Strona główna MISUMI
Automation Components
Linear Motion
Linear Shafts
Linear shafts / internal thread on one side / spanner flat

Warunki filtrowania

[D] Diameter (Shaft)(mm)
- 4
- 5
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 18
- 20
- 25
- 30
[L] Length (Shaft)(mm)
[20–500/1mm jedn.]
Material
Alloyed Steel
EN 1.3505 Equiv.
Stainless Steel (martensitique)
EN 1.4037 Equiv.
Surface Treatment
Hardness
- Induction Hardening (56HRC~)
- Induction Hardening (58HRC~)
[SC] Distance (wrench flat)(mm)
[0–440/1mm jedn.]
[MSC] Size (fine thread - depth 2xMSC)(mm)
- 8
- 10
- 12
- 14
- 18
[MD] Size (thread - depth 3xM)(mm)
- 6
- 8
- 10
- 12
- 16
- 20
[M] Size (thread - depth 2xM)(mm)
- 2
- 2.6
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
Type
- VFJC
- VFJT
- VPFJC
- VPFJT
- VPSFJC
- VPSFJT
- VRJC
- VRJT
- VSFJC
- VSFJT
CAD
- 2D
- 3D
Szacowane dni wysyłki
- Wszystko
- W ciągu 7 dni robocze
- W ciągu 9 dni robocze
- W ciągu 10 dni robocze

MISUMI

Linear shafts / internal thread on one side / spanner flat

KatalogS. 1-193

Numer części:

Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 290.

Rysunek konturowy i tabela specyfikacji
Lista numerów części
Szczegółowe informacje
Katalog

Rysunek konturowy i tabela specyfikacji

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Precision/One End Tapped/One End Tapped with Wrench Flats:Related Image

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type			Material	Hardness	Surface Treatment
W/o Wrench Flats	With Wrench Flats	D Tol.	Material	Hardness	Surface Treatment
VFJT	VFJC	g6	EN 1.3505 Equiv.	Induction Hardened Effective Hardened Depth >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~	-
VSFJT	VSFJC		EN 1.4037 Equiv.		-
VPFJT	VPFJC		EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness HV750 ~ Plating Thickness: 5µ or More
VPSFJT	VPSFJC		EN 1.4037 Equiv.
VRJT	VRJC		EN 1.3505 Equiv.		LTBC Plating

D Tol.
D	g6
4	-0.004 -0.012
5
6
8	-0.005 -0.014
10	-0.005 -0.014
12	-0.006 -0.017
13
15
16
18
20	-0.007 -0.020
25
30

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	M	-	SC
VFJT20 VFJC20	- -	100 100	- -	M8 M8	- -	SC10

Alterations - Linear Shafts

Precision/One End Tapped/One End Tapped with Wrench Flats:Related Image

You find further options in detail under Option Overview.

Lista numerów części

Liczba pozycji

Dalej

Numer części

VFJC6-[20-350/1]-M3-SC[0-292/1]

VFJC8-[20-350/1]-M[3,4,5]-SC[0-292/1]

VFJC10-[20-400/1]-M[3,4,5,6]-SC[0-342/1]

VFJC10-[20-400/1]-MD6-SC[0-342/1]

VFJC12-[20-500/1]-M[4,5,6,8]-SC[0-340/1]

VFJC12-[20-500/1]-MD[6,8]-SC[0-340/1]

VFJC12-[20-500/1]-MSC8-SC[0-340/1]

VFJC13-[20-400/1]-M[4,5,6,8]-SC[0-340/1]

VFJC13-[20-400/1]-MD[6,8]-SC[0-340/1]

VFJC13-[20-400/1]-MSC8-SC[0-340/1]

VFJC15-[20-500/1]-M[4,5,6,8,10]-SC[0-340/1]

VFJC15-[20-500/1]-MD[6,8,10]-SC[0-340/1]

