[Features]
-Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
Model Number |
Shank Diameter |
Flute Length |
Under Neck Diameter |
Overall Length |
Actual Effective Length Depends on Work Inclination Angle |
Figure |
|||||
Tip |
Length Under Neck |
||||||||||
30' |
1° |
2° |
3° |
||||||||
TSC-BEM4LB |
1 |
4 |
4 |
1.6 |
1.95 |
50 |
4.16 |
4.33 |
4.72 |
5.19 |
1 |
6 |
6.24 |
6.49 |
7.08 |
7.78 |
|||||||
8 |
8.31 |
8.66 |
9.44 |
10.38 |
|||||||
10 |
10.39 |
10.82 |
11.80 |
12.97 |
|||||||
12 |
12.47 |
12.99 |
14.16 |
15.57 |
|||||||
16 |
16.63 |
17.31 |
18.87 |
Without Interference |
|||||||
18 |
70 |
18.71 |
19.48 |
21.23 |
Without Interference |
||||||
20 |
20.79 |
21.64 |
23.59 |
Without Interference |
|||||||
25 |
25.98 |
27.05 |
29.49 |
Without Interference |
|||||||
1.5 |
16 |
6 |
2.4 |
2.9 |
70 |
16.63 |
17.31 |
18.87 |
20.76 |
1 |
|
20 |
20.79 |
21.64 |
23.59 |
25.95 |
|||||||
25 |
25.98 |
27.05 |
29.49 |
Without Interference |
|||||||
30 |
31.18 |
32.46 |
35.39 |
Without Interference |
|||||||
2 |
16 |
6 |
3.2 |
3.85 |
50 |
16.63 |
17.31 |
18.87 |
Without Interference |
1 |
|
20 |
70 |
20.79 |
21.64 |
23.59 |
Without Interference |
||||||
30 |
31.18 |
32.46 |
Without Interference |
Without Interference |
|||||||
3 |
20 |
6 |
4.8 |
5.85 |
70 |
Without Interference |
Without Interference |
Without Interference |
Without Interference |
2 |
Model Number
LN-TSC-BEM4S (Manufactured Product)
Tip R |
Length Under Neck ℓ1 1 mm Increment Designation |
Shank Diameter d |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Figure |
1 | 8 ~ 24 | 6 | 3 | 1.95 | 50 | 3 |
1.5 | 9 ~ 26 | 6 | 4 | 2.9 | 50 | 3 |
2 | 11 ~ 28 | 6 | 6 | 3.8 | 50 | 3 |
[ ! ]Take care when placing orders as the model numbers of manufactured products differ from those of stocked products.
For Cutting Conditions, Refer to >>Click here.