Locating pins, Centring pins / head shape selectable / tip shape selectable / internal thread

Volume Discount

MISUMI

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Locating Pins / Positioning Pins / Centring Pins

Technical Drawing - Locating Pins / Positioning Pins / Centring Pins

Selectable Pilot Shape/Straight Tapped:Related Image

Available dimensions and tolerances can be found under the tab More Information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Locating Pins / Positioning Pins / Centring Pins

Material No.	Material	Surface Treatment	Hardness	Round	Diamond	Straight
	EN 1.2510 Equiv.	-	Treated Hardness: 55 ~ 60HRC	LPGJ	LPDGJ	LPCJ
	EN 1.2510 Equiv.	Hard Chrome Plating	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	LPGG	LPDGG	LPCG
	EN 1.1191 Equiv.	-	Treated Hardness: 45 ~ 50HRC	LPG	LPDG	LPC
	EN 1.1191 Equiv.	Black Oxide	Treated Hardness: 45 ~ 50HRC	LPGB	LPDGB	LPCB
	EN 1.1191 Equiv.	Hard Chrome Plating	Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~	LPGR	LPDGR	LPCR
	EN 1.4301 Equiv.	-	-	LPGS	LPDGS	LPCS
	EN 1.4301 Equiv.	Hard Chrome Plating	Plating Hardness: 750HV ~	LPGD	-	LPCD
	EN 1.4037 Equiv.	-	Treated Hardness: 50 ~ 55HRC	LPGC	LPDGC	LPCC

Further specifications can be found under the tab More Information.

Composition of a Product Code - Locating Pins / Positioning Pins / Centring Pins

Part Number	-	P	-	B	-	R	-	G	-	L
LPGA6 LPGB10 LPCA6	- - -	P10.0 P16.0 P10.0	- - -	B25.0 B50.0 B25.0	- -	R6 R6	-	G13	- -	L6 L16

Alterations - Locating Pins / Positioning Pins / Centring Pins

General Information - Locating Pins / Positioning Pins / Centring Pins

Selection details of receiving pins/locating pins/ centering pins

- Material: steel, stainless steel, aluminum, plastic
- Coatings: burnished, nickel-plated, hard chrome-plated, polished, hard chrome-plated and polished, clear anodized
- Heat treatment: carburized, quenched
- ISO tolerances mounting side: m6, n6, p6, g6, h6, h7
- Head diameter: 1 to 30 mm
- Basic form: wide head, narrow head, cylindrical, with collar, with hole, with flange, double guide
- Assembly side form: fit, external thread, internal thread, circumferential groove, notch, flat surface
- Head shape: round, diamond-shaped (sword shape), triangular
- Tip shape: fastened, rounded, conical, round, spherical, flattened, ball attachment, projectile-shaped

Description/Basics

centering pins are used to fix the position and limit the degrees of freedom of the objects to be positioned. The precisely manufactured centering pins enable highly precise positioning of the assembly parts. centering pins can position objects as side stopper or center them by insertion. This allows positioning them in the X, Y and Z axes.

Application example: centering pin as work piece stopper - (1) work piece, (2) threaded receiving pin

A straight centering pin is only sufficient for the X and Y axis to determine the position of an assembly part. In order to additionally adjust the position in the Z axis, a centering pin with a collar can be used. This combination can reduce the variety of components, since there is no need for an additional support pin.

Application example for a centering pin with collar

In most cases a plug-in connection uses a centering pin to protect the work piece or the application during multiple joining and positioning. The centering bushings protect the component from unwanted wear, especially if the objects to be placed are made of a soft material. Therefore, positioning bushings make an application more maintenance-friendly. Wear should always be considered when planning an application. The material and the surface coating of centering pins should be selected according to the application.

Positioning bushing - receiving bushing – centering bushing

Application example for a centering bushing - (1) centering bushing

Function

If objects cannot be placed straight, but slightly inclined on centering pins, a round or chamfered head shape can be used. This helps ensure that the objects do not jam with the centering pins and the process runs smoothly. A round or chamfered head shape is also advisable for applications that are highly repetitive (cycles).

