Rejestracja
Potwierdzono
  • Outer Diameter (D)(φ)
  • Flute Length (ℓ)(mm)
  • Shank Diameter (d)(mm)
  • Overall Length (L)(mm)
  • Length Under Neck (ℓ1)(mm)
  • Processing Applications
  • Geometry
  • Torsion Angle (θ)
  • Additional Classification
  • Szacowane dni wysyłki
    • Wszystko
    • W ciągu 5 dni robocze

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-PEM2LB0.4-3)

TSC series carbide long neck square end mill, 2-flute / long neck model TSC-PEM2LB0.4-3
  • TSC series carbide long neck square end mill, 2-flute / long neck model
  • TSC series carbide long neck square end mill, 2-flute / long neck model

Numer części:

TSC-PEM2LB0.4-3
Wyczyść
    Ilość:
    Loading...

    Rysunek konturowy

    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Lista numerów części

    Liczba pozycji
    Numer części
    TSC-PEM2LB0.4-3

    Outer Diameter (D)

    (φ)

    Flute Length (ℓ)

    (mm)

    Shank Diameter (d)

    (mm)

    Overall Length (L)

    (mm)

    Length Under Neck (ℓ1)

    (mm)

    Processing Applications

    Geometry

    Torsion Angle (θ)

    Additional Classification

    Figure

    ● Inventory Product □ Manufacturer Product

    Under Neck Diameter d1

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 30'

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 1°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 2°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 3°

    (mm)

    Length Under Neck (θ)

    Minimalna wielkość zamówienia
    0.4
    0.6
    4
    50
    3
    Flat Surface / Side Surface / Groove / Inclined Cutting
    Sharp Corner
    Standard Helix (30 to 40°)
    Stocked Product
    1
    0.37
    3.14
    3.3
    3.66
    4.12
    10°
    1 szt.
    Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
    Standardowa data wysyłki
    21.89 €
    ( 26.05 € )
    5 dni robocze

    Szczegółowe informacje

    Podstawowe informacje

    [Features]
    -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
    -Can select the optimum body length for machining deep parts of the workpiece
    -Optimal for machining in the low to medium rotation range due to the universal 30° helix angle
    -It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating characteristics.

    Specyfikacja i cena

    Specifications

    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D
    Length Under Neck
    1
    Shank Diameter
    d
    Shank Diameter
    d
    Standard Sharp Edge Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Under Neck Angle
    θ
    Actual Effective Length Depends on Work Inclination Angle Figure
    30'
    0.1 0.3 - 4 No Standards 0.2 0.085 50 10° 0.31 0.33 0.37 0.41 1
    0.5 No Standards 0.52 0.55 0.61 0.69
    1 No Standards 1.05 1.10 1.22 1.37
    0.2 0.5 - 4 No Standards 0.3 0.18 50 10° 0.52 0.55 0.61 0.69 1
    1 1.05 1.10 1.22 1.37
    1.5 1.57 1.65 1.83 2.06
    2 No Standards 2.09 2.20 2.44 2.75
    2.5 No Standards 2.62 2.75 3.05 3.43
    3 No Standards 3.14 3.30 3.66 4.12
    3.5 No Standards 3.66 3.85 4.27 4.81
    4 No Standards 4.19 4.40 4.88 5.49
    0.3 1 - 4 0.45 0.28 50 10° 1.05 1.10 1.22 1.37 1
    1.5 No Standards 1.57 1.65 1.83 2.06
    2 2.09 2.20 2.44 2.75
    2.5 No Standards 2.62 2.75 3.05 3.43
    3 3.14 3.30 3.66 4.12
    4 4.19 4.40 4.88 5.49
    5 5.24 5.49 6.10 6.87
    6 No Standards 6.28 6.59 7.32 8.24
    9 No Standards 9.42 9.89 10.98 12.36
    0.4 1 - 4 No Standards 0.6 0.37 50 10° 1.05 1.10 1.22 1.37 1
    2 2.09 2.20 2.44 2.75
    2 6 6 15° 2.06 2.13 2.28 2.45
    3 - 4 10° 3.14 3.30 3.66 4.12
    4 4.19 4.40 4.88 5.49
    5 5.24 5.49 6.10 6.87
    6 6.28 6.59 7.32 8.24
    7 No Standards 7.33 7.69 8.54 9.61
    8 No Standards 8.38 8.79 9.76 10.98
    9 No Standards 9.42 9.89 10.98 12.36
    10 No Standards 10.47 10.99 12.21 13.73
    12 No Standards 12.57 13.19 14.65 16.48

