Cam Followers / Hex Socket on Head / Thread / Flat Type (CFFH12-30)

Click on this image to zoom in.

Volume Discount

MISUMI

Product Details:

Manufacturer part number: CFFH12-30

Brand: MISUMI

Price: 20.16 €

Delivery time: Same day

Technical Data:

Characteristics/Applications: Not Applicable

O.D. D: 30 φ

Width B: 14 mm

Material: [Carbon steel] EN 1.3505 Equiv.

Basic Load Rating Cr (Dynamic): 7.87 kN

Order quantities extended (D-JIT)
Stock

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

CFFH12-30

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Drawing

(*)

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

D	Tolerance
30	0 －0.009
32 to 47	0 －0.011
52 to 80	0 －0.013
80 to 90	0 －0.015

■With Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

■No Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

Type			[M] Material	[A] Accessory
Application	With Seal	No Seal	[M] Material	[A] Accessory
General	CFFH	CFAH	EN 1.3505 Equiv.	Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide)
General	CFFSH	CFASH	EN 1.4125 Equiv.	Hex Nut 1 pc. (EN 1.4301 Equiv.)
Low Dust Generation	CFFCH	—	EN 1.4125 Equiv.	Hex Nut 1 pc. (EN 1.4301 Equiv.)
Heavy Load	CFFGH	—	EN 1.3505 Equiv.	Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide)

·Use THK Grease Gun Unit MG70 Attachment Type P when replenishing grease from the grease nipple.
·Operating Temperature Range: −15°C to 80°C (If the temperature exceeds 80°C, plastic and rubber parts may be deformed or damaged)

Specification Table

Part Number	—	D
CFFH20	—	52

Part Number			D	M × Pitch	B	B₁	L	d₁	ℓ	ℓ₁	r	f (Min.)	H	Mass (g)	Max. Tightening Torque (N⋅m)
Type	d_h7 Tolerance		(Selectable)
(With Seal) CFFH CFFSH CFFCH CFFGH (No Seal) CFAH CFASH	12	0 −0.018	30	12 × 1.5	14	15	40	3	14	6	1.5	20	6	105 (107)	29.4
			32											115 (117)
	16		35	16 × 1.5	18	19.5	52		18	8		24		205 (207)	70.6
	18		40	18 × 1.5	20	21.5	58		20			26		295 (300)	98
	20	0 −0.021	47	20 × 1.5	24	25.5	66	4	22	9		36	8	450 (455)	137
			52											525 (530)
	24		62	24 × 1.5	29	30.5	80		25	11		40		915 (925)	245※
			72											1150 (1160)
	30		80	30 × 1.5	35	37	100		32	15	2	46		1880 (1890)	480※
			85											1950 (1960)
			90											2000 (2010)

* When using stainless steel, it will be up to 70% of this value.
[ ! ] ( ) is the weight of Heavy Load Type.
[ ! ] 1 N⋅m = 0.102 kgf·m.

Part Number Substitution Table for Cam Follower Standard Changes (D30 to 40, 52 only)

Type	Old Part Number (D30 to 40, 52 only)			New Part Number
Type	Old Standard	Old Hex Socket Type	Old Threaded Section With Hex Socket	Head and Thread With Hex Socket
Cam Followers	CFUR	CFUA	CFUB	CFUH
	CFURS	CFUAS	—	CFUSH
	CFURC	CFUAC	—	CFUCH
	—	CFUAG	—	CFUGH
	CFU	CUA	—	CUH
	CFUS	CUAS	—	CUSH
	CFFR	CFFA	CFFB	CFFH
	CFFRS	CFFAS	—	CFFSH
	CFFRC	CFFAC	—	CFFCH
	—	CFFAG	—	CFFGH
	CFR	CFA	—	CFAH
	CFRS	CFAS	—	CFASH

Table 1: Reference Data of Cam Followers

d-D	General								Heavy Load
	Basic Dynamic Load Rating Load C (kN)	Basic Static Load Rating Load Cor (kN)	Max. Allowable Load (kN)	Track Load Capacity (kN)		Max. Rotational Speed (rpm)		Mass (g)	Basic Dynamic Load Rating Load C (kN)	Basic Static Load Rating Load Cor (kN)	Max. Allowable Load (kN)	Track Load Capacity (kN)		Max. Rotational Speed With Seal (rpm)	Mass (g)
				Track Load Capacity (kN)		With Seal	No Seal					Track Load Capacity (kN)
				Crowned	Flat	With Seal	No Seal					Crowned	Flat
3−10	1.47	1.18	0.36	0.37	1.37	32900	47000	4.5	—	—	—	—	—	—	—
4−12	2.06	2.05	0.78	0.47	1.76	25900	37000	7.5	—	—	—	—	—	—	—
5−13	3.14	2.77	1.42	0.53	2.25	20300	29000	10.5	—	—	—	—	—	—	—
6−16	3.59	3.58	2.11	1.08	3.43	17500	25000	18.5	6.94	8.5	2.11	1.08	3.43	7700	19
8−19	4.17	4.65	4.73	1.37	4.02	14000	20000	28.5	8.13	11.2	4.73	1.37	4.02	6090	29
10−22	5.33	6.78	5.81	1.67	4.7	11900	17000	45	9.42	14.3	5.81	1.67	4.7	5040	46
10−26	5.33	6.78	5.81	2.06	5.49	11900	17000	60	9.42	14.3	5.81	2.06	5.49	5040	61
12−30	7.87	9.79	9.37	2.45	7.06	9800	14000	105	13.4	19.8	9.37	2.45	7.06	4060	107
12−32	7.87	9.79	9.37	2.74	7.45	9800	14000	115	13.4	19.8	9.37	2.74	7.45	4060	117
16−35	12	18.3	17.3	3.14	11.2	7000	10000	205	20.6	37.6	17.3	3.14	11.2	3150	207
18−40	14.7	25.2	26.1	3.72	14.4	5950	8500	295	25.2	51.3	26.1	3.72	14.4	2660	300
20-47	20.7	34.8	32.1	7.15	21	4900	7000	450	33.2	64.8	32.1	7.15	21	2380	455
20−52	20.7	34.8	32.1	8.23	23.2	4900	7000	525	33.2	64.8	32.1	8.23	23.2	2380	530
24-62	30.6	53.2	49.5	10.5	34.2	4550	6500	915	46.7	92.9	49.5	10.5	34.2	2030	925
24-72	30.6	53.2	49.5	12.9	39.8	4550	6500	1150	46.7	92.9	49.5	12.9	39.8	2030	1160
30-80	45.4	87.6	73.7	14.9	52.6	3500	5000	1880	67.6	145	73.7	14.9	52.6	1610	1890
30-85				16.1	56			1950				16.1	56		1960
30-90				17.3	59.3			2000				17.3	59.3		2010

