Tłumaczymy nasz sklep na język polski!
Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Potwierdzono
- Surface Treatment
- L Dimension Fixed, Specified
- Overall Length L(mm)[50–4000/0.5mm jedn.]
- Type
- CAD
- 2D
- 3D
- Szacowane dni wysyłki
- Wszystko
- W ciągu 5 dni robocze
Dodatkowa opcje
- Counterboring [Z](Nominal Dia. Selection)
- 6
- 8
- Add Counterbored Hole Vertically [XA](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Vertically [XB](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Vertically [XC](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Vertically [XD](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Vertically [XE](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- High Precision Cut
- Vertical Wrench Hole Machining [AV](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Vertical Wrench Hole Machining [BV](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Vertical Wrench Hole Machining [CV](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Vertical Wrench Hole Machining [DV](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Vertical Wrench Hole Machining [EV](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- D Hole Machining (Drilling Holes for Single Joint Connections)
- Wrench Hole Machining in Fixed Position
- 1 Row Crisscross from Left End Face [LCP]
- 1 Row Crisscross from Right End Face [RCP]
- 1 Row Horizontally from Left End Face [LCH]
- 1 Row Vertically from Left End Face [LCV]
- 1 Row Vertically from Right End Face [RCV]
- 2 Rows Crisscross from Left End Face [LWP]
- 2 Rows Crisscross from Right End Face [RWP]
- 2 Rows Horizontally from Left End Face [LWH]
- 2 Rows Horizontally from Right End Face [RWH]
- 2 Rows Vertically from Left End Face [LWV]
- 2 Rows Vertically from Right End Face [RWV]
- 3 Rows Crisscross from Left End Face [LEP]
- 3 Rows Crisscross from Right End Face [REP]
- 3 Rows Horizontally from Left End Face [LEH]
- 3 Rows Horizontally from Right End Face [REH]
- 3 Rows Vertically from Left End Face [LEV]
- 3 Rows Vertically from Right End Face [REV]
- Offset Fixed Hole Position for Thickness of Extrusion End Caps
- Horizontal Wrench Hole Machining [AH](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal Wrench Hole Machining [BH](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal Wrench Hole Machining [CH](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal Wrench Hole Machining [DH](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal Wrench Hole Machining [EH](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal + Vertical Wrench Hole Machining [AP](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal + Vertical Wrench Hole Machining [BP](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal + Vertical Wrench Hole Machining [CP](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal + Vertical Wrench Hole Machining [DP](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Horizontal + Vertical Wrench Hole Machining [EP](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Horizontally [YA](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Horizontally [YB](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Horizontally [YC](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Horizontally [YD](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- Add Counterbored Hole Horizontally [YE](Distance from the Left End Plane)(mm)[0–4000/0.5mm jedn.]
- L Hole Machining [JLP](Machining of L Holes Crisscross on Top Section (Pitch Configurable))(mm)[16–3978/1mm jedn.]
- Number of Holes [H](pc(s).)
- 2
- 3
- 4
- 5
- Tapped Holes on End Faces
- Fine Chamfering on Both End Faces (C0.2-0.3)
- Wrench Hole Dia. Selection(mm)
- 5
- 8
- SPW
- Tapping (Corners)
6 Series / slot width 8 / 30x30mm (HFSF6-3030-940-TPW)
Przestroga
- Cutting is free for this product. Please specify the length you prefer.
- Cena jednostkowa (bez VAT)
- 20.95 €
- Łącznie (bez VAT)
- 20.95 €Cena z VAT:24.93 €
- Data wysyłki
- 6 dni roboczeReferencyjna data wysyłki: 29.07.2025
| Ilość | 1 - 49 | 50 - 500 | 501+ |
|---|---|---|---|
| Cena jednostkowa (bez VAT) (Cena jednostkowa z VAT) | 20.95 € ( 24.93 € ) | 19.45 € ( 23.15 € ) | 19.45 € ( 23.15 € ) |
| Shipping days | 6 days | 6 days | Quote |
- * Informacje o dniach wysyłki, kosztach wysyłki i cenach.
Rysunek konturowy i tabela specyfikacji
Dimensional Drawing
EFS (Lightweight Type)
NEFS (Economy Type) HFS (Standard Type)
NEFS (Economy Type) HFS (Standard Type)
* No tolerance is specified for fixed length extrusions
| 6 Series |
 |
Product Specifications
Slot Details
(Common to All Series) Slot Bottom Details
(HFS, CAF Series) (GFS Series) (EFS Series) (NEFS, NEFSB, NFSL, GNFS Series) T Slot Dimension Enlarged View of A Enlarged View of A Enlarged View of A Enlarged View of A
(Common to All Series) Slot Bottom Details
(HFS, CAF Series) (GFS Series) (EFS Series) (NEFS, NEFSB, NFSL, GNFS Series) T Slot Dimension Enlarged View of A Enlarged View of A Enlarged View of A Enlarged View of A
[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
■The 6 Series
is an aluminum extrusion with an 8 mm slot width. Applicable to M6 bolts.
is an aluminum extrusion with an 8 mm slot width. Applicable to M6 bolts.
