Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Available dimensions and tolerances can be found under the tab More information.
Nut Type | Type | Screw Shaft | Nut | ||||
Material | Hardness | Surface Treatment | Material | Hardness | Surface Treatment | ||
Standard Nut | FBSSR | EN 1.1203 Equiv. | Induction Hardened 56 ~ 62HRC | Phosphate Conversion Coating | EN 1.7264 Equiv. | Carburized 58~62HRC | Low Temperature Black Chrome (Screw Shafts 8 and 10 are applied with Phosphate Conversion Coating) |
FBSSZ | - |
Further specifications can be found under the tab More information.
Part Number | - | L | - | F | - | P | - | S | - | V | - | U | - | C | - | KC | - | E | - | SC | - | X | - | Z | - | G | - | Q | - | K | - | N | - | J | - | JC | - | H | - | Y | - | W | - | R | |
FBSSRAA1004 FBSSZDJ2010 | - - | 450 1200 | - | F36 | - | P12 | - | S60 | - | V15 | - | U15 | - | G20 | - | Q15 | - | N10 |
- Material: steel
- Coatings: uncoated, LTBC coating, phosphate conversion coating
- Heat treatment: up to 62HRC
- Precision category: C3, C5, C7, C10
- Precision classes: precision class, standard class
- Slope: 1 to 32 mm
- Outer diameter: 6 to 32 mm
- Length (mm): 100 to 2000
- Nut shape: round flange, square flange, compact flange, block shape
Ball screws are intended for converting rotary motion to linear motion. This can also be done in reverse order from linear to rotary motion. With the ball screws, this is achieved extremely precisely due to their low play. In mechanical engineering, the ball thread drive is an indispensable feature and is indispensable in precision applications. These work in horizontal and vertical orientation, allowing to shift, raise and lower devices.
The ball screws are often driven by motors and shaft couplings, or manually via rotary/crank handles.
When utilising a keyway, it is recommended using a machine key, as these can be combined excellently due to the manufacturing tolerances.
For a smooth process, it is recommended installing the ball screw with a fixed bearing and a floating bearing. This ensures that the ball screw does not bend due to compression and generate vibrations. For this purpose, MISUMI offers the right support units drives in various designs. For more information on how to install ball screws, see the Installation Instructions available as a PDF.
Ball screw nuts are available in different shapes. These enable versatile utilisation, even in confined spaces. Due to their high precision, the ball screws can also provide a high level of repeatability that is necessary in precise positioning applications. These can be utilised, for example, for measuring devices or in 3D printing. It is recommended to use a pre-stressed ball screw for highly precise applications. Due to the pre-tensioning, the axial play is almost zero unlike a conventional ball screw. In addition, MISUMI offers single axis actuators (locating units) for such applications, which as drives are already equipped with precise ball screws.
In smaller applications, a slide screw or a so-called miniature screw drive can be used. Due to their design, these are very compact, but suitable for lower axial loads.
If very high forces occur, a lead screw could also be considered.
Which ball screw is the right one for your application must be calculated based on the existing factors and influences. You can use the selection Ball Screws that is available as a PDF for this purpose. You can also find the service life calculation in this link.