VFJC15-[20-500/1]-MSC[8,10]-SC[0-340/1]

VFJC16-[20-500/1]-M[4,5,6,8,10]-SC[0-390/1]

VFJC16-[20-500/1]-MD[6,8,10]-SC[0-390/1]

VFJC16-[20-500/1]-MSC[8,10]-SC[0-390/1]

VFJC18-[20-400/1]-M[4,5,6,8,10,12]-SC[0-340/1]

VFJC18-[20-400/1]-MD[6,8,10,12]-SC[0-340/1]

VFJC18-[20-400/1]-MSC[8,10,12]-SC[0-340/1]

VFJC20-[25-500/1]-M[4,5,6,8,10,12]-SC[0-440/1]

VFJC20-[25-500/1]-MD[6,8,10,12]-SC[0-440/1]

VFJC20-[25-500/1]-MSC[8,10,12,14]-SC[0-440/1]

VFJC25-[25-500/1]-M[4,5,6,8,10,12,16]-SC[0-440/1]

VFJC25-[25-500/1]-MD[6,8,10,12,16]-SC[0-440/1]

VFJC25-[25-500/1]-MSC[8,10,12,14,18]-SC[0-440/1]

VFJC30-[25-500/1]-M[6,8,10,12,16,20]-SC[0-435/1]

VFJC30-[25-500/1]-MD[6,8,10,12,16,20]-SC[0-435/1]

VFJC30-[25-500/1]-MSC[8,10,12,14,18]-SC[0-435/1]

VFJT4-[25-200/1]-M2

VFJT5-[25-300/1]-M[2.6,3]

VFJT6-[20-350/1]-M3

VFJT8-[20-500/1]-M[3,4,5]

VFJT10-[20-500/1]-M[3,4,5,6]

VFJT10-[20-500/1]-MD6

VFJT12-[20-500/1]-M[4,5,6,8]

VFJT12-[20-500/1]-MD[6,8]

VFJT12-[20-500/1]-MSC8

VFJT13-[20-400/1]-M[4,5,6,8]

VFJT13-[20-400/1]-MD[6,8]

VFJT13-[20-400/1]-MSC8

VFJT15-[20-500/1]-M[4,5,6,8,10]

VFJT15-[20-500/1]-MD[6,8,10]

VFJT15-[20-500/1]-MSC[8,10]

VFJT16-[20-500/1]-[M10,MSC8,MSC10]

VFJT16-[20-500/1]-M[4,5,6,8]

VFJT16-[20-500/1]-MD[6,8,10]

VFJT18-[20-400/1]-M[4,5,6,8,10,12]

VFJT18-[20-400/1]-MD[6,8,10,12]

VFJT18-[20-400/1]-MSC[8,10,12]

VFJT20-[25-500/1]-M[4,5,6,8,10,12]

VFJT20-[25-500/1]-MD[6,8,10,12]

VFJT20-[25-500/1]-MSC[8,10,12,14]

VFJT25-[25-500/1]-M[4,5,6,8,10,12,16]

VFJT25-[25-500/1]-MD[6,8,10,12,16]

VFJT25-[25-500/1]-MSC[8,10,12,14,18]

VFJT30-[25-500/1]-M[6,8,10,12,16,20]

VFJT30-[25-500/1]-MD[6,8,10,12,16,20]

VFJT30-[25-500/1]-MSC[8,10,12,14,18]

VPFJC6-[20-350/1]-M3-SC[0-292/1]

VPFJC8-[20-500/1]-M[3,4,5]-SC[0-292/1]

[D] Diameter (Shaft)

(mm)

[L] Length (Shaft)

(mm)

Material

Surface Treatment

Hardness

[SC] Distance (wrench flat)

(mm)

[MSC] Size (fine thread - depth 2xMSC)

(mm)

[MD] Size (thread - depth 3xM)

(mm)

[M] Size (thread - depth 2xM)

(mm)

RoHS?