Receiving pin with collar - threaded receiving pin - receiving pin with collar - receiving pin with thread

Application example for an inclined infeed - (1) centering pin rounded head, (2) workpiece

For the highest possible positioning accuracy centering pins should be used in pairs as much as possible. The respective distance between the centering pins also influences the position accuracy. If it is chosen large, it can improve the accuracy of the object’s positioning. If there is a large distance between the centering pins (B), one of the locating pins should have a diamond-shaped head (sword pin), since a sword pin almost prevents tilting. The use of a third centering pin in an L-shaped (triangular) arrangement may improve the positioning accuracy even further. In order to ensure that the centering pins are not interchanged, centering pins with different diameters should be selected.

Application example for a sword pin - (1) sword pin (diamond-shaped), (2) centering pin (round)

MISUMI offers various mounting variants for centering pins in order to keep applications maintenance-friendly. Centering pins with internal threads can be interchangeably fastened with a screw through the mounting plate from underneath. If access to the underside is difficult, a centering pin or sword pin with external thread can be used. The assembly and disassembly of the centering pins can thus be easily designed by means of the various mounting versions.

Threaded locating pin - external threaded locating pin - internal threaded locating pin

Centering pin with external thread/ centering pin with internal thread

Areas of Application

centering pins are used in work piece carriers as well as the highly accurate positioning of components in test benches. centering pins enable highly precise positioning of objects with all degrees of freedom, thanks to the versatile and highly configurable shapes. The wide variety of MISUMI centering pins offers a suitable shape for every application. Centering pins are used for thin sheets as well as for heavy and complex components. This means that centering pins can be used across almost all industries of plant engineering and mechanical engineering. In many applications, centering pins are indispensable, as they enable a highly accurate positioning of the components.

Materials

The MISUMI centering pins are available in the following materials: steel, stainless steel, aluminum, plastic . Pins made of steel and aluminum are available in both hardened and coated versions. With a high number of cycles, the use of a hardened material is recommended, as these have a higher wear resistance.

Corrosion resistance

The following salt water spray test was performed on the raw material (see table) of the centering pins and mounting pins. Corrosion resistance was determined based on the test times of 48 and 96 hours.

	EN 1.4305 equivalent	EN 1.4301 equivalent	EN 1.4125 equivalent	EN 1.2510 equivalent
Before the test
48h
96h

centering pin salt water spray test (according to JIS Z2371)

Shear load in comparison

During a test procedure, the shear load of a centering pin was tested with different steels. The tested centering pin was based on JPBB8-10 and was tested for a shear load in a device (see figure). The following table lists the test results for comparison purposes.

Receiving pin – centering pin – centering bolt

Application example for the shear load of receiving bolts

Materials	Shear load	Hardness
EN 1.2510 equivalent	65 kN	60 ~ 63 HRC
EN 1.4301 equivalent	27 kN	10 ~ 20 HRC
EN 1.4125 equivalent	56 kN	50 ~ 55 HRC

Comparison table for shear loads on receiving pins, reference values

Coatings

MISUMI locating pins are available in burnished, hard chrome-plated or anodized to protect them from corrosion. Locating pins that have to withstand many cycles can be hard chrome-plated. The hard chrome plating provides a high surface hardness and provides the locating pin with high wear resistance. The selectable polished surface also ensures good surface roughness of the cylinder pins and helps to achieve good sliding properties. Aluminum locating pins are translucent anodized to protect them from corrosion and wear.

Dimensions

Locating pin with wide head

two-stage locating pin - stepped locating pin - double locating pin

Locating pin, two-stage

Locating pin with narrow head

Locating pin with collar

Cylindrical locating pin

Locating pin with fastening hole

Flanged locating pin

Locating pin - locating pin with flange - locating pin with cone

Conical flanged locating pin

Instructions for Use / Installation Information - Locating Pins / Positioning Pins / Centring Pins

Maintenance

To facilitate maintenance for the centering pins, V-shaped wear grooves can be applied to the centering pin. The 0.2 mm deep grooves serve as a wear indicator of the usable surface. This makes the visual wear on the centering pin comprehensible and makes it easier to maintain the accuracy of the device. The wear grooves of the centering pins are only available with hardened and round centering pins.