Application example for positioning stages
(1) Linear guide accessories, (2) Standard linear guide, (3) Table plate (meviy), (4) Ball screw, (5) Support units
Application example for the ball screw
(1)) Support units, (2) Ball screw nut stops, (3) Ball screw, (4) Ball screw nut mountings
Application example for a lifting device
(1) Ball screw, (2) Standard linear guide, (3) Support units, (4) Table top (meviy)
(1) Ball screw, (2) Standard linear guide, (3) Support units, (4) Table top (meviy)
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Screw Shaft O.D. (mm) | Lead (mm) | Axial Play | Number of Circuits (Rows x Windings) | Shaft Overall Length L (mm) | Basic Load Rating Dynamic Rating (N) | Basic Load Rating Static Rating (N) | Shaft End Shape on Support Side | Fixed Side Shaft End Shape | Shaft End Length F (mm) | Screw Shaft Surface Treatment | C (mm) | E (mm) | G (mm) | H (mm) | J (mm) | JC (mm) | K (mm) | KC (mm) | N (mm) | Q (mm) | R (mm) | S (mm) | SC (mm) | Shaft Dia. P (φ) | U (mm) | V (mm) | W (mm) | X (mm) | Y (mm) | Z (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | 10 | 10 | 0.05 or Less | 1 x 1.5 | 150 ~ 585 | 1850 | 3200 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 13 | Phosphate Coating | 2 ~ 11 | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | 0 ~ 11 | - | 6 | - | 5 ~ 32 | - | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 800 | 2600 | 5800 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 24 | Phosphate Coating | 2 ~ 22 | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | 0 ~ 22 | - | 6 ~ 8 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 10 | [0.10 or Less] 0.10 or Less | 1 x 1.5 | 150 ~ 800 | 2850 | 4950 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 24 | Phosphate Coating | 2 ~ 22 | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | 0 ~ 22 | - | 6 ~ 8 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 14 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 800 | 4400 | 7300 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 24 | Phosphate Coating | 2 ~ 22 | - | 5 ~ 30 | 4 ~ 9 | 3 ~ 20 | 0 ~ 30 | - | 0 ~ 22 | - | 6 ~ 10 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 30 | Phosphate Coating | 2 ~ 28 | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | 0 ~ 28 | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 10 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 30 | Phosphate Coating | 2 ~ 28 | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | 0 ~ 28 | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 20 | [0.10 or Less] 0.10 or Less | 2 x 1.5 | 200 ~ 1200 | 5800 | 13300 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 30 | Phosphate Coating | 2 ~ 28 | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | 0 ~ 28 | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 39 | Phosphate Coating | 2 ~ 37 | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | 0 ~ 37 | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 10 | [0.2 or Less] 0.15 or Less | 1 x 2.5 | 250 ~ 2000 | 10600 | 22700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 39 | Phosphate Coating | 2 ~ 37 | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | 0 ~ 37 | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 20 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 250 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 39 | Phosphate Coating | 2 ~ 37 | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | 0 ~ 37 | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6600 | 18700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 54 | Phosphate Coating | 2 ~ 52 | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | 0 ~ 52 | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 27500 | 76300 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 54 | Phosphate Coating | 2 ~ 52 | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | 0 ~ 52 | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 25 | [0.2 or Less] 0.12 or Less | 1 x 2.5 | 300 ~ 2000 | 9300 | 22700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 54 | Phosphate Coating | 2 ~ 52 | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | 0 ~ 52 | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 28 | 6 | [0.10 or Less] 0.10 or Less | 2 x 2.5 | 200 ~ 2000 | 12100 | 42300 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 54 | Phosphate Coating | 2 ~ 52 | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | 0 ~ 52 | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 32800 | 86700 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 69 | Phosphate Coating | 2 ~ 67 | - | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | 0 ~ 67 | - | 10 ~ 25 | - | 5 ~ 100 | - | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 32 | [0.2 or Less] 0.15 or Less | 2 x 1.5 | 300 ~ 2000 | 14600 | 38900 | F (Single Stepped, Wrench Flats machining) | K (Double Stepped, Keyway machining) | 5 ~ 69 | Phosphate Coating | 2 ~ 67 | - | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | 0 ~ 67 | - | 10 ~ 25 | - | 5 ~ 100 | - | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 800 | 2600 | 5800 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 24 | Phosphate Coating | - | 4 ~ 6 | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 10 | [0.10 or Less] 0.10 or Less | 1 x 1.5 | 150 ~ 800 | 2850 | 4950 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 24 | Phosphate Coating | - | 4 ~ 6 | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 14 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 800 | 4400 | 7300 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 24 | Phosphate Coating | - | 4 | 5 ~ 30 | 4 ~ 9 | 3 ~ 20 | 0 ~ 30 | - | - | - | 6 ~ 10 | - | 5 ~ 40 | - | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 30 | Phosphate Coating | - | 4 ~ 8 | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 10 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 30 | Phosphate Coating | - | 4 ~ 8 | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 20 | [0.10 or Less] 0.10 or Less | 2 x 1.5 | 200 ~ 1200 | 5800 | 13300 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 30 | Phosphate Coating | - | 4 ~ 8 | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | - | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 39 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 10 | [0.2 or Less] 0.15 or Less | 1 x 2.5 | 250 ~ 2000 | 10600 | 22700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 39 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 20 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 250 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 39 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | - | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6600 | 18700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 54 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 27500 | 76300 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 54 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 25 | [0.2 or Less] 0.12 or Less | 1 x 2.5 | 300 ~ 2000 | 9300 | 22700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 54 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 28 | 6 | [0.10 or Less] 0.10 or Less | 2 x 2.5 | 200 ~ 2000 | 12100 | 42300 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 54 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | - | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 32800 | 86700 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 69 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | - | - | 10 ~ 25 | - | 5 ~ 100 | - | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 32 | [0.2 or Less] 0.15 or Less | 2 x 1.5 | 300 ~ 2000 | 14600 | 38900 | F (Single Stepped, Wrench Flats machining) | m (Double Stepped, Tapped Hole on the End) | 5 ~ 69 | Phosphate Coating | - | 4 ~ 10 | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | - | - | 10 ~ 25 | - | 5 ~ 100 | - | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 8 | 2 | 0.05 or Less | 1 x 3.5 | 100 ~ 400 | 1800 | 3200 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 12 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 24 | 5 ~ 11 | 4 | 6 ~ 12 | 6 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 8 | 4 | 0.05 or Less | 1 x 2.5 | 100 ~ 380 | 1900 | 3100 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 12 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 24 | 5 ~ 11 | 4 | 6 ~ 12 | 6 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 2 | 0.05 or Less | 1 x 2.5 | 150 ~ 585 | 1700 | 3000 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 13 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 600 | 2300 | 4800 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 13 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 10 | 0.05 or Less | 1 x 1.5 | 150 ~ 585 | 1850 | 3200 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 13 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 800 | 2600 | 5800 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 10 | [0.10 or Less] 0.10 or Less | 1 x 1.5 | 150 ~ 800 | 2850 | 4950 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 14 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 800 | 4400 | 7300 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 30 | 4 ~ 9 | 3 ~ 20 | 0 ~ 30 | - | - | - | 6 ~ 10 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 30 | Phosphate Coating | - | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | 5 ~ 29 | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 10 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 30 | Phosphate Coating | - | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | 5 ~ 29 | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 20 | [0.10 or Less] 0.10 or Less | 2 x 1.5 | 200 ~ 1200 | 5800 | 13300 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 30 | Phosphate Coating | - | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | 5 ~ 29 | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 39 | Phosphate Coating | - | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | 5 ~ 38 | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 10 | [0.2 or Less] 0.15 or Less | 1 x 2.5 | 250 ~ 2000 | 10600 | 22700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 39 | Phosphate Coating | - | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | 5 ~ 38 | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 20 | 20 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 250 ~ 2000 | 6200 | 14700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 39 | Phosphate Coating | - | - | 5 ~ 45 | 6 ~ 14 | 3 ~ 20 | 0 ~ 45 | - | - | - | 8 ~ 15 | - | 5 ~ 60 | 5 ~ 38 | 4 ~ 13 | 10 ~ 30 | 10 ~ 15 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 200 ~ 2000 | 6600 | 18700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 54 | Phosphate Coating | - | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | 5 ~ 53 | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 27500 | 76300 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 54 | Phosphate Coating | - | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | 5 ~ 53 | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 25 | 25 | [0.2 or Less] 0.12 or Less | 1 x 2.5 | 300 ~ 2000 | 9300 | 22700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 54 | Phosphate Coating | - | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | 5 ~ 53 | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 28 | 6 | [0.10 or Less] 0.10 or Less | 2 x 2.5 | 200 ~ 2000 | 12100 | 42300 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 54 | Phosphate Coating | - | - | 5 ~ 60 | 8 ~ 18 | 3 ~ 20 | 0 ~ 60 | - | - | - | 10 ~ 20 | - | 5 ~ 80 | 5 ~ 53 | 4 ~ 18 | 15 ~ 40 | 15 ~ 20 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 10 | [0.2 or Less] 0.20 or Less | 2 x 2.5 | 300 ~ 2000 | 32800 | 86700 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 69 | Phosphate Coating | - | - | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | - | - | 10 ~ 25 | - | 5 ~ 100 | 5 ~ 68 | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 32 | 32 | [0.2 or Less] 0.15 or Less | 2 x 1.5 | 300 ~ 2000 | 14600 | 38900 | F (Single Stepped, Wrench Flats machining) | N (Double Stepped, 1 Set Screw Flat) | 5 ~ 69 | Phosphate Coating | - | - | 5 ~ 75 | 8 ~ 23 | 3 ~ 20 | 0 ~ 75 | - | - | - | 10 ~ 25 | - | 5 ~ 100 | 5 ~ 68 | 4 ~ 23 | 20 ~ 50 | 20 ~ 25 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 8 | 2 | 0.05 or Less | 1 x 3.5 | 100 ~ 400 | 1800 | 3200 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 12 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 24 | 5 ~ 11 | 4 | 6 ~ 12 | 6 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 8 | 4 | 0.05 or Less | 1 x 2.5 | 100 ~ 380 | 1900 | 3100 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 12 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 24 | 5 ~ 11 | 4 | 6 ~ 12 | 6 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 2 | 0.05 or Less | 1 x 2.5 | 150 ~ 585 | 1700 | 3000 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 13 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 600 | 2300 | 4800 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 18 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 10 | 10 | 0.05 or Less | 1 x 1.5 | 150 ~ 585 | 1850 | 3200 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 13 | Phosphate Coating | - | - | 5 ~ 18 | 4 ~ 5 | 3 ~ 18 | 0 ~ 18 | - | - | - | 6 | - | 5 ~ 32 | 5 ~ 12 | 4 ~ 6 | 8 ~ 16 | 8 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 4 | 0.05 or Less | 1 x 2.5 | 150 ~ 800 | 2600 | 5800 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 12 | 10 | [0.10 or Less] 0.10 or Less | 1 x 1.5 | 150 ~ 800 | 2850 | 4950 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 24 | 4 ~ 7 | 3 ~ 20 | 0 ~ 24 | - | - | - | 6 ~ 8 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 14 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 800 | 4400 | 7300 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 24 | Phosphate Coating | - | - | 5 ~ 30 | 4 ~ 9 | 3 ~ 20 | 0 ~ 30 | - | - | - | 6 ~ 10 | - | 5 ~ 40 | 5 ~ 23 | 4 ~ 8 | 8 ~ 20 | 8 ~ 10 | - | - | - | - | ||
- | 1 | 9 Days | 10 | 15 | 5 | [0.10 or Less] 0.10 or Less | 1 x 2.5 | 150 ~ 1200 | 5100 | 10500 | F (Single Stepped, Wrench Flats machining) | P (Double Stepped, 2 Set Screw Flats) | 5 ~ 30 | Phosphate Coating | - | - | 5 ~ 36 | 6 ~ 11 | 3 ~ 20 | 0 ~ 36 | - | - | - | 8 ~ 12 | - | 5 ~ 48 | 5 ~ 29 | 4 ~ 10 | 10 ~ 24 | 10 ~ 12 | - | - | - | - |
Loading...
