Part Number | - | M | - | A |
HNFJN28 | - | 8 | - | 50 |
Part Number | M (Coarse) | A | Extrusion * | H | ℓ 1 | ℓ 2 | B | Allowable Vertical Load (kN) | Mass (g) | Unit Price | ||||||
Type | D | HNFJN | HNFJR | HNFJN | HNFJR | HNFJN | HNFJR | |||||||||
HNFJN HNFJR (Rotary Type) | 28 | 8 | 20 | 50 | 100 | 30 Square | 17.7 | 28.2 | 5.2 | 6.5 | 13 | 6.5 | 48 | 50 | ||
38 | 12 | 30 | 80 | 100 | 40 Square | 23 | 35.4 | 7.4 | 10 | 19 | 13 | 55 | 59 | |||
48 | 8 | 20 | 50 | 100 | 50 Square | 20.7 | 33.2 | 5.2 | 6.5 | 13 | 6.5 | 77 | 73 | |||
12 | 30 | 80 | 100 | 23 | 35.4 | 7.4 | 10 | 19 | 13 | 90 | 85 | |||||
58 | 8 | 20 | 50 | 100 | 60 Square | 20.7 | 33.2 | 5.2 | 6.5 | 13 | 6.5 | 121 | 115 | |||
12 | 30 | 80 | 100 | 23 | 35.4 | 7.4 | 10 | 19 | 13 | 133 | 129 | |||||
* Can be used for the end of extrusions with 1 tapped hole alterations for mounting. Cannot be mounted to extrusions with multiple tapped holes on ends. |