centering pin – centering pin - sword pin - sword pins – centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

Example of a centering pin with wear groove (red)

Application Examples - Locating Pins / Positioning Pins / Centring Pins

Locating bolt - locating pin - locating bushing with collar

centering pin/ centering bushing with collar - (1) centering pin, (2) centering bushing

Locating bolt - locating pin - locating bushing

centering pin/ centering bushing - (1) centering pin, (2) centering bushing, (3) mounting plate

Locating bolt - locating pin – centering pin

Workpiece carrier with centering pin - (1) circuit board/printed circuit board, (2) centering pin

Locating bolt - locating pin – centering pin - mounting pin

Workpiece carrier with centering pin and positioning pin - (1) centering pin, (2) positioning pin

Positioning pin with cone - locating bolt with cone - locating pin with cone – centering bolt two-stage locating pin two-stage - locating bolt two-stage

Two-stage centering pin with cone - (1) centering pin, (2) workpieces

Two-stage centering pin with cone and internal thread - (1) centering pin, (2) workpiece

Supplementary Article

Positioning pin/spacer bolt

Locating pin - DIN 6321 - DIN6321 - support pins - receiving pins

Centering pins for fixtures

centering pin - locating pin - locating bolt - receiving pin - receiving bolt

Centering bushings/test bushings

Clamping technology

Push-Down Clamp

Spannvorrichtung - Haltevorrichtung - Federspanner

Industrial Applications

3D printer industry

Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde

Automotive industry

Pharmaindustrie

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
Next >>

Part Number
LPDGA6-P[6.5-12/0.01]-B[2-12/0.1]-R[4-500/1]-L[6-12/1]
LPDGA6T-P[6.5-12/0.01]-B[2-12/0.1]-R[4-500/1]-L[6-12/1]
LPDGA8-P[9-15/0.01]-B[2-15/0.1]-R[5-500/1]-L[8-16/1]
LPDGA10-P[11-20/0.01]-B[3-20/0.1]-R[6-500/1]-L[12-20/1]
LPDGA10T-P[11-20/0.01]-B[3-20/0.1]-R[6-500/1]-L[12-16/1]
LPDGA12-P[13-20/0.01]-B[3-20/0.1]-R[7-500/1]-L[12-24/1]
LPDGA12T-P[13-20/0.01]-B[3-20/0.1]-R[7-500/1]-L[12-18/1]
LPDGA16-P[17-25/0.01]-B[5-20/0.1]-R[9-500/1]-L[16-32/1]
LPDGA16T-P[17-25/0.01]-B[5-20/0.1]-R[9-500/1]-L[14-24/1]
LPDGA20-P[21-35/0.01]-B[5-20/0.1]-R[11-500/1]-L[20-40/1]
LPDGA20T-P[21-35/0.01]-B[5-20/0.1]-R[11-500/1]-L[18-30/1]
LPDGB6-P[6.5-12/0.01]-B[2-12/0.1]-G[1-12/1]-L[6-12/1]
LPDGB6T-P[6.5-12/0.01]-B[2-12/0.1]-G[1-12/1]-L[6-12/1]
LPDGB8-P[9-15/0.01]-B[2-15/0.1]-G[1-15/1]-L[8-16/1]
LPDGB10-P[11-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[10-20/1]
LPDGB10T-P[11-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-16/1]
LPDGB12-P[13-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-24/1]
LPDGB12T-P[13-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-18/1]
LPDGB16-P[17-25/0.01]-B[5-20/0.1]-G[1-25/1]-L[16-32/1]
LPDGB16T-P[17-25/0.01]-B[5-20/0.1]-G[1-25/1]-L[14-24/1]
LPDGB20-P[21-35/0.01]-B[5-20/0.1]-G[1-35/1]-L[20-40/1]
LPDGB20T-P[21-35/0.01]-B[5-20/0.1]-G[1-35/1]-L[18-30/1]
LPDGBA6-P[6.5-12/0.01]-B[2-12/0.1]-R[4-500/1]-L[6-12/1]
LPDGBA6T-P[6.5-12/0.01]-B[2-12/0.1]-R[4-500/1]-L[6-12/1]
LPDGBA8-P[9-15/0.01]-B[2-15/0.1]-R[5-500/1]-L[8-16/1]
LPDGBA10-P[11-20/0.01]-B[3-20/0.1]-R[6-500/1]-L[10-20/1]
LPDGBA10T-P[11-20/0.01]-B[3-20/0.1]-R[6-500/1]-L[12-16/1]
LPDGBA12-P[13-20/0.01]-B[3-20/0.1]-R[7-500/1]-L[12-24/1]
LPDGBA12T-P[13-20/0.01]-B[3-20/0.1]-R[7-500/1]-L[12-18/1]
LPDGBA16-P[17-25/0.01]-B[5-20/0.1]-R[9-500/1]-L[16-32/1]
LPDGBA16T-P[17-25/0.01]-B[5-20/0.1]-R[9-500/1]-L[14-24/1]
LPDGBA20-P[21-35/0.01]-B[5-20/0.1]-R[11-500/1]-L[20-40/1]