V | Tolerance |
6 | -0.002 -0.007 |
8 | -0.002 -0.008 |
10 | -0.002 -0.015 |
12, 15 | -0.003 -0.018 |
20, 25 | -0.004 -0.021 |
Accuracy Grade | Part Number | 1mm Increment | 1mm Increment | Selection | 1mm Increment | Selection | ||||||||||||||||||||||||||||||
Type | Left End Support Side | Right End Fixed Side | Screw Shaft O.D. | Lead | L | F | P | S | U | C | KC | SC | X | Z | V | E (Coarse) | G | K | J | JC | H | Y | R | W | Q | N (Coarse) | ||||||||||
C10 | FBSSR FBSSZ | A B C D E F G H | A J K M N P R S | 08 | 02 | 100~400 | 5≤F≤Px3 9≤S≤Vx4 V≤U≤Vx2 U≤S-Pitch x3 b1<C≤60 F-C-KC≥2 KC=0 or KC≥2 5≤SC≤Px3 SC≤F-2 5≤X≤20 P≥4 P≥V/2 When V=6, P=4 When V≥8, P≤V-2 | 6 | 4 5 6 8 10 | 5≤G≤Qx3 5≤K≤Qx3 3≤J≤20 H≥Q-2 5≤Y≤20 R≤Q-2 | 6 | - | ||||||||||||||||||||||||
08 | 04 | 100~380 | 6 | |||||||||||||||||||||||||||||||||
10 | 02 | 150~585 | 8 | 6 | - | |||||||||||||||||||||||||||||||
10 | 04 | 150~600 | 6 | |||||||||||||||||||||||||||||||||
10 | 10 | 150~585 | 6 | |||||||||||||||||||||||||||||||||
12 | 04 | 150~800 | 8 | 10 | 6 | 8 | 4 | |||||||||||||||||||||||||||||
12 | 10 | 150~800 | 8 | 10 | ||||||||||||||||||||||||||||||||
14 | 05 | 150~800 | 8 | 10 | 6 | 8 | 10 | 4 | 5 | 6 | ||||||||||||||||||||||||||
15 | 05 | 150~1200 | 10 | 12 | 8 | 10 | 12 | 5 | 6 | 8 | ||||||||||||||||||||||||||
15 | 10 | 200~1200 | ||||||||||||||||||||||||||||||||||
15 | 20 | |||||||||||||||||||||||||||||||||||
20 | 05 | 200~2000 | 10 | 12 | 15 | 8 | 10 | 12 | 15 | 5 | 6 | 8 | 10 | |||||||||||||||||||||||
20 | 10 | 250~2000 | ||||||||||||||||||||||||||||||||||
20 | 20 | |||||||||||||||||||||||||||||||||||
25 | 05 | 200~2000 | 15 | 20 | 10 | 12 | 15 | 20 | 6 | 8 | 10 | |||||||||||||||||||||||||
25 | 10 | 300~2000 | ||||||||||||||||||||||||||||||||||
25 | 25 | |||||||||||||||||||||||||||||||||||
28 | 06 | 200~2000 | 15 | 20 | 10 | 12 | 15 | 20 | 6 | 8 | 10 | |||||||||||||||||||||||||
32 | 10 | 300~2000 | 20 | 25 | 10 | 12 | 15 | 20 | 25 | 6 | 8 | 10 | ||||||||||||||||||||||||
32 | 32 | |||||||||||||||||||||||||||||||||||
For FBSSZ type, sizes 0804, 1002 and 1010 are not available. E≤P-4 N≤Q-4 |
Type | Rolled | Nut Type | Standard Nuts | Accuracy Grade | C10 |
---|---|---|---|---|---|
Preload | Not Preloaded | Conditions of Use | Standard | Twisting Direction | Right |
Nut structure | 1-fach | Circuit System | Tube Type | Grease Type | Standard |
Nut Size | Standard |
Configure
Basic Attributes
Screw Shaft O.D.(mm)
Lead(mm)
Axial Play
Number of Circuits(Rows x Windings)
Shaft Overall Length L(mm)
Shaft End Shape on Support Side
Fixed Side Shaft End Shape
Shaft End Length F(mm)
Screw Shaft Surface Treatment
C(mm)
E(mm)
G(mm)
H(mm)
J(mm)
JC(mm)
K(mm)
KC(mm)
N(mm)
Q(mm)
R(mm)
S(mm)
SC(mm)
Shaft Dia. P(φ)
U(mm)
V(mm)
W(mm)
X(mm)
Y(mm)
Z(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
How do you mount a ball screw drive?