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D
    Length Under Neck
    1
    Shank Diameter
    d
    Shank Diameter
    d
    Standard Sharp Edge Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Under Neck Angle
    θ
    Actual Effective Length Depends on Work Inclination Angle Figure
    30'
    0.5 1 - 4 No Standards 0.7 0.46 50 10° 1.05 1.10 1.22 1.37 1
    2 2.09 2.20 2.44 2.75
    3 No Standards 3.14 3.30 3.66 4.12
    4 4.19 4.40 4.88 5.49
    4 6 6 15° 4.13 4.26 4.56 4.91
    5 - 4 No Standards 10° 5.24 5.49 6.10 6.87
    6 6.28 6.59 7.32 8.24
    7 No Standards 7.33 7.69 8.54 9.61
    8 8.38 8.79 9.76 10.98
    9 No Standards 9.42 9.89 10.98 12.36
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    15 15.71 16.48 18.31 20.60
    0.6 2 - 4 0.9 0.56 50 10° 2.09 2.20 2.44 2.75 1
    3 No Standards 3.14 3.30 3.66 4.12
    4 4.19 4.40 4.88 5.49
    4 6 6 15° 4.13 4.26 4.56 4.91
    6 - 4 10° 6.28 6.59 7.32 8.24
    7 No Standards 7.33 7.69 8.54 9.61
    8 8.38 8.79 9.76 10.98
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    15 15.71 16.48 18.31 20.60
    18 No Standards 70 18.85 19.78 21.97 24.71
    0.7 2 - 4 1.05 0.66 50 10° 2.09 2.20 2.44 2.75 1
    4 4.19 4.40 4.88 5.49
    6 6.28 6.59 7.32 8.24
    8 8.38 8.79 9.76 10.98
    10 No Standards 10.47 10.99 12.21 13.73
    0.8 4 - 4 1.2 0.76 50 10° 4.19 4.40 4.88 5.49 1
    6 6.28 6.59 7.32 8.24
    8 8.38 8.79 9.76 10.98
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    14 No Standards 14.66 15.39 17.09 19.22
    16 No Standards 16.75 17.58 19.53 21.97
    20 No Standards 70 20.94 21.98 24.41 27.46
    24 No Standards 25.13 26.38 29.29 Without Interference
    0.9 4 - 4 No Standards 1.35 0.85 50 10° 4.19 4.40 4.88 5.49 1
    6 6.28 6.59 7.32 8.24
    8 8.38 8.79 9.76 10.98
    10 No Standards 10.47 10.99 12.21 13.73
    15 No Standards 15.71 16.48 18.31 20.60
    1 3 - 4 No Standards 1.5 0.95 50 10° 3.14 3.30 3.66 4.12 1
    4 4.19 4.40 4.88 5.49
    5 No Standards 5.24 5.49 6.10 6.87
    6 6.28 6.59 7.32 8.24
    6 6 6 15° 6.19 6.39 6.84 7.36
    7 - 4 No Standards 10° 7.33 7.69 8.54 9.61
    8 8.38 8.79 9.76 10.98
    9 No Standards 9.42 9.89 10.98 12.36
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    14 14.66 15.39 17.09 19.22
    16 16.75 17.58 19.53 21.97
    18 No Standards 70 18.85 19.78 21.97 24.71
    20 20.94 21.98 24.41 27.46
    22 No Standards 23.04 24.18 26.85 Without Interference
    25 26.18 27.47 30.51 Without Interference
    30 31.41 32.97 36.62 Without Interference
    1.2 6 - 4 1.8 1.15 50 10° 6.28 6.59 7.32 8.24 1
    8 8.38 8.79 9.76 10.98
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    16 16.75 17.58 19.53 21.97

