Warunki filtrowania

[D] Diameter (Shaft)(mm)
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 30
- 35
- 40
- 50
[L] Length (Shaft)(mm)
[20–1500/1mm jedn.]
Material
Unalloyed Steel
EN 1.1191 Equiv.
Stainless Steel (austenitic)
EN 1.4301 Equiv.
Heat Treatment
- No Treatment
Surface Treatment
- Hard Chrome Plating
ISO Tolerance
Hardness
- No Induction Hardening
[M] Size (thread - depth 2xM)(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 30
[MD] Size (thread - depth 3xM)(mm)
- 6
- 8
- 10
- 12
- 16
- 20
[MSC] Size (fine thread - depth 2xMSC)(mm)
- 8
- 10
- 12
- 14
- 18
[N] Size (thread - depth 2xN)(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 30
[ND] Size (thread - depth 3xN)(mm)
- 6
- 8
- 10
- 12
- 16
- 20
[NSC] Size (fine thread - depth 2xN)(mm)
- 8
- 10
- 12
- 14
- 18
Type
- PSFGW
- PSSFGW
CAD
- 2D
- 3D
Szacowane dni wysyłki
- Wszystko
- W ciągu 4 dni robocze
- W ciągu 6 dni robocze
- W ciągu 7 dni robocze
- W ciągu 8 dni robocze

Linear shafts / double-sided internal thread

KatalogS. 1-119

Numer części:

Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 180.

Rysunek konturowy i tabela specyfikacji
Lista numerów części
Szczegółowe informacje
Katalog

Rysunek konturowy i tabela specyfikacji

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type			Material	Hardness	Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	Material	Hardness	Surface Treatment
SFJW	SFUW	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4125 Equiv. 56HRC~	-
SSFJW	SSFUW	-	EN 1.4125 Equiv.		-
PSFJW	PSFUW	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFJW	PSSFUW	-	EN 1.4125 Equiv.
RSFJW	-	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSFGW	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More
-	-	PSSFGW	EN 1.4301 Equiv.	-

Part Number			L specified in 1mm Increment	M (Coarse), N (Coarse) Selection													D Tol.			C
Type		D	L specified in 1mm Increment	M (Coarse), N (Coarse) Selection													g6	h5	f8	C
(D Tolerance g6) SFJW SSFJW PSFJW PSSFJW (D Tolerance f8) PSFGW PSSFGW	(D Tolerance h5) SFUW SSFUW PSFUW PSSFUW	4	20~ 300	2													-0.004 -0.012	0 -0.005	-	0.2 or Less
		5	20~ 400		2.6	3											-0.004 -0.012	0 -0.005	-	0.2 or Less
		6	20~ 600			3											-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	20~ 800			3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	20~ 800			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	20~1000				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	25~1000				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	25~1000				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200				4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200				4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		25	35~1200				4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

L requires Mx2+Nx2≤L. When Mx2.5+4+Nx2.5+4≥L, tap pilot holes may go through.

Part Number		L specified in 1mm Increment	M (Coarse), N (Coarse) Selection											D Tol.	C
Type	D	L specified in 1mm Increment	M (Coarse), N (Coarse) Selection											g6	C
(D Tolerance g6) LTBC Plating RSFJW	4	20~300	2											-0.004 -0.012	0.2 or Less
	5	20~400		2.6	3									-0.004 -0.012	0.2 or Less
	6	20~500			3									-0.004 -0.012	0.5 or Less
	8	20~500			3	4	5							-0.005 -0.014	0.5 or Less
	10	20~500			3	4	5	6						-0.005 -0.014	0.5 or Less
	12	20~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	13	25~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	15	25~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	16	30~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	18	30~500				4	5	6	8	10	12			-0.006 -0.017	0.5 or Less
	20	30~500				4	5	6	8	10	12			-0.007 -0.020	1.0 or Less
	25	35~500				4	5	6	8	10	12	16		-0.007 -0.020	1.0 or Less
	30	35~500						6	8	10	12	16	20	-0.007 -0.020	1.0 or Less

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	M	-	N
SFJW8 SSFJW20	- -	200 500	- -	M4 M6	- -	N4 N10

Alterations - Linear Shafts

Both Ends Tapped:Related Image

You find further options in detail under Option Overview.