Configurable Length Extrusion Specification Table
| Part Number | — | L |
| EFSF6−3030 KHFSF6−3030 | — — | 800 4000 |
| Type | Material | Surface Treatment | Part Number | L 0.5 mm Increments (Tolerance ±0.5 mm) | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | HFSF6－3030 | 50 to 4000 | 0.92 | 338 | 3.03 × 104 | 2.76 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Black Anodize | HFSFB6－3030 | 50 to 4000 | 0.92 | 338 | 3.03 × 104 | 2.76 × 104 |
| EFS | EN AW-6061-T5 Equiv. | Clear Anodize | EFSF6－3030 | 50 to 4000 | 0.86 | 320 | 3.06 × 104 | 2.8 × 104 |
| EFS | EN AW-6061-T5 Equiv. | Black Anodize | EFSFB6－3030 | 50 to 4000 | 0.86 | 320 | 3.06 × 104 | 2.8 × 104 |
| NEFS | EN AW-6063-T5 Equiv. | Clear Anodize | NEFSF6－3030 | 50 to 4000 | 0.86 | 320 | 3.06 × 104 | 2.8 × 104 |
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.
Fixed Length Extrusion (Effective Length 4,000 mm) Specification Table
[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.| Type | Material | Surface Treatment | Part Number | Lmm (No tolerance regulation) | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | KHFSF6－3030 | 4000 | 338 | 3.03 × 104 | 2.76 × 104 |
| HFS | EN AW-6061-T5 Equiv. | Black Anodize | KHFSFB6－3030 | 4000 | 338 | 3.03 × 104 | 2.76 × 104 |
| EFS | EN AW-6061-T5 Equiv. | Clear Anodize | KEFSF6－3030 | 4000 | 320 | 3.06 × 104 | 2.8 × 104 |
| EFS | EN AW-6061-T5 Equiv. | Black Anodize | KEFSFB6－3030 | 4000 | 320 | 3.06 × 104 | 2.8 × 104 |
| NEFS | EN AW-6063-T5 Equiv. | Clear Anodize | KNEFSF6－3030 | 4000 | 320 | 3.06 × 104 | 2.8 × 104 |
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.
Alterations
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.Some alterations are not applicable depending on types and sizes.
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > End Tapping | End Tapping (Center Hole) | LTP/RTP/TPW LHP/RHP/HPW |  | Adds tapped holes on extrusion ends. Blind Joints which require this alteration (Screw Joint / Simple Joint) |
| End Tapping (4 Side Holes) | LSP/RSP/SPW |  | Adds tapped holes on extrusion corner ends. | |
| > Cutting Method Change | High Precision Cut | SC |  | Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500 |
| 45-Degree Cut | L□T45/R□T45 |  | Cuts with 45-degree angle. | |
| > Drill Wrench Hole | Wrench Hole in Fixed Position | LWP/RWP |  | Wrench access hole(s) for Blind Joints are drilled. The hole location will be aligned with the mating extrusion’s tapped hole location. Blind Joints which require this alteration (Screw Joint / Single Joint / Tapping Joint) |
| Extrusion End Cap The hole position moves by thickness | FL/FR |  | Offsets the wrench access hole for the thickness of Extrusion End Cap (3 mm). The extrusion end cap will be flat with the adjacent extrusion surface. | |
| Wrench Hole in Specified Position | AH/BH/AV/BV |  | Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc. | |
| > Counterboring | Counterbores in Specified Position | Z6/XA100 |  | Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc. |
| > Blind Joints Dedicated Holes | D Hole | LDH/RDH |  | Adds required holes for Single Joint connections. (Single Joints) |
| S Hole | LSH |  | Adds required holes for Pre-Assembly. Insertion Double Joint connections. (Pre-Assembly Insertion Double Joints) | |
| M Hole | LMH |  | Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections. (Post-Assembly Insertion Double Joint / Center Joint) | |
| L Hole | JLP |  | Adds required holes for Parallel Joint connections. (Parallel Joints) | |
| > Other Machining | GNFS Series GFS Series End Tapping | LTS/RTS/TSW |  | Adds tapped holes on extrusion ends. This process is required for using extrusion end cap of the high rigidity plate type. (Plates for High Rigidity Type) |
| HFSR End Tapping | LTS/RTS/TSW |  | Necessary alteration to use Ends Protection Plates for HFSR series. | |
| End Face C Chamfering | CW |  | Adds C Chamfering on extrusion ends. | |
| Labeling | ZZZ |  | Adds a sticker with catalog No. etc. on the aluminum extrusions. Although number of characters are limited, customer's own serial number or unit number can be labeled. |
Szczegółowe informacje
Podstawowe informacje
Przestroga
- Cutting is free for this product. Please specify the length you prefer.
Podobne produktyZobacz wszystkie podobne produkty
Nie znaleziono podobnych produktów dla tej pozycji. Numer części został potwierdzony