LPDGBA20T-P[21-35/0.01]-B[5-20/0.1]-R[11-500/1]-L[18-30/1]
LPDGBB6-P[6.5-12/0.01]-B[2-12/0.1]-G[1-12/1]-L[6-12/1]
LPDGBB6T-P[6.5-12/0.01]-B[2-12/0.1]-G[1-12/1]-L[6-12/1]
LPDGBB8-P[9-15/0.01]-B[2-15/0.1]-G[1-15/1]-L[8-16/1]
LPDGBB10-P[11-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[10-20/1]
LPDGBB10T-P[11-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-16/1]
LPDGBB12-P[13-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-24/1]
LPDGBB12T-P[13-20/0.01]-B[3-20/0.1]-G[1-20/1]-L[12-18/1]
LPDGBB16-P[17-25/0.01]-B[5-20/0.1]-G[1-25/1]-L[16-32/1]
LPDGBB16T-P[17-25/0.01]-B[5-20/0.1]-G[1-25/1]-L[14-24/1]
LPDGBB20-P[21-35/0.01]-B[5-20/0.1]-G[1-35/1]-L[20-40/1]
LPDGBB20T-P[21-35/0.01]-B[5-20/0.1]-G[1-35/1]-L[18-30/1]
LPDGBC6-P[6.5-12/0.01]-B[2-12/0.1]-R[1-6/1]-L[6-12/1]
LPDGBC6T-P[6.5-12/0.01]-B[2-12/0.1]-R[1-6/1]-L[6-12/1]
LPDGBC8-P[9-15/0.01]-B[2-15/0.1]-R[1-7/1]-L[8-16/1]
LPDGBC10-P[11-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[10-20/1]
LPDGBC10T-P[11-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[12-16/1]
LPDGBC12-P[13-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[12-24/1]
LPDGBC12T-P[13-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[12-18/1]
LPDGBC16-P[17-25/0.01]-B[5-20/0.1]-R[1-12/1]-L[16-32/1]
LPDGBC16T-P[17-25/0.01]-B[5-20/0.1]-R[1-12/1]-L[14-24/1]
LPDGBC20-P[21-35/0.01]-B[5-20/0.1]-R[1-17/1]-L[20-40/1]
LPDGBC20T-P[21-35/0.01]-B[5-20/0.1]-R[1-17/1]-L[18-30/1]
LPDGC6-P[6.5-12/0.01]-B[2-12/0.1]-R[1-6/1]-L[6-12/1]
LPDGC6T-P[6.5-12/0.01]-B[2-12/0.1]-R[1-6/1]-L[6-12/1]
LPDGC8-P[9-15/0.01]-B[2-15/0.1]-R[1-7/1]-L[8-16/1]
LPDGC10-P[11-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[10-20/1]
LPDGC10T-P[11-20/0.01]-B[3-20/0.1]-R[1-10/1]-L[12-16/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Type (Basic Shape)	Shape (Head, Outline View)	Shape (Head, Tip View)	Material	Surface Treatment	Heat Treatment	[D] Diameter (Mounting Side) (mm)	ISO Tolerance (Mounting Side)	[P] Diameter (Head) (mm)	[M] Diameter (Screw) (mm)	[L] Length (Pin) (mm)	G (mm)	Length of Locating Side B (mm)	R (mm)
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	-	2 ～ 12	4 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	-	2 ～ 12	4 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	8	g6	9 ～ 15	-	8 ～ 16	-	2 ～ 15	5 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10	g6	11 ～ 20	5	12 ～ 20	-	3 ～ 20	6 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	-	3 ～ 20	6 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	12	g6	13 ～ 20	5	12 ～ 24	-	3 ～ 20	7 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	12T	g6	13 ～ 20	4	12 ～ 18	-	3 ～ 20	7 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	16	g6	17 ～ 25	8	16 ～ 32	-	5 ～ 20	9 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	16T	g6	17 ～ 25	6	14 ～ 24	-	5 ～ 20	9 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	20	g6	21 ～ 35	8	20 ～ 40	-	5 ～ 20	11 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	20T	g6	21 ～ 35	6	18 ～ 30	-	5 ～ 20	11 ～ 500
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	1 ～ 12	2 ～ 12	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	1 ～ 12	2 ～ 12	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	8	g6	9 ～ 15	-	8 ～ 16	1 ～ 15	2 ～ 15	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10	g6	11 ～ 20	5	10 ～ 20	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	12	g6	13 ～ 20	5	12 ～ 24	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	12T	g6	13 ～ 20	4	12 ～ 18	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	16	g6	17 ～ 25	8	16 ～ 32	1 ～ 25	