TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model (TSC-PSXR10)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-PSXR10
Brand: MISUMI
Price: 99.31 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 25 mm
Number of Flutes: 6 sheet
Shank Diameter (d): 10 mm
Overall Length (L): 80 mm
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-PSXR10
Part Number
|
|---|
| TSC-PSXR10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
99.31 € | 1 | Available | 5 Days | 10 | 25 | 6 | 10 | 80 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.025 ~ -0.045 | 2 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-PSXR | 1 | 2.5 | 60 | 6 | 4 | 1 |
| 2 | 5 | 60 | 6 | 4 | 1 | |
| 3 | 10 | 60 | 6 | 4 | 1 | |
| 4 | 12 | 60 | 6 | 4 | 1 | |
| 5 | 15 | 60 | 6 | 4 | 1 | |
| 6 | 15 | 60 | 6 | 6 | 2 | |
| 8 | 20 | 75 | 8 | 6 | 2 | |
| 10 | 25 | 80 | 10 | 6 | 2 | |
| 12 | 30 | 100 | 12 | 6 | 2 | |
| 16 | 40 | 110 | 16 | 6 | 2 | |
| 20 | 45 | 130 | 20 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The positive finish of the rake angle, sharp edge processing of the bottom blade corners and 53° strong twist deliver strength when finishing pocket vertical wall surfaces of mold bases (holding blocks), and when machining raw materials, heat-treated steel and aluminum.
● The TS film coating with much greater oxidation resistance and hardness than conventional films exhibits excellent durability, even with raw carbon steel materials, in addition to heat-treated steel.
● The tool has a high rigidity, reducing the chances of tool breakage to a minimum when cutting side surfaces.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
This page is TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model, part number TSC-PSXR10.
You can find the detail information about specifications and dimensions on part number TSC-PSXR10.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Inclined Cutting
-
Type
- SN-TSC-PSXR
- SNR-TSC-PSXR
- TSC-PSXR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-PSXR1 |
| TSC-PSXR12 |
| TSC-PSXR16 |
| TSC-PSXR2 |
| TSC-PSXR20 |
| TSC-PSXR3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
62.03 € | 1 | Available | 5 Days | 1 | 2.5 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
77.78 € | 1 | Available | 5 Days | 12 | 30 | 6 | 12 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.032 ~ -0.059 | 2 | ● | |
267.18 € | 1 | Available | 5 Days | 16 | 40 | 6 | 16 | 110 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.032 ~ -0.059 | 2 | ● | |
62.03 € | 1 | Available | 5 Days | 2 | 5 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
359.02 € | 1 | Available | 5 Days | 20 | 45 | 6 | 20 | 130 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.040 ~ -0.070 | 2 | ● | |
66.56 € | 1 | Available | 5 Days | 3 | 10 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● |
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.