A ball screw should be stored with a fixed bearing and a floating bearing. The fixed bearing should ideally be installed on the engine side or the drive side. Fixed bearing housings come already equipped with angular contact ball bearings to absorb axial forces. This combination makes ball screws an ideal candidate for positioning. However, a preloaded threaded drive should be selected for very high precision as it has very little axial play.
Why should a fixed and floating bearing be used?
A fixed bearing housing is often used on the drive side. The floating bearing with housing, on the other hand, allows a small axial deviation and thus compensates for a change in length or a length tolerance. This prevents compression and bending of the ball screw and an imbalance through the length compensation. This may already occur by heating the spindle or application. Fixed and floating bearings are recommended in many rotary applications.
How does a ball screw work?
A ball screw works similarly to a profile rail guide . In the nut of the ball screw, balls are in a closed ball circulation, which are guided to the spindle by the circular alignment. Thus, an unlimited stroke is theoretically possible, which, however, is limited by the length of the spindle. It is important to ensure that the nut of the ball screw is not removed from the spindle, because the balls can fall out as a result.
Why does the spindle oscillate in a ball screw drive?
One possible cause for this could be that the ball screw is exposed to excessively high rotational speeds. The permissible rotational speed should not be higher than 80% of the critical speed. Here, attention should be paid not only to the visibly rotating components, but also to the rotational speed of the balls. Further information can be found in the ball screw driver selection as a PDF. Another possibility for the spindle to oscillate could be a compression of the spindle. Therefore, it is important to install a ball screw with a fixed bearing and a floating bearing so that these stresses can be compensated through a floating bearing. MISUMI offers this as ready-to-install bearing housings.
Is the ball screw nut removable?
The ball screw nut or ball wrap nut should not be removed from the lead screw. There is a risk that the balls will fall out of the nut. This also means that the nut should not be extended over the threaded surface of the spindle. To remove the nut, you can work carefully with a transition shaft with the appropriate core diameter. However, MISUMI also offers an option [TAS] that provides a transition shaft with the ball screw drive. If a ball screw with reverse ball screw is required, the option [RLC] can be supplied with the ball screw nut installed in reverse.
Can you replace just the ball screw nut?
A ball screw drive should always be replaced as one unit. If damage or wear has already occurred on the spindle, the accuracy of the ball screw drive can no longer be guaranteed. Therefore, it is always recommended replacing spindle and nut together. In addition, the ball screw nut should generally not be removed from the spindle. As a result, the balls that are necessary for the transmission of force may fall out.
How long does a ball screw lasts?
How long a ball screw can withstand an application depends on many factors. Therefore, it is not possible to say generally how long a ball screw will last. When a ball screw should be replaced, it must be determined mathematically. In the following link, you will find the appropriate calculation formula for the lifetime available as a PDF.
How large is the axial play of a ball screw?
The axial play varies depending on the precision class and size of the ball screw. You can find the appropriate axial play for different ball screws under the selection Ball Screws available as a PDF .
What must be considered when installing a ball screw?
When installing a ball screw spindle, more must be taken into account than just ensuring that it is installed tension-free. There are a few things you should observe even before installation. You can view these as a PDF under Precautions.
Are the ball screws lubricated?
The ball screws from MISUMI are pre-greased. Various lubricants are available for this purpose. Lithium-saponified lubricants are used as standard lubricants. In addition, MISUMI offers heat-resistant lubricants or lubricants suitable for cleanrooms. You can find further information under Installation and Maintenance available as a PDF.