High-Speed Steel Point Tap【10 szt.】
Rysunek konturowy
Szczegółowe informacje
Podstawowe informacje
[Features]
-High speed uncoated steel tap with spiral point
-Can be used for through hole machining
-Effective for continuous chip materials such as carbon steel and steel alloys.
Specyfikacja i cena
Specifications
Model Number
POT
1 Pack 10 Pieces Included
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | Quantity/ pack | |
| M2 | 0.4 | 5P | LM2 | 40 | 9.5 | 15 | 3 | 2 | 5 | 2.5 | 10 Pieces |
| M3 | 0.5 | LM2 | 46 | 11 | 18 | 4 | 3 | 6 | 3.2 | ||
| M4 | 0.7 | LM2 | 52 | 13 | 20 | 5 | 3 | 7 | 4 | ||
| M5 | 0.8 | LM2 | 60 | 16 | 25 | 5.5 | 3 | 7 | 4.5 | ||
| M6 | 1 | LM2 | 62 | 19 | 28 | 6 | 3 | 7 | 4.5 | ||
| M8 | 1.25 | LM3 | 70 | 22 | 35 | 6.2 | 3 | 8 | 5 | ||
| M10 | 1.5 | LM3 | 75 | 24 | 39 | 7 | 3 | 8 | 5.5 | ||
| M12 | 1.75 | LM4 | 82 | 29 | 42 | 8.5 | 3 | 9 | 6.5 | ||
[ ! ]M8 or below have protruding centers.
[ ! ]For details about cutting tap accuracy LM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
Funkcje i przykłady użycia
More Information
● Used for machining through-holes.
● It is suitable for work materials where cuttings are continuously discharged such as carbon steel, alloy steel, etc.
Numer części został potwierdzony