Lista numerów części

Liczba pozycji

Dalej

Numer części

PSFGW6-[20-600/1]-M3-N3

PSFGW8-[20-800/1]-M[3,4,5]-N[3,4,5]

PSFGW10-[20-800/1]-M[3,4,5,6]-N[3,4,5,6]

PSFGW10-[20-800/1]-M[3,4,5,6]-ND6

PSFGW10-[20-800/1]-MD6-N[3,4,5,6]

PSFGW10-[20-800/1]-MD6-ND6

PSFGW12-[20-1000/1]-M[4,5,6,8]-N[4,5,6,8]

PSFGW12-[20-1000/1]-M[4,5,6,8]-ND[6,8]

PSFGW12-[20-1000/1]-M[4,5,6,8]-NSC8

PSFGW12-[20-1000/1]-MD[6,8]-N[4,5,6,8]

PSFGW12-[20-1000/1]-MD[6,8]-ND[6,8]

PSFGW12-[20-1000/1]-MD[6,8]-NSC8

PSFGW12-[20-1000/1]-MSC8-N[4,5,6,8]

PSFGW12-[20-1000/1]-MSC8-ND[6,8]

PSFGW12-[20-1000/1]-MSC8-NSC8

PSFGW13-[25-1000/1]-M[4,5,6,8]-N[4,5,6,8]

PSFGW13-[25-1000/1]-M[4,5,6,8]-ND[6,8]

PSFGW13-[25-1000/1]-M[4,5,6,8]-NSC8

PSFGW13-[25-1000/1]-MD[6,8]-N[4,5,6,8]

PSFGW13-[25-1000/1]-MD[6,8]-ND[6,8]

PSFGW13-[25-1000/1]-MD[6,8]-NSC8

PSFGW13-[25-1000/1]-MSC8-N[4,5,6,8]

PSFGW13-[25-1000/1]-MSC8-ND[6,8]

PSFGW13-[25-1000/1]-MSC8-NSC8

PSFGW15-[25-1200/1]-M[4,5,6,8,10]-N[4,5,6,8,10]

PSFGW15-[25-1200/1]-M[4,5,6,8,10]-ND[6,8,10]

PSFGW15-[25-1200/1]-M[4,5,6,8,10]-NSC[8,10]

PSFGW15-[25-1200/1]-MD[6,8,10]-N[4,5,6,8,10]

PSFGW15-[25-1200/1]-MD[6,8,10]-ND[6,8,10]

PSFGW15-[25-1200/1]-MD[6,8,10]-NSC[8,10]

PSFGW15-[25-1200/1]-MSC[8,10]-N[4,5,6,8,10]

PSFGW15-[25-1200/1]-MSC[8,10]-ND[6,8,10]

PSFGW15-[25-1200/1]-MSC[8,10]-NSC[8,10]

PSFGW16-[30-1200/1]-M[4,5,6,8,10]-N[4,5,6,8,10]

PSFGW16-[30-1200/1]-M[4,5,6,8,10]-ND[6,8,10]

PSFGW16-[30-1200/1]-M[4,5,6,8,10]-NSC[8,10]

PSFGW16-[30-1200/1]-MD[6,8,10]-N[4,5,6,8,10]

PSFGW16-[30-1200/1]-MD[6,8,10]-ND[6,8,10]

PSFGW16-[30-1200/1]-MD[6,8,10]-NSC[8,10]

PSFGW16-[30-1200/1]-MSC[8,10]-N[4,5,6,8,10]

PSFGW16-[30-1200/1]-MSC[8,10]-ND[6,8,10]

PSFGW16-[30-1200/1]-MSC[8,10]-NSC[8,10]

PSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]

PSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]

PSFGW18-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12]

PSFGW18-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]

PSFGW18-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]

PSFGW18-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12]

PSFGW18-[30-1200/1]-MSC[8,10,12]-N[4,5,6,8,10,12]

PSFGW18-[30-1200/1]-MSC[8,10,12]-ND[6,8,10,12]