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	16T	g6	17 ～ 25	6	14 ～ 24	1 ～ 25	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	20	g6	21 ～ 35	8	20 ～ 40	1 ～ 35	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	20T	g6	21 ～ 35	6	18 ～ 30	1 ～ 35	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	-	2 ～ 12	4 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	-	2 ～ 12	4 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	8	g6	9 ～ 15	4	8 ～ 16	-	2 ～ 15	5 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10	g6	11 ～ 20	5	10 ～ 20	-	3 ～ 20	6 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	-	3 ～ 20	6 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12	g6	13 ～ 20	5	12 ～ 24	-	3 ～ 20	7 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12T	g6	13 ～ 20	4	12 ～ 18	-	3 ～ 20	7 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16	g6	17 ～ 25	8	16 ～ 32	-	5 ～ 20	9 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16T	g6	17 ～ 25	6	14 ～ 24	-	5 ～ 20	9 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20	g6	21 ～ 35	8	20 ～ 40	-	5 ～ 20	11 ～ 500
-	1	10 Days	10	Large Head	Diamond	Rounded R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20T	g6	21 ～ 35	6	18 ～ 30	-	5 ～ 20	11 ～ 500
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	1 ～ 12	2 ～ 12	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	1 ～ 12	2 ～ 12	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	8	g6	9 ～ 15	4	8 ～ 16	1 ～ 15	2 ～ 15	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10	g6	11 ～ 20	5	10 ～ 20	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12	g6	13 ～ 20	5	12 ～ 24	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12T	g6	13 ～ 20	4	12 ～ 18	1 ～ 20	3 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16	g6	17 ～ 25	8	16 ～ 32	1 ～ 25	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16T	g6	17 ～ 25	6	14 ～ 24	1 ～ 25	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20	g6	21 ～ 35	8	20 ～ 40	1 ～ 35	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Tapered	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20T	g6	21 ～ 35	6	18 ～ 30	1 ～ 35	5 ～ 20	-
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	-	2 ～ 12	1 ～ 6
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	-	2 ～ 12	1 ～ 6
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	8	g6	9 ～ 15	4	8 ～ 16	-	2 ～ 15	1 ～ 7
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10	g6	11 ～ 20	5	10 ～ 20	-	3 ～ 20	1 ～ 10
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	-	3 ～ 20	1 ～ 10
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12	g6	13 ～ 20	5	12 ～ 24	-	3 ～ 20	1 ～ 10
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	12T	g6	13 ～ 20	4	12 ～ 18	-	3 ～ 20	1 ～ 10
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16	g6	17 ～ 25	8	16 ～ 32	-	5 ～ 20	1 ～ 12
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	16T	g6	17 ～ 25	6	14 ～ 24	-	5 ～ 20	1 ～ 12
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20	g6	21 ～ 35	8	20 ～ 40	-	5 ～ 20	1 ～ 17
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	Black Oxide	Directly Quenched	20T	g6	21 ～ 35	6	18 ～ 30	-	5 ～ 20	1 ～ 17
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6	g6	6.5 ～ 12	3	6 ～ 12	-	2 ～ 12	1 ～ 6
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	6T	g6	6.5 ～ 12	2.6	6 ～ 12	-	2 ～ 12	1 ～ 6
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	8	g6	9 ～ 15	-	8 ～ 16	-	2 ～ 15	1 ～ 7
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10	g6	11 ～ 20	5	10 ～ 20	-	3 ～ 20	1 ～ 10
-	1	10 Days	10	Large Head	Diamond	Taper R	[Steel] EN 1.1191 Equiv.	No Treatment	Directly Quenched	10T	g6	11 ～ 20	4	12 ～ 16	-	3 ～ 20	1 ～ 10