Minimalna wielkość zamówienia

6	20 ～ 350	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 292	-	-	3	10	1 szt.
8	20 ～ 350	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 292	-	-	3 ～ 5	10	1 szt.
10	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 342	-	-	3 ～ 6	10	1 szt.
10	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 342	-	6	-	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	-	4 ～ 6	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	6	-	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	8	-	-	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	-	4 ～ 8	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	6 ～ 8	-	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	8	-	-	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	-	4 ～ 6	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	6	-	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	8	-	-	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 390	-	-	4 ～ 6	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 390	-	6	-	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 390	8	-	-	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	-	4 ～ 12	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	-	6 ～ 12	-	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 340	8 ～ 12	-	-	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	-	-	4 ～ 6	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	-	6	-	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	8	-	-	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	-	-	4 ～ 16	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	-	6	-	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 440	8	-	-	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 435	-	-	6 ～ 16	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 435	-	6	-	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	0 ～ 435	8	-	-	10	1 szt.
4	25 ～ 200	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	2	10	1 szt.
5	25 ～ 300	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	2.6 ～ 3	10	1 szt.
6	20 ～ 350	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	3	10	1 szt.
8	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	3 ～ 4	10	1 szt.
10	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	3 ～ 6	10	1 szt.
10	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 6	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
12	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 8	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6 ～ 8	-	10	1 szt.
13	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 6	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
15	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	-	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 6	10	1 szt.
16	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 12	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6 ～ 12	-	10	1 szt.
18	20 ～ 400	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8 ～ 12	-	-	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 6	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	4 ～ 16	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	-	6 ～ 16	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	-	6	-	10	1 szt.
30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	No Treatment	Induction Hardening (58HRC~)	-	8	-	-	10	1 szt.
6	20 ～ 350	[Alloyed Steel] EN 1.3505 Equiv.	Hard Chrome Plating	Induction Hardening (58HRC~)	0 ～ 292	-	-	3	10	1 szt.
8	20 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Hard Chrome Plating	Induction Hardening (58HRC~)	0 ～ 292	-	-	3 ～ 4	10	1 szt.

Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)	Standardowa data wysyłki

- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	7 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze
- ( - )	10 dni robocze

Dalej

Podstawowe informacje

Dane techniczne

Kontury i specyfikacja

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

Overview of the shaft designs as PDF

Part Number			L specified in 1mm Increment	M (Coarse), N (Coarse) Selection											Wrench Flats Dimensions			C
Type		D	L specified in 1mm Increment	M (Coarse), N (Coarse) Selection											SC	W	ℓ₁	C
(W/o Wrench Flats) (D4~D30) VFJT VSFJT VPFJT VPSFJT VRJT	(With Wrench Flats) (D6~D30) VFJC VSFJC VPFJC VPSFJC VRJC	4	25~200	2											-	-	-	0.2 or Less
		5	25~300		2.6	3									-	-	-	0.2 or Less
		6	25~300			3									SC=1mm Increment SC+ℓ₁≤L SC≥0 Details of Wrench Flats >>P.112	5	8	0.5 or Less
		8	25~300			3	4	5								7
		10	25~350			3	4	5	6							8
		12	25~350				4	5	6	8						10	10
		13	25~350				4	5	6	8						11
		15	25~350				4	5	6	8	10					13
		16	25~350				4	5	6	8	10					14
		18	25~350				4	5	6	8	10	12				16
		20	30~450				4	5	6	8	10	12				17		1.0 or Less
		25	30~450				4	5	6	8	10	12	16			22
		30	30~450						6	8	10	12	16	20		27	15

For overall length L, when Mx2.5+4≥L, tap pilot holes may go through.

Alterations - Linear Shafts

Precision/One End Tapped/One End Tapped with Wrench Flats:Related Image

You find further options in detail under Option Overview.

Katalog

Products homepage

Katalog (arkusz dwustronny)