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D
    Length Under Neck
    1
    Shank Diameter
    d
    Shank Diameter
    d
    Standard Sharp Edge Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Under Neck Angle
    θ
    Actual Effective Length Depends on Work Inclination Angle Figure
    30'
    1.4 6 - 4 No Standards 2.1 1.35 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards 8.38 8.79 9.76 10.98
    10 No Standards 10.47 10.99 12.21 13.73
    12 No Standards 12.57 13.19 14.65 16.48
    14 No Standards 14.66 15.39 17.09 19.22
    16 No Standards 16.75 17.58 19.53 21.97
    1.5 4 - 4 No Standards 2.3 1.45 50 10° 4.19 4.40 4.88 5.49 1
    6 6.28 6.59 7.32 8.24
    8 8.38 8.79 9.76 10.98
    10 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    14 14.66 15.39 17.09 19.22
    16 16.75 17.58 19.53 21.97
    18 70 18.85 19.78 21.97 24.71
    20 20.94 21.98 24.41 Without Interference
    25 No Standards 26.18 27.47 30.51 Without Interference
    30 No Standards 31.41 32.97 Without Interference Without Interference
    35 No Standards 100 36.65 38.46 Without Interference Without Interference
    40 No Standards 41.88 43.96 Without Interference Without Interference
    45 No Standards 47.12 49.45 Without Interference Without Interference
    1.6 6 - 4 No Standards 2.4 1.55 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards 8.38 8.79 9.76 10.98
    10 No Standards 10.47 10.99 12.21 13.73
    12 No Standards 12.57 13.19 14.65 16.48
    14 No Standards 14.66 15.39 17.09 19.22
    16 No Standards 16.75 17.58 19.53 21.97
    18 No Standards 70 18.85 19.78 21.97 Without Interference
    20 No Standards 20.94 21.98 24.41 Without Interference
    26 No Standards 27.22 28.57 31.73 Without Interference
    1.8 6 - 4 No Standards 2.7 1.75 50 10° 6.28 6.59 7.32 8.24 1
    8 No Standards 8.38 8.79 9.76 10.98
    10 No Standards 10.47 10.99 12.21 13.73
    12 No Standards 12.57 13.19 14.65 16.48
    14 No Standards 14.66 15.39 17.09 19.22
    16 No Standards 16.75 17.58 19.53 Without Interference
    18 No Standards 70 18.85 19.78 21.97 Without Interference
    20 No Standards 20.94 21.98 24.41 Without Interference
    25 No Standards 26.18 27.47 30.51 Without Interference
    2 6 - 4 3 1.95 50 10° 6.28 6.59 7.32 8.24 1
    8 8.38 8.79 9.76 10.98
    10 10.47 10.99 12.21 13.73
    10 6 6 15° 10.31 10.65 11.40 12.27
    12 - 4 10° 12.57 13.19 14.65 16.48
    14 14.66 15.39 17.09 19.22
    16 16.75 17.58 19.53 Without Interference
    18 70 18.85 19.78 21.97 Without Interference
    20 20.94 21.98 24.41 Without Interference
    25 26.18 27.47 Without Interference Without Interference
    30 31.41 32.97 Without Interference Without Interference
    35 No Standards 100 36.65 38.46 Without Interference Without Interference
    40 No Standards 41.88 43.96 Without Interference Without Interference
    50 No Standards 52.35 54.95 Without Interference Without Interference
    60 No Standards 62.83 Without Interference Without Interference Without Interference
    2.5 8 - 4 3.8 2.4 50 10° 8.38 8.79 9.76 10.98 1
    10 No Standards 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 Without Interference
    14 No Standards 14.66 15.39 17.09 Without Interference
    16 16.75 17.58 19.53 Without Interference
    18 No Standards 70 18.85 19.78 Without Interference Without Interference
    20 20.94 21.98 Without Interference Without Interference
    25 26.18 27.47 Without Interference Without Interference
    30 31.41 32.97 Without Interference Without Interference
    40 No Standards 100 41.88 Without Interference Without Interference Without Interference
    50 No Standards 52.35 Without Interference Without Interference Without Interference

