Pin Hole Holder
[Features]
· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
· Pin holes with an external diameter of ø16 mm can be used.
· Fix pin holes with an M20P = 0.5 threaded ring.
· The optical axis central height is standardized at 25 mm from the bottom.
· Capable of fixing pinholes and moving them in micro-movement increments in the YZ axis direction.
· Pin holes with an external diameter of ø16 mm can be used.
· Fix pin holes with an M20P = 0.5 threaded ring.
· The optical axis central height is standardized at 25 mm from the bottom.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
F513F
Basic information
| Type | V Groove and Cross Roller | Travel Distance | ±2mm |
|---|
This page is Pin Hole Holder, part number F513F.
You can find the detail information about specifications and dimensions on part number F513F.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.