1
2
3
4
Next >>

Back to the Category Locating Pins / Positioning Pins / Centring Pins

Technical Drawing - Locating Pins / Positioning Pins / Centring Pins

Specification Tables - Locating Pins / Positioning Pins / Centring Pins

■Large Head

Part Number

P
0.01mm Increment

B
0.1mm Increment

R
1mm Increment

G
1mm Increment

L
1mm Increment

M
(Coarse)

* Tightening Torque
N•cm

(W)

Type

Tip
Shape

D dim. Tolerance
g6

A Shape, C Shape only

B Shape only

(Round)
LPGJ
LPGG
LPG
LPGB
LPGR
LPGS
LPGD
LPGC

(Diamond)
LPDGJ
LPDGG
LPDG
LPDGB
LPDGR
LPDGS

LPDGC

A
B
C

-0.004
-0.012

6.50~12.00

2.0~40.0(12.0)

Shape A
R≥P/2

Shape C
R≤P/2

Shape B
G≤P

6~12

M2.6

-0.005
-0.014

9.00~15.00

2.0~40.0(15.0)

8~16

225

3.5

11.00~20.00

3.0~50.0(20.0)

10(12)~20

461

10T

6(12)~16

225

-0.006
-0.017

13.00~20.00

3.0~50.0(20.0)

12~24

461

12T

8(12)~18

225

17.00~25.00

5.0~50.0(20.0)

16~32

1911

16T

10(14)~24

784

-0.007
-0.020

21.00~35.00

5.0~50.0(20.0)

20~40

1911

20T

12(18)~30

784

Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
B dimensions in ( ) and L dimensions in ( ) are for Diamond Shape. Note the strength of under-head part. >> P.1566 Please confirm pilot hole depth on >> P.1566. Holes may go through.
* The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P. 2297.) Not applicable when using locking materials or lock washers.

