[Features]
-The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper
-The high helix shape provides excellent chip evacuation and sharpness
-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.
Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
3 | 19 | 51 | 3 |
3.2 | 21 | 53 | 4 |
3.3 | 21 | 53 | 4 |
3.5 | 24 | 56 | 4 |
3.66 | 27 | 59 | 4 |
3.68 | 27 | 59 | 4 |
3.8 | 27 | 59 | 4 |
4 | 27 | 59 | 4 |
4.2 | 27 | 71 | 6 |
4.5 | 31 | 75 | 6 |
4.62 | 38 | 82 | 6 |
4.64 | 38 | 82 | 6 |
5 | 38 | 82 | 6 |
5.3 | 38 | 82 | 6 |
5.5 | 38 | 82 | 6 |
5.52 | 41 | 85 | 6 |
5.54 | 41 | 85 | 6 |
6 | 41 | 85 | 6 |
6.3 | 41 | 85 | 8 |
6.5 | 41 | 85 | 8 |
6.8 | 43 | 87 | 8 |
7 | 43 | 87 | 8 |
7.3 | 45 | 89 | 8 |
7.36 | 45 | 89 | 8 |
7.38 | 45 | 89 | 8 |
7.5 | 45 | 89 | 8 |
7.52 | 48 | 92 | 8 |
7.54 | 48 | 92 | 8 |
7.8 | 48 | 92 | 8 |
8 | 48 | 92 | 8 |
8.3 | 53 | 103 | 10 |
8.5 | 53 | 103 | 10 |
8.8 | 55 | 105 | 10 |
9 | 55 | 105 | 10 |
9.24 | 58 | 108 | 10 |
9.26 | 58 | 108 | 10 |
9.3 | 58 | 108 | 10 |
9.5 | 58 | 108 | 10 |
9.52 | 60 | 110 | 10 |
9.54 | 60 | 110 | 10 |
10 | 60 | 110 | 10 |
10.3 | 66 | 123 | 12 |
10.5 | 66 | 123 | 12 |
10.8 | 68 | 125 | 12 |
11 | 68 | 125 | 12 |
11.22 | 71 | 128 | 12 |
11.24 | 71 | 128 | 12 |
11.36 | 71 | 128 | 12 |
11.38 | 71 | 128 | 12 |
11.5 | 71 | 128 | 12 |
12 | 73 | 130 | 12 |
12.5 | 76 | 135 | 14 |
13 | 78 | 137 | 14 |