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

    Outer Diameter
    D
    Length Under Neck
    1
    Shank Diameter
    d
    Shank Diameter
    d
    Standard Sharp Edge Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Under Neck Angle
    θ
    Actual Effective Length Depends on Work Inclination Angle Figure
    30'
    3 8 - 6 4.5 2.9 50 10° 8.38 8.79 9.76 10.98 1
    10 No Standards 10.47 10.99 12.21 13.73
    12 12.57 13.19 14.65 16.48
    14 No Standards 70 14.66 15.39 17.09 19.22
    16 16.75 17.58 19.53 21.97
    18 No Standards 18.85 19.78 21.97 24.71
    20 20.94 21.98 24.41 27.46
    25 26.18 27.47 30.51 Without Interference
    30 31.41 32.97 36.62 Without Interference
    40 100 41.88 43.96 Without Interference Without Interference
    45 No Standards 47.12 49.45 Without Interference Without Interference
    50 No Standards 52.35 54.95 Without Interference Without Interference
    4 12 - 6 6 3.8 50 10° 12.57 13.19 14.65 16.48 1
    16 16.75 17.58 19.53 Without Interference
    20 70 20.94 21.98 24.41 Without Interference
    25 No Standards 26.18 27.47 Without Interference Without Interference
    30 31.41 32.97 Without Interference Without Interference
    35 No Standards 100 36.65 38.46 Without Interference Without Interference
    40 41.88 43.96 Without Interference Without Interference
    45 No Standards 47.12 49.45 Without Interference Without Interference
    50 No Standards 52.35 54.95 Without Interference Without Interference
    5 16 - 6 7.5 4.8 70 10° 16.75 17.58 Without Interference Without Interference 1
    20 No Standards 20.94 21.98 Without Interference Without Interference
    25 26.18 27.47 Without Interference Without Interference
    30 No Standards 31.41 Without Interference Without Interference Without Interference
    35 100 36.65 Without Interference Without Interference Without Interference
    40 No Standards 41.88 Without Interference Without Interference Without Interference
    50 52.35 Without Interference Without Interference Without Interference
    6 20 - 6 9 5.8 70 10° Without Interference Without Interference Without Interference Without Interference 2
    30 Without Interference Without Interference Without Interference Without Interference
    40 100 Without Interference Without Interference Without Interference Without Interference
    50 Without Interference Without Interference Without Interference Without Interference
    60 Without Interference Without Interference Without Interference Without Interference

    [ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

    Model Number
    LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

    Outer Diameter
    D
    Length Under Neck ℓ1
    1 mm Increment Designation
    Shank Diameter
    d
    Standard Sharp Edge Flute Length
    Under Neck Diameter
    d1
    Overall Length
    L
    Figure
    1.5 8 ~ 20 4 3 1.45 40 3
    1.6 9 ~ 20 4 3.2 1.55 40 3
    1.8 9 ~ 20 4 3.6 1.75 40 3
    2 9 ~ 21 4 4 1.95 40 3
    2.5 10 ~ 22 4 5 2.4 40 3
    3 11 ~ 21 6 6 2.9 45 3
    4 13 ~ 23 6 8 3.8 45 3
    5 15 ~ 25 6 10 4.8 45 3

    [ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
    (1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

    Funkcje i przykłady użycia

    More Information


    The ideal under-neck length can be selected for workpiece machining in deep areas.
    It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.


    TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

    Numer części został potwierdzony