Round Shape Unit Price

Diamond Shape Unit Price

EN 1.2510 Equiv. Hardened
LPGJ

Hard EN 1.2510 Equiv.
LPGG

EN 1.1191 Equiv.
LPG

EN 1.1191 Equiv. Black Oxide
LPGB

Hard EN 1.1191 Equiv.
LPGR

EN 1.4301 Equiv.
LPGS

Hard EN 1.4301 Equiv.
LPGD

EN 1.4037 Equiv.
LPGC

EN 1.2510 Equiv. Hardened
LPDGJ

Hard EN 1.2510 Equiv.
LPDGG

EN 1.1191 Equiv.
LPDG

EN 1.1191 Equiv. Black Oxide
LPDGB

Hard EN 1.1191 Equiv.
LPDGR

EN 1.4301 Equiv.
LPDGS

EN 1.4037 Equiv.
LPDGC

10T

12T

16T

20T

■Straight

Part Number

P
0.1mm Increment

B
0.1mm Increment

R
1mm Increment

G
1mm Increment

Unit Price

Type

Tip Shape

EN 1.2510 Equiv. Hardened
LPCJ

Hard EN 1.2510 Equiv.
LPCG

EN 1.1191 Equiv.
LPC

EN 1.1191 Equiv. Black Oxide
LPCB

Hard EN 1.1191 Equiv.
LPCR

EN 1.4301 Equiv.
LPCS

Hard EN 1.4301 Equiv.
LPCD

EN 1.4037 Equiv.
LPCC

A Shape, C Shape only

B Shape only

LPCJ
LPCG
LPC
LPCB
LPCR
LPCS
LPCD
LPCC

A

B

C

6.0~10.0

10.0~25.0

Shape A
R≥P/2

Shape C
R≤P/2

Shape B
G≤P

7.0~12.0

11.0~25.0

8.0~16.0

13.0~30.0

9.0~20.0

15.0~40.0

11.0~20.0

19.0~50.0

14.0~20.0

23.0~50.0

18.0~25.0

28.0~60.0

22.0~30.0

35.0~60.0

26.0~30.0

44.0~60.0

The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P. 2297.) Not applicable when using locking agents or spring washers.

Alterations - Locating Pins / Positioning Pins / Centring Pins

Products homepage

Basic information

Shape (Head, Mounting Method)	N/A	Type (Mounting Side)	Internal Thread	ISO Tolerance (Head)	0/-0.01

Configure

231Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Type (Basic Shape)
- Large Head
- Straight
Clear
Shape (Head, Tip View)
- Tapered
- Taper R
- Rounded R
Clear
Material
- Steel
  - EN 1.1191 Equiv.
  - EN 1.2510 Equiv.
- Stainless Steel
  - EN 1.4037 Equiv.
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- No Treatment
- Black Oxide
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- No Treatment
- Directly Quenched
Clear
[D] Diameter (Mounting Side)(mm)
6

6T

8

10

10T

12

12T

16

16T

20

20T
Clear
ISO Tolerance (Mounting Side)
g6
Clear
[P] Diameter (Head)(mm)
[6.5-35/0.01mm Unit(s)]
Clear
[M] Diameter (Screw)(mm)
2.6

3

4

5

6

8

10

12

16

20
Clear
[L] Length (Pin)(mm)
[6-40/1mm Unit(s)]
Clear
G(mm)
[1-35/1mm Unit(s)]
Clear
Length of Locating Side B(mm)
[2-20/0.1mm Unit(s)]
Clear
R(mm)
[1-500/1mm Unit(s)]
Clear
Type
- LPCA
- LPCB
- LPCBA
- LPCBB
- LPCBC
- LPCC
- LPCCA
- LPCCB
- LPCCC
- LPCDA
- LPCDB
- LPCDC
- LPCGA
- LPCGB
- LPCGC
- LPCJA
- LPCJB
- LPCJC
- LPCRA
- LPCRB
- LPCRC
- LPCSA
- LPCSB
- LPCSC
- LPDGA
- LPDGB
- LPDGBA
- LPDGBB
- LPDGBC
- LPDGC
- LPDGCA
- LPDGCB
- LPDGCC
- LPDGGA
- LPDGGB
- LPDGGC
- LPDGJA
- LPDGJB
- LPDGJC
- LPDGRA
- LPDGRB
- LPDGRC
- LPDGSA
- LPDGSB
- LPDGSC
- LPGA
- LPGB
- LPGBA
- LPGBB
- LPGBC
- LPGC
- LPGCA
- LPGCB
- LPGCC
- LPGDA
- LPGDB
- LPGDC
- LPGGA
- LPGGB
- LPGGC
- LPGJA
- LPGJB
- LPGJC
- LPGRA
- LPGRB
- LPGRC
- LPGSA
- LPGSB
- LPGSC
Clear
Shape (Head, Outline View)
- Round
- Diamond
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

6 Days or Less

10 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

[Precision] X-Axis / Cross Roller
MISUMI Standard Price : 311.07 € Shipping Days: 7 Days
Angles - Resin
MISUMI Shipping Days: -
Centring bushes / collar / brass
MISUMI Shipping Days: 9 Days
5 Series / Sheet Metals
MISUMI Standard Price : 1.33 € Shipping Days: Same day