PSFGW18-[30-1200/1]-MSC[8,10,12]-NSC[8,10,12]

PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]

PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]

PSFGW20-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]

PSFGW20-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]

PSFGW20-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]

PSFGW20-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12,14]

PSFGW20-[30-1200/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]

PSFGW20-[30-1200/1]-MSC[8,10,12,14]-ND[6,8,10,12]

PSFGW20-[30-1200/1]-MSC[8,10,12,14]-NSC[8,10,12,14]

[D] Diameter (Shaft)

(mm)

[L] Length (Shaft)

(mm)

Material

Heat Treatment

Surface Treatment

ISO Tolerance

Hardness

[M] Size (thread - depth 2xM)

(mm)

[MD] Size (thread - depth 3xM)

(mm)

[MSC] Size (fine thread - depth 2xMSC)

(mm)

[N] Size (thread - depth 2xN)

(mm)

[ND] Size (thread - depth 3xN)

(mm)

[NSC] Size (fine thread - depth 2xN)

(mm)

RoHS?

Minimalna wielkość zamówienia

6	20 ～ 600	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	3	-	-	3	-	-	10	1 szt.
8	20 ～ 800	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	3 ～ 5	-	-	3 ～ 5	-	-	10	1 szt.
10	20 ～ 800	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	3 ～ 6	-	-	3 ～ 6	-	-	10	1 szt.
10	20 ～ 800	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	3 ～ 6	-	-	-	6	-	10	1 szt.
10	20 ～ 800	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6	-	3 ～ 6	-	-	10	1 szt.
10	20 ～ 800	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6	-	-	6	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	4 ～ 8	-	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	-	6 ～ 8	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	-	-	8	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	4 ～ 8	-	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	-	6 ～ 8	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	-	-	8	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	4 ～ 8	-	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	-	6 ～ 8	-	10	1 szt.
12	20 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	-	-	8	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	4 ～ 8	-	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	-	6 ～ 8	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 8	-	-	-	-	8	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	4 ～ 8	-	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	-	6 ～ 8	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 8	-	-	-	8	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	4 ～ 8	-	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	-	6 ～ 8	-	10	1 szt.
13	25 ～ 1000	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8	-	-	8	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	4 ～ 10	-	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	-	6 ～ 10	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	-	-	8 ～ 10	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	4 ～ 10	-	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	-	6 ～ 10	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	-	-	8 ～ 10	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	4 ～ 10	-	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	-	6 ～ 10	-	10	1 szt.
15	25 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	-	-	8 ～ 10	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	4 ～ 10	-	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	-	6 ～ 10	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 10	-	-	-	-	8 ～ 10	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	4 ～ 10	-	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	-	6 ～ 10	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 10	-	-	-	8 ～ 10	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	4 ～ 10	-	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	-	6 ～ 10	-	10	1 szt.
16	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 10	-	-	8 ～ 10	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	4 ～ 12	-	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	-	6 ～ 12	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	-	-	8 ～ 12	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	4 ～ 12	-	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	-	6 ～ 12	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	-	-	8 ～ 12	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 12	4 ～ 12	-	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 12	-	6 ～ 12	-	10	1 szt.
18	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 12	-	-	8 ～ 12	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	4 ～ 12	-	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	-	6 ～ 12	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	4 ～ 12	-	-	-	-	8 ～ 14	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	4 ～ 12	-	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	-	6 ～ 12	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	6 ～ 12	-	-	-	8 ～ 14	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 14	4 ～ 12	-	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 14	-	6 ～ 12	-	10	1 szt.
20	30 ～ 1200	[Unalloyed Steel] EN 1.1191 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	-	8 ～ 14	-	-	8 ～ 14	10	1 szt.

Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)	Standardowa data wysyłki

- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze
- ( - )	6 dni robocze

Dalej

Szczegółowe informacje

Podstawowe informacje

Podstawowe informacje

Przestroga

SFJW has been localized according to European needs and requirements. Please have a look on the EU version SFJWEU. SFJWEU is available in EN 1.1213 (Cf53) and h6 / h7.

Dane techniczne

Katalog

Products homepage

Katalog (arkusz dwustronny)