～ 1500	Light Preload / Medium Preload	High Grade	30	37300	62500	889	889	751	40	60	8	80	9	60	121.4	Tapped Hole	-	10	93
1	54 Days	Standard	28	45	1 ～ 9	112 ～ 1500	Normal	High Grade	30	28000	46800	524	524	562	40	40	8	80	9	60	98.8	Tapped Hole	-	10	70.4
1	54 Days	Standard	28	45	1 ～ 9	112 ～ 1500	Light Preload / Medium Preload	High Grade	30	28000	46800	524	524	562	40	40	8	80	9	60	98.8	Tapped Hole	-	10	70.4
1	54 Days	Standard	28	45	1 ～ 9	112 ～ 1500	Normal	High Grade	30	37300	62500	524	524	562	16	40	6	80	9	59.5	98.8	Tapped Hole	-	9	70.4
1	54 Days	Standard	28	45	1 ～ 9	112 ～ 1500	Light Preload / Medium Preload	High Grade	30	37300	62500	524	524	562	16	40	6	80	9	59.5	98.8	Tapped Hole	-	9	70.4

Basic information

Set / Single Item	Set	Rail Type	Standard	Material	Stainless Steel
Ball Arrangement	4-Row, Circular	Retainer	N/A	Lubrication System	Lubrication Applied
Rolling Element	Ball	Number of block mounting holes(holes)	4

Configure

48Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Block Type
- Standard
- Wide
Clear
Rail Width W1(mm)
15

20

23

28
Clear
Mounting Height M(mm)
24

28

30

36

40

42

45
Clear
The number of LM blocks combined with a axis
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
Clear
Rail Length L(mm)
[67-1500/1mm Unit(s)]
Clear
Radial Clearance
- Normal
- Light Preload
- Medium Preload
Clear
Nominal Part Number
15

20

25

30
Clear
Block Mounting Hole Pitch (Width Direction)(mm)
11.5

16

32

35

38

40

53

57

72
Clear
Block Mounting Hole Pitch (Length Direction)(mm)
18

25

30

35

36

40

45

50

52

60
Clear
Block Mounting Hole Diameter
4

4.5

5

6

7

8

9

10
Clear
Rail Mounting Hole Pitch(mm)
60

80
Clear
Rail Mounting Hole Diameter
4.5

7

9
Clear
Block external dimension W(mm)
33.5

43.5

44

47

47.5

48

59.5

60

63

70

90
Clear
Block external dimension L(mm)
59.6

76

83.9

92

98.8

103

121.4
Clear
Mounting hole for blocks
- Drilled Hole
- Tapped Hole
Clear
Mounting Hole Dimension H(ø)
4.5

6

7

9
Clear
Mounting Hole Screw Depth(mm)
5

6

8

9

10

Through
Clear
Block dimension L1(mm)
38.8

50.8

59.5

66.8

70.4

78.6

93
Clear
Type
- HSR-M1A
- HSR-M1B
- HSR-M1LA
- HSR-M1LB
- HSR-M1LR
- HSR-M1R
- HSR-M1YR
Clear
Accuracy Grade
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Extra High Precision Grade
Clear
Filter by CAD data type
- 2D
Clear