PEEK Plates
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
| Type | Grade | Color | Operating Ambient Temperature |
| PKA | Standard | Ash Brown | -50~250°C |
| PKAH | Sliding | Black | |
| PKCA | Electrical Conductivity | Black | Ambient Temp. ~ 250°C |
Specifications
■ Pre-drilled Type
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
| PKA2H PKCA2H | - - | 50 150 | - - | 25 120 | - - | 8 10 | - - | F34 F80 | - - | G10 G60 | - - | N4 M8 | - | L8 |
■ Pre-drilled Type
Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | T Dimension Range by Material | T | F | G | |||
| Type | T Dimension Tolerance | Number of Holes | |||||||
| PKA PKAH PKCA | (Standard) (Sliding) (Conductive Grade) | Circular Sawing | 1mm Increment | Selectable | 0.5mm Increment | ||||
| Not available | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~300 | 20~200 | PKA | 5, 8, 10 | 6~291.5 (2H, 4H) 4.5~295.5 (2HL) 6~145.5 (6H) | 4.5~195.5 (2H) 6~191.5 (2HL, 4H, 6H) | ||
| PKAH | |||||||||
| PKCA | 10 | ||||||||
| 20~250 | 20~150 | PKA | 16, 20, 25 | 6~241.5 (2H, 4H) 4.5~245.5 (2HL) 6~120.5 (6H) | 4.5~145.5 (2H) 6~141.5 (2HL, 4H, 6H) | ||||
| PKCA | 16, 20 | ||||||||
| Upper-lower Surface Milling etc. | 1mm Increment | 0.1mm Increment | 0.5mm Increment | ||||||
| 2FQ 0~+0.2 2FN ±0.1 2FM -0.2~0 | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~250 | 20~150 | PKA | 5~24 | 6~241.5 (2H, 4H) 4.5~245.5 (2HL) 6~120.5 (6H) | 4.5~145.5 (2H) 6~141.5 (2HL, 4H, 6H) | ||
| PKAH | 5~9 | ||||||||
| PKCA | 5~19 | ||||||||
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| T Dimension | Pre-drilled Hole Nominal Dia. | ||||||||||||
| Through Hole | Counterbore Hole | Threaded Insert | |||||||||||
| N | Z | M | L | ||||||||||
| 5~7 | 3 4 5 6 8 10 | - | 3 | 4 | (Threaded Insert Length) Select from Table 1 | ||||||||
| 8, 9 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 8 | |||||
| 10~15 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | 10 | ||||
| 16~25 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | |||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Grade | Color | Hole Processing | Finishing Method | T Dimension Tolerance | A (mm) | B (mm) | F | G | M | N | T (mm) | Z | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | N (±0.1) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 39 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | - | 5 ～ 39 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 4.5 ～ 395.5 | 3 ～ 10 | - | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 4.5 ～ 395.5 | - | 3 ～ 10 | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 4.5 ～ 395.5 | - | - | 10 ～ 30 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 4.5 ～ 495.5 | 6 ～ 391.5 | 3 ～ 10 | - | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 4.5 ～ 495.5 | 6 ～ 391.5 | - | 3 ～ 10 | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 2HL | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 4.5 ～ 495.5 | 6 ～ 391.5 | - | - | 10 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 6 ～ 391.5 | 3 ～ 10 | - | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 6 ～ 391.5 | - | 3 ～ 10 | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 4H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 491.5 | 6 ～ 391.5 | - | - | 10 ～ 30 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 245.5 | 6 ～ 391.5 | 3 ～ 10 | - | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 245.5 | 6 ～ 391.5 | - | 3 ～ 10 | 10 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Gray Brown | 6H | Circular Sawing | - | 20 ～ 500 | 20 ～ 400 | 6 ～ 245.5 | 6 ～ 391.5 | - | - | 10 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | 3 ～ 10 | - | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | 3 ～ 10 | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 4.5 ～ 145.5 | - | - | 5 ～ 9 | 3 ～ 6 | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 2HL | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 4.5 ～ 245.5 | 6 ～ 141.5 | - | - | 5 ～ 9 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Sliding | Black | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 4H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 241.5 | 6 ～ 141.5 | - | - | 5 ～ 9 | 3 ～ 6 | ||
- | 1 | 9 Days | 10 | Sliding | Black | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | 3 ～ 10 | - | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | 3 ～ 10 | 5 ～ 9 | - | ||
- | 1 | 9 Days | 10 | Sliding | Black | 6H | Upper-lower Surface Milled | M (0/-0.2) | 20 ～ 250 | 20 ～ 150 | 6 ～ 120.5 | 6 ～ 141.5 | - | - | 5 ～ 9 | 3 ～ 6 |
Loading...
Basic information
| Material | PEEK | Material Name | PEEK |
|---|
Configure
Basic Attributes
-
Grade
- Standard
- Conductive
- Sliding
-
Color
- Black
- Gray Brown
-
Hole Processing
-
Finishing Method
- Circular Sawing
- Upper-lower Surface Milled
-
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
A(mm)
-
B(mm)
-
F
-
G
-
M
-
N
-
T(mm)
-
Z
-
Type
- PKA2F□□H
- PKAH2F□□H
- PKAH□H
- PKA□H
- PKCA2F□□H
- PKCA□H
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.