[!] kgf = N × 0.101972

Cautions / Prohibitions

·Dropping or hitting may damage the product.
·Please note that when shock was applied, the product may lose its function even though there is no visible damage outside.
·Cam Followers can bear radial load, but they are not designed to support thrust load. Please avoid using them to bear thrust load.
·Some types are not filled with grease depending on the size.
See the table below and lubricate the ones not filled with the grease before using them.

·Grease Performance and Operation Temperature of Cam Followers

		General Purpose Grease Filled (AFB-LF Grease)	Low Dust Generation Grease Filled (AFE-CA Grease)
Grease Performance	Thickener	Lithium Soap	Urea Inductor
	Base Oil	Refined Mineral Oil	Synthetic Oil
	Base Oil Dynamic Viscosity (40°C, mm²/s)	170	100
	Worked Penetration (25°C ·60W)	275	260
	Dropping Point (°C)	193	258
	Evaporation Amount: wt% (99°C, 22 h)	0.36	0.1
	Oil Separation: wt% (100°C, 24 h)	0.6	0.8
Operating Temperature (°C)	In Air	−15 to +100	−40 to +160
Operating Temperature (°C)	In Vacuum	Unsuitable	Unsuitable

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
CFFH12-30

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Characteristics/Applications	O.D. D (φ)	Width B (mm)	Material	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (1/min)	Seals	Application	Cam Follower Stud Thread (Fine) (mm)	Rolling Guide Method
	20.16 €	1	Available	Same day Stock	10	Not Applicable	30	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer

Products homepage

Basic information

Classification	Cam Followers	Environmentally friendly	RoHS Compliant (10 Substances)	Roller Type	Flat Type
Fastening Methods	Hex Socket on Head Thread	Roller Outer Circumference	Not Provided	Cam Follower Mounting Shaft Position	Standard
Cam Follower Additional Function	None	Cam Follower Lubrication Method	None	Size Standard	Metric Series
Shaft	Provided

This page is Cam Followers / Hex Socket on Head / Thread / Flat Type, part number CFFH12-30.
You can find the detail information about specifications and dimensions on part number CFFH12-30.

Configure

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

Type
- CFAH
- CFASH
- CFFCH
- CFFGH
- CFFH
- CFFSH
Clear
Characteristics/Applications
Low Dust Generation

Corrosion Resistant / Chemical Resistant

Heat Resistance

Not Applicable
Clear
O.D. D(φ)
30

32

35

40

47

52

62

72

80

85

90
Clear
Width B(mm)
14

18

20

24

29

35
Clear
Material
- Carbon steel
  - EN 1.3505 Equiv.
- Stainless Steel
  - EN 1.4125 Equiv.
Clear
Allowable Rotational Speed(1/min)
1610

1800

2030

2320

2380

2660

3500

4550

4900

5000

5950

6500

7000

8500

9800

10000
Clear
Seals
- Not Provided
- Provided
Clear
Application
- General
- Heavy Load
- Low Dust Generation
Clear
Cam Follower Stud Thread (Fine)(mm)
- M12×1.5
- M16×1.5
- M18×1.5
- M20×1.5
- M24×1.5
- M30×1.5
Clear
Rolling Guide Method
- Full Roller
- With Retainer
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

Same day

5 Days or Less

7 Days or Less

8 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Variation of this product

Part Number
CFAH18-40
CFAH20-47
CFAH20-52
CFFH12-32
CFFH16-35
CFFH18-40

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	Characteristics/Applications	O.D. D (φ)	Width B (mm)	Material	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (1/min)	Seals	Application	Cam Follower Stud Thread (Fine) (mm)	Rolling Guide Method
23.93 €	1	Available	Same day Stock	10	Not Applicable	40	20	[Carbon steel] EN 1.3505 Equiv.	14.7	25.2	5950	Not Provided	General	M18×1.5	With Retainer
37.11 €	1	Available	8 Days	-	Not Applicable	47	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	7000	Not Provided	General	M20×1.5	With Retainer
31.61 €	1	Available	Same day Stock	10	Not Applicable	52	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	4900	Not Provided	General	M20×1.5	With Retainer
21.40 €	1	Available	Same day Stock	10	Not Applicable	32	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer
22.03 €	1	Available	Same day Stock	10	Not Applicable	35	18	[Carbon steel] EN 1.3505 Equiv.	12	18.3	7000	Provided	General	M16×1.5	With Retainer
28.08 €	1	Available	Same day Stock	10	Not Applicable	40	20	[Carbon steel] EN 1.3505 Equiv.	14.7	25.2	5950	Provided	General	M18